Since the turn of the millennium a sharp increase in the interest for bio energy has been observed. Important reasons for this growing interest can be due to the fact that fossil fuels are a finite resource. A net discharge of greenhouse gases occur when fossil fuels are burned. The discharge of greenhouse gases are considered to be the main reason to the greenhouse effect. Means of control to increase the use of bio energy has been introduced and, as intended, the use of bio energy has increased. As a result of the legal provisions the ability to pay for bio energy has increased, which the forest industry view as a problem.

Today we can create digital 3D models which can be realised almost instantly through production methods such as 3D printing and computer controlled milling.What if this same technology could be applied to the development and construction of terrain parks?With snow as the material tools could be developed using similar principles to design and sculpt the surface, only on a larger scale.How would terrain park designers adapt their process to use this new technology? In this Industrial design thesis I explore how the ideas of the terrain park designer can be expressed through such a system with focus on the designers knowledge and skill without the need to learn complicated 3D programs.Sketch, create, ride. .

The everyday work at a staffing agency and how its leaders deal with the problems that appears: A case study at Maxkompetens.The purpose of this paper is to increase the understanding of how leaders at a staffing company deal with the everyday problems that arise from a geographically dispersed workforce.The staffing industry has grown by 30-40 percent annually and has over the past 15 years been the fastest growing industry in Sweden. This shows that the interest and demand for the staffing industry and its activities are now rising at an increasingly faster pace. This is an industry that is operating under specific conditions and with a geographically dispersed workforce. This will make the leaders of a staffing company to an important link between the staffing leaders and the staffing personnel.The relationship between the staffing company's leaders and its personnel is important, but not completely trouble free. Difficulties arise in that the employees may be located in different places and at various client companies with the result that the leaders of the staffing company cannot have a daily personal contact with their geographically dispersed personnel.We have used a qualitative approach on our paper and our empirical methodology has been a case study with ethnography and interviews.

The concept of green IT is a hot topic in the industry right now. The requirements forenvironmental friendliness are becoming increasingly common. There is a lack of knowledge andunderstanding of what green IT means and how it can be achieved. Our study shows that the useof ICT can never become entirely green, but a lot can be done to become greener. We haveproduced a balanced scorecard which in theory leads to better governance, increased knowledgeand a common picture of what the work of greening IT means for employees and theorganization.

The Swedish automotive industry has since way back been struggling with bankruptcy, abroad buy outs and staff cuts. Competition and pressure on prices are two factors that affect the automotive industry. Because of this, the companies are pressured to continuously developing their work in addition to be able to compete on the market. The aircraft industry has successfully managed to implement additive manufacturing (AM) and for motorsport has several components manufactured with AM been used. When AM is used as a manufacturing method, there are a number of advantagesthat follows.

Corporate Social Responsibility (CSR) is a topic that is becoming increasingly important in today's society. CSR is a concept whereby companies voluntarily integrate social and environmental concerns both in their business but also in interaction with their stakeholders. The society of today sets high expectations for how companies take their social responsibilities, especially in industries where the risks to individuals and the environment are high. In this study, we tried to answer the following questions; what kind of responsibility do companies in the plastics and chemicals industry claim to take and why might this be due? What differences exist between the investigated companies in the industry and what may these differences be rooted in? The purpose of this study was to obtain an understanding of the interest in working on sustainability in the plastics and chemicals industry.

Since a few years back television has been on a verge of an enormous digital change. Web-TV is now growing at an incredible rate and is said to completely change the way we consume TV. The purpose of this essay is to determine and gain an understanding of how representatives of the broadcast industry looks at the phenomenon of web-TV and especially the different kinds of online video services and how they believe this will affect the television. Methods used are qualitative interviews which we compared with previous studies on the subject and acknowledged communication theories. The respondents were people with good insight and understanding of the media and TV industry.

This paper aims to analyze the legal functions and characteristics of bills of lading in their basic form to examine the legal framework for the adoption of electronic bills of lading under Swedish law. With a comparative analysis against English law, particular attention is given to the 'document of title' function. This has been claimed to pose challenges in the transition to electronic bills of lading. While Swedish law presents potential parallels, critical aspects like negotiability and indirect possession require resolution. It analyzes international regulations such as the Rotterdam Rules and Model Law, addressing challenges and potential solutions for digitalization.

Sudan has always showed great potential in the poultry industry, but it has not been until now that this potential has blossomed and is growing quickly. As large agribusinesses1are taking over the market shares within the urban areas, smallholders2 have been put out of business. They are not able to compete with mass production and lack financial assets to improve their production techniques. Contract farming is defined as initiatives from agro industrial companies to secure access to smallholder produce and has in developing countries become a way of allowing the poor to participate in a larger market (Farrington, 1999). The aim with this study was to investigate the suitability of implementing the contract farming concept within the poultry industry in Sudan today. The study is a qualitative field study and the authors have conducted qualitative interviews with respondents involved in the poultry industry in Sudan.

This is a pattern project for textiles, with main purpose to develop and challenge my design process and to experiment with a mix of different printing techniques. The goal of the project was to create three textile individuals as representatives of my experiments, inspired by natural surfaces.The world of fashion have been an inspiration and has been the model for these textiles, with its powerful and playful patterns. With the world of fashion as a model, I also chose to work with the materials habotai silk and silk velvet. The qualities of these materials has also been influential in my design language.The work has been very focused on experiementation and exploration, and resulted in three printed fabrics that I have chosen to call Björkalm, Lindstam and Lavbädd..

There are two objectives of this study.The first one was to study the new instrument Deltack fromPrufbau, and with the new knowledge, study the interaction between blanket and paper.Deltack is a new instrument to measure the ink splitting force. Blankets from an earlier study doneby GATF have been montered on 12 different Deltack print forms and those have together with Deltackbeen the base for this project.This study together with information from GATF?s study shows that some of the blankets have ahigher capability to adsorb ink. Those blankets generate a sharper shape on the force curve, they havea lower dot gain, but they print not as good solid..

Mobile devices such as tablets and smartphones are quite common in this day. The author of this thesis wanted to know how common these mobile devices are in the building industry and how they are used and what potential an app could have. The author thus conducted an investigation on this matter, mainly in the form of interviews.Answers given by the interviews were then used as a basis to survey the usage of mobile devices and the usage of different kinds of apps. An investigation of different apps with the potential to be used by professionals in the building industry has been carried through. Apps which manage such things as scanning documents, measuring distances and handle communication.

Construction waste from the housing industry includes all unnecessary consumption of building materials. The definition of construction waste is construction materials that has not been built in and becomes waste. Constructions waste can be divided into two types of contributions: operational and work site contribution. Some of the common construction materials in housing industry have such low usage level as 75 % and the rest becomes construction waste. Low usage of construction materials creates unnecessary costs and has a major environmental impact.

Problem: The relations between first and second tier suppliers within the automotive industry have changed drastically during recent years. Previously involving the supply of simple components, today the relation involves collaborative product development of complex subsystems. The situation is rather new for the actors, hence there are a number of problems that act as restraints for the collaboration. In order to come to terms with these problems, it is important to determine the underlying causes. Purpose: The purpose of this thesis is to make a survey of the main problems in the collaborative product development between first and second tier suppliers within the Swedish automotive industry.

The amount of cargo has since the 1970s increased in Sweden and the road traffic accounts for a large part of the transported volume. In Stockholm County the amount of cargo is calculated to be doubled in size from year 2001 to 2020 which means a greater need for transport is required. Much of these transports are being carried out by haulage companies of varying sizes which acts externally as carriers for their customers. All of this despite a greater awareness, laws and demands regarding environmental performance.The trend shows that the haulage industry in Sweden are moving towards fewer but larger haulage companies, which means that the competition is getting tougher for the smaller haulage companies. Smaller haulage companies and research about their competitive strategies is a neglected part of this industry.