In the electronic industrials, power control of AC motors is commonly used. For example power control of a washing machine motor, a vacuum cleaner motor or a coffee machine motor. The company Rejlers Ingenjörer AB has many projects where power control of AC motors is included. A prototype card for this task can save time and money for the company in the future and this is the reason for this thesis.The motors are power controlled by a TRIAC and control of the trigging pulses to the TRIAC. This card is modularly built and can easily be adapted for future projects where the power control of AC motors are included.The prototype card can be used as a subsystem in a larger electronics projects or as it is in lab environment for testing and evaluating new motors..

Syftet med detta arbete är att undersöka hur förändring av material påverkar varseblivningen av objekt när formen lämnas oförändrad. Detta kan vara av intresse då spel med realistisk grafisk stil blir mer och mer högupplöst vilket samtidigt ställer högre krav på de grafiska utvecklarna att framställa verklighetstrogna material.Jag har utfört en kvalitativ undersökning med personintervjuer av sex personer. Dessa sex personer har fått se tre objekt där de fått definiera objektets syfte. Intervjupersonerna fick sedan se objekten med olika material där mina frågor haft som mål att få respondenten att motivera uppfattat material samt det uppfattade materialets egenskaper. De intervjuades motiveringar om objekt och material har jag sedan tolkat utifrån litteratur om psykologi, främst om kategorisering som George Lakoffs bok "Women, Fire, and Dangerous Things" (1990) beskriver.Min undersökning har visat att uppfattningen av textur kan förändra ett objekts syfte och funktion.

This report describes a thesis done at the Jönköping University of Technology. The aim of this thesis was to create conditions to optimize an existing automatic electrostatic coating system by changing the technology for dispensing lacquer. To select the technology, a study of different dispensing techniques carried out which concluded that the piezoelectric membrane and electrostatic atomization are the most interesting techniques.In order to perform tests with dispensing techniques a demonstrator has been optimized. The controller and PC software of the demonstrator has been programmed to be able to send out PWM signals that control the dispensers. An adapter card was designed to control the piezoelectric membrane and a steering link to the electrostatic atomization has been developed for PWM signals up to 500V.The work has laid ground for a demonstrator where further testing of the dispensing technologies can be performed..

This Thesis in Military Technology deals with experiences drawn from the forced introduction of Weapons Station 01, 2009. The work aims to identify the experiences regarding the forced procurement of military equipment to see how they can develop normal and fast procurement of equipment. The main conclusions of  this work, is to achieve greater capability and increase the military utility, are: -          Common objectives and priorities of stakeholders-          Response and joint types shall determine requirements for system-          Ensure an integrated project team also at lower levels-          Engage the integrated logistic support early in the materiel process-          Include Armed Forces staff as early as possible in the testing and validation-          Prioritize work to facilitate the rapid development of decision on use (BOA)-          Provide back up for increased redundancy in the mission area .

Poorly maintained forges are a common sight in the province of Gästrikland. Because of their changed appearance, possible move from the origin location and poor items related knowledge they will rarely qualify for the range of funds available through Länsstyrelsen. Therefore this study deals with the problems associated with the forges in southern Gästrikland, i.e. Hedesunda and Österfärnebo parishes.The aim of the study is to increase the items related knowledge of forges and perhaps form the basis for restoration projects in the area. Eleven forges have been examined and the changes they have undergone have been highlighted.A forge was erected on the farm and was used for the households needs such as producing and repairing tools.

The main aim of this research was to investigate four humour styles, affiliative, self-enhancing, aggressive, and self-defeating humour, and compare these with emotional perception. Forty-eight persons took part in the research, 27 women and 21 men living in the southern part of Sweden. Two humour tests were used: the Humour Scale Questionnaire ? HSQ, with 32 items, and a newly composed video test, assembled after pilot testing from 26 video clips, the Humour Video Questionnaire ? HVQ. To measure perception and interpretation of emotion, the revised version of the ?Reading the Mind in the Eyes? Test was used.

The purpose of this thesis was to create a saw pattern program for the sawmill industry. I have chosen to focus on the module that describes the shrinking on the wood. There are several theories about how the wood deforms by shrinking. Several hypotheses were simulated in the program and after testing them I decided to use only one of them (hypothesis C). The program is written in Visual Basic .NET and I choused that program language because it is easy to do changes in the layout. Another great advantage in Visual .Net is that you can mix different languages in the same program.

The purpouse of this study is to find out how and if a Content Managment System (CMS) can benefit from applied User Experience Design (UX). A work project has been executed where a client wanted the students to create a user friendly CMS for adding content to a global hotel review site. A prototype of a CMS was created based on literature studies about UX and CMS. The prototype of the user friendly CMS was then tested through user tests and interviews with key users. After input from the key users the prototype was changed until the users were satisfied with it..

Storing kinetic energy in a flywheel allows for more efficient driving of electricvehicles. Research in this area is in progress at Uppsala University, where a flywheelwith magnetic bearings encased in a vacuum chamber is being constructed. To makethis possible methods for measuring the current through the electromagnets in thebearings and temperatures in the flywheel need to be developed. This has been thepurpose of this report. The current measurement resulted in a resistive method, andthe implementation of eight measurement circuits in the system.

The market for heavy duty engines is constantly requiring engines that should be more andmore powerful, while still maintaining low fuel consumption. As a result of increasing enginepower, the engine and coolant temperature increases as well due to insufficient coolingperformance (because of design issues, cost etc.).Also, emission legislations, both current and future, require more and more measures to betaken by engine manufacturers. One way of meeting the legislations is the use of cooled EGR(Exhaust Gas Recirculation), which also lead to increased coolant temperatures.Both these factors also naturally lead to increased engine oil temperatures, the consequencesof which are not thoroughly investigated.This thesis project aims to investigate effects of high temperatures on engine oil degradation,with focus on the greatest degradation process: oxidation. To do this several engine runs havebeen performed on a 310 hp engine with EGR to see what happens to the engine oil in a realengine when exposed to high temperatures. During the tests oil samples have been taken andanalysed for important parameters.As a complement to these engine tests some laboratory oxidation testing have also beenperformed, to be able to compare engine test data with laboratory tests.One goal of the project was to try to formulate an empirical oxidation model, which would beable to predict oil oxidation levels in an engine, given any running parameters.

Abstract? ?there is no reason?to assume that prehistorians cannot study ancient symbolism and beliefs. The question remains, however, how best to study symbolism within the material confines of archaeological research?(Fogelin 2007:63)With my essay I would like to bring up the meaning of the soapstonelamp for the Thule culture in Greenland. Humans in the arctic area, from the same in the north of Scandinavia to the inuites in Greenland, have a common way of viewing the world that stems from anemismen.

After I heard that two deadly accidents in farming 2003 were created by work with cattle, I got the idea of writing this degree project. So far there are not too many reports written about safety for the worker nor the animal. Therefore it will fit in with a report about safe handling of free stalled cattle. The Swedish Board of Agriculture would also like to do an information material about outside stalled cattle with this degree project as a background. The collecting of material was made by visiting farmers. The goal was to visit 15 ? 20 herds and when this is being written 19 herds have been visited.

The purpose of my study is to investigate whether luck egalitarianism can be savedfrom its inability to draw a line between risks which can reasonably be expected to beavoided, and risk which can not. Such a demarcation is of particular importance forthis influential theory of distributive justice, since it serves to judge whether a personis entitled to compensation for a bad outcome of a taken risk, or not. Testing theintuitiveness and coherence of various contending principles for how to separateavoidable risks from unavoidable ones, I conclude that luck egalitarianism seemsunable to draw a clear line between the two kinds of risks. Instead the theory appearsto be dependent on conceptions of a 'normal life', making it remarkably vague.Furthermore, I argue that luck egalitarianism seems unable to manage without takingsufficientarian and utilitarian concerns into account, for the purpose of decidingwhich risks are avoidable, and which are not..

There are some key elements which distinguish a general operating system, such as Linux, from a Real Time operating system, such as OSE. The later belongs to the category of soft Real Time systems while Linux is a general operating system, with significantly improved real time properties after version 2.6. These improvements make it interesting to compare the two systems.When comparing two operating systems, there are a number of issues which have to be considered. One way to measure the performance of the systems is by studying the time consumption for the same functionality and hardware.During the study, the items that appeared as the most important for the performance of the systems, were: process primitives, system primitives, interprocess communication, context switches and interrupt latency.This work demonstrates that it is possible and reasonable to do performance testing on two different operating systems. The implemented tests cover a number of basic functionalities, which appeared to be the most crucial ones for the performance of the systems..

Syftet med detta arbete är att undersöka hur förändring av material påverkar varseblivningen av objekt när formen lämnas oförändrad. Detta kan vara av intresse då spel med realistisk grafisk stil blir mer och mer högupplöst vilket samtidigt ställer högre krav på de grafiska utvecklarna att framställa verklighetstrogna material.Jag har utfört en kvalitativ undersökning med personintervjuer av sex personer. Dessa sex personer har fått se tre objekt där de fått definiera objektets syfte. Intervjupersonerna fick sedan se objekten med olika material där mina frågor haft som mål att få respondenten att motivera uppfattat material samt det uppfattade materialets egenskaper. De intervjuades motiveringar om objekt och material har jag sedan tolkat utifrån litteratur om psykologi, främst om kategorisering som George Lakoffs bok "Women, Fire, and Dangerous Things" (1990) beskriver.Min undersökning har visat att uppfattningen av textur kan förändra ett objekts syfte och funktion.