Abstract Over the years the consciousness of risk has grown. It?s hard to influence risks, therefore there are guidelines stating that significant risk must be included in the annual report. This paper is a case study; the purpose was to examine how four Swedish listed companies chose to disclose their internal and external risks. Risk is initially described in general sense and then it figures to what constitutes an economic risk.Through a case study of four Swedish listed companies? annual reports we have, through qualitative methods found how the companies chose to disclosure their risks.

To get the maximal output of your exercise in gym machines, there are different factorsto be considered. For example the strength of the muscle varies dependent on the positionof the muscles. To get the best results of the exercise the load has to reduce and increaseat specific positions.This study was made in cooperation with Caretaker Scandinavia AB, a company forsales, marketing and development in health care. They are general agent for Nordic Gymwho works with manufacturing of equipment and machines for gym and fitness.The aim of this study was to generate a method of measurement to evaluate and controlthe biomechanics of Nordic Gym´s workout equipment. A protocol for an ergonomicanalysis on the equipment has also been elaborated.One of the methods to measure the biomechanics was to measure the torque through thewhole movement.

Abstract Over the years the consciousness of risk has grown. It?s hard to influence risks, therefore there are guidelines stating that significant risk must be included in the annual report. This paper is a case study; the purpose was to examine how four Swedish listed companies chose to disclose their internal and external risks. Risk is initially described in general sense and then it figures to what constitutes an economic risk.Through a case study of four Swedish listed companies? annual reports we have, through qualitative methods found how the companies chose to disclosure their risks.

This Thesis in Military Technology deals with experiences drawn from the forced introduction of Weapons Station 01, 2009. The work aims to identify the experiences regarding the forced procurement of military equipment to see how they can develop normal and fast procurement of equipment. The main conclusions of  this work, is to achieve greater capability and increase the military utility, are: -          Common objectives and priorities of stakeholders-          Response and joint types shall determine requirements for system-          Ensure an integrated project team also at lower levels-          Engage the integrated logistic support early in the materiel process-          Include Armed Forces staff as early as possible in the testing and validation-          Prioritize work to facilitate the rapid development of decision on use (BOA)-          Provide back up for increased redundancy in the mission area .

Acquiring a former station building can mean that the property owners must familiarize themselves with a lot of planning and building regulations. After the new Planning and Building Act code into force in 2011, the responsibility lie on the developer to ensure laws and regulations. Based on the regulatory framework that is available occurs sometimes balance issues, between care requirements and building codes. The station building in Ormaryd was acquired in 2009 by two individuals who intended to accommodate office and retail space in the building. In doing so a new local plan of the area was established, including regulations on how the building could be used. By including road safety and noise, the risk was not considered appropriate to use the station building for housing.

Historically transformers with system earth equipment have been modeled as open circuits in zero sequence. This approximation has been satisfying, but lately it has been discovered that equipment on one side of the transformer have responded to faults that occurred at the other side. Most of these problems took place when the majority of the system on the secondary side of the transformer contained cables. These findings have led to questioning whether or not the former model of the transformer in zero sequence is correct. This report investigates if it is necessary to represent the transformer in zero sequence in another way than it is usually done today.

Animals can be ill and need veterinary care for many reasons. The conditions can be more or less emergent, some can even be life-threatening. When an animal is in a life-threatening condition you can save the animals life just by having the right equipment near-by and ready to be used. This literature-study help you, as an active working veterinary nurse, with which these conditions are that can show up in your emergency ward and what you should have near-by to give animals with acute life-threatening conditions the care they need. The author also looked at work tasks at the emergency ward and found out that in Sweden it is not defined who can and/or should execute them. Interviews were also done with nine of the largest small-animal hospitals in Sweden to compare the studies found with the Swedish emergency wards.

This master thesis is made of two parts. The first part concerns the method and results ofdesigning a motion control system for a piece of research-equipment called BIRGIT. Theequipment is made to be used for research on eyemovements. In the second part, a computermodel of a part of the balance organ in the inner-ear is developed. The work has been done atthe Bernadotte laboratory at S:t Erik Eye Hospital.The equipment the control system is made for is a so-called rotationchair.

Detta examensarbete har utförts i samarbete med Svedala Compaction Equipment AB. Examensarbetets primära mål var att reducera höjden på ROPS tillhörande asfaltvält CC 422. En sänkning medför ett friare vägval och billigare transporter. Hittills har vägvalet påverkats av broar, viadukter och andra hinder. Med hjälp av riktlinjer från Svedala Compaction Equipment AB och Fredy Olssons modell för integrerad produktutveckling togs kriterier fram, vilka användes vid bedömning av olika lösningsförslag.

This essay concerns the possible tabloidization of Swedish daily newspapers. To investigate if tabloidization theory could be supported, a case-study is made using the isolated crisis of an especially big forest-fire in the county of Västmanland in Sweden in the summer of 2014. One local paper of the daily press, Vestmanlands Läns Tidning and one tabloid-paper with a national spread, Aftonbladet, are compared using quantitative content analysis to see whether there are similarities or differences enough to support or reject that the daily press is under influence of tabloidization. The results of the two papers news coverage of the fire are compared in three main categories; Theme, Source and Value-words. These categories represent three of tabloidization?s main criteria; ?soft news?, personification of sources and more use of words that connote strong values as signs of a lower quality in journalism.

The subject of this bachelors degree project is an interior layout for road ambulances.Landstinget Västernorrland (LVN) wanted a layout concept that would be used to com- municate their design intentions to the ambulance producers during their purchase process.Designing ambulance interiors is an extremely complex process since there so many fac- tors to take into consideration. It ?s not just about taking the equipment and place it where there is space left in the cabin. You have to start with the user in focus and the tasks that are to be performed in the ambulance environment.It ishard to find design solutions that will fit 100% of the ambulance personnel?s working routines for 100% of the tasks.

This degree project has been carried out in cooperation with Gedevelop in Helsingborg.Gedevelop has developed a camera that can calculate the weight of a liquid glass mass.Because of the density and viscosity changes in the glass, the weight information issometimes incorrect given. Glass industry is today addressing the problem by an operatorperforming a manual weighing of a few bottles which, in turn, calibrates the camera system.The project aimed to develop an automated system to control the weighing of glass bottles forglass industries. This system must be so flexible that it can be easily mounted on plants withdifferent production equipment around the world.The project includes design and construction of equipment that meets the requirementsformulated together with Gedevelop. Work has been done both in Halmstad and Helsingborgand has included both calculations and review of the theory to understand the forces thatinfluence the design of different construction parts. A prototype was produced that meets theoperating requirements for the design and can be used in testing features.

The global biodiversity loss is mainly due to human activities such as an intensification of forestry. Boreal forest ecosystems in Fennoscandia are characterized by disturbances such as forest fires, storms and floods. However, industrial forestry practices suppress forest fires and change the landscape, leading to a loss of habitats and associated species. Particularly lichen species with slow adaptation abilities and a strong substrate specificity face an extinction debt in boreal forests since their substrates are long-lived but no longer created. In this study the species-substrate relationship of two red-listed forest-fire dependent lichen species Carbon-icola anthracophila and C.

The moisture content in 10 deliveries of tree parts and 10 deliveries of wood residues were measured with different methods to analyze the quality of procedure used at Dåvamyran today. At the same time a survey was made on the measure procedures used at heating plants in Sweden The majority of the heating plants in Sweden use weight and moisture content as base for payment but at some plants only volume. The moisture content is usually estimated by drying wood chips in an oven but few plants a visual estimation is used. At few plants moisture content is estimated spectroscopicily. The techniques using near infra read light and other electromagnetic are still at a test stage. The methods of measurement used today are quit unreliable for the individual deliveries and there is a risk for systematic mistakes.

THE CONSTANT IMPROVAL AND REFINEMENT OF THE MOBILE TECHNOLOGY HAVE MADE IT POSSIBLEto use video in settings where such use couldn't be motivated before, due to economicaland practical reasons. The purpose of the study was to identify and explore possiblechallenges in interorganizational use of video during emergency response work. Thiswas done by a case study of a system designed for the use of video in such situations.The study focused on operational challenges for the fire and rescue services and thehealthcare organisations, where the main challenges identified were intended to beanalysed and discussed in terms of design. The empirical results were gathered throughqualitative interviews with representatives from the fire and rescue services and thehealthcare organisations in Göteborg. This material made it clear that contextual aspectsof emergency response work lead to a couple of challenges connected to the use of videoin such situations.