Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Konservatorprogrammet15 hpInstitutionen för kulturvårdGöteborgs universitet2015:09.

The purpose of this study was to investigate produced laser data from the new national height model's airborne laser scanning in Sweden, what quality it has and whether it can be used for forest management planning. From airborne laser scanning one can obtain information on forest variables such as tree species, height, diameter and basal area. Norra skogsägarna is the principal employer of this project and they wanted know to the quality of the laser data which needs to cope with their standards. If the laser data the quality required it can replace some of the operations performed by field planners. To examine the quality of the produced laser data a control tax assessment has been performed in 30 forest departments. This was done in an objective manner.

The first aim of this thesis is to descriptively identify and chart the activities of the strategic intelligence and environmental scanning that take place at the regional collaboration network Regionförbundet Örebro. This identification is essential in reaching the comprehensive and primary aim of the thesis: to discuss, through normative discourse, what the options of improvement are and in which ways systematic operations can be integrating parts in the organization. In order to offer guidance of development from the perspectives of environmental scanning, the question at issue has emanated from activities concerning the present methods of working at Regionförbundet Örebro.During the creation of this thesis, several interviews have been made with people who are regarded to be key roles within the regional collaboration network. An analysis has been made, based on governing documents and answers from the interviews, where possible improvements of the business have been identified. The inferences become parts of a greater potential of amelioration since they are presented as active solutions and proposals that can be directly adaptable to the organization.Our proposals of improvements/ameliorations are constituted by a number of concrete/explicit points such as: a wider public information supply and an introduction of several annual routines and methods..

The tribo system ice-curling stone was investigated in order to understand the mechanisms behind the stones' behavior on the ice sheet. The problem with non-identical stones should also be addressed.The stone curls, that is, its sliding path deviates from a straight line to the right for a clock-wise rotation and to the left for a anti-clock-wise rotation. Several mechanisms to explain this behavior have been proposed over the years but none has been successful.By carrying out experiments at the local curling rink and studying silicon castings of ice- and stone-surfaces with scanning electron microscopy and vertical scanning interferometry, it has been decided that the curl is not due to dry friction, ice-debris or the difference in friction on the left and right side of the stone. The side force comes from the fact that the friction is higher at the back of the stone than at the front.The contact between stone and ice is never completely dry, nor in the hydrodynamic lubrication regime. It is probably a combination of hydrodynamic lubrication and a contribution from mechanical scratching of the ice.

This thesis concerns partial discharges in stator windings and the possibility of analyzing data using statistical methods. Partial discharges, or PD, are a physical phenomenon in which discharges occur locally due to large electric fields. PD can occur in or adjacent to the insulation of stator windings and causes breakdown of the insulating materials. PD measurement can provide an idea of how widespread the PD activity is. A technique to measure and analyze PD that has become very popular over the last few decades is phase resolved PD patterns.

The aim of this Master?s thesis is to examine the environmental scanning by the employees and politicians at the central administration at the County Council of Kalmar län. The background of the study is the closing of the administration library in January 2003, which gave more tasks to the hospital libraries of the County Council.The main questions of this study concerns the information needs of the employees and politicians, what electronic sources they prefer to use to satisfy those needs and if they are experiencing a need for more support and help, from a librarian or by the development of a common catalogue of hyperlinks. All 104 persons in the population were asked to answer a questionnaire on the Intranet. The task was performed by 60 persons.

This thesis concerns partial discharges in stator windings and the possibility of analyzing data using statistical methods. Partial discharges, or PD, are a physical phenomenon in which discharges occur locally due to large electric fields. PD can occur in or adjacent to the insulation of stator windings and causes breakdown of the insulating materials. PD measurement can provide an idea of how widespread the PD activity is. A technique to measure and analyze PD that has become very popular over the last few decades is phase resolved PD patterns.

An increased number of participants in the construction industry is asking for accompanying terrain models to the project in order to get a better understanding of the field. When the desire to create buildings that fit together nicely with the surrounding area is increasing, it becomes more and more important to have a broad base of knowledge about the ground on which the building is to be erected. Terrain models are also very useful in the planning of logistics, documentation for landscape architecture projects, and billings for mass calculations.Surveys for creating terrain models can be performed with laser scanning. The advantage of laser scanning is the time-effective surveying, the detailed information as well as the ability of application in complex environments resulting in a cost-efficient project. With this in mind our thesis was defined in collaboration with the company Bjerking AB in Uppsala in order to investigate if there were any softwares suitable for terrain modeling.

Bergvik Skog is one of the leading forest companies in Sweden who use airborne laser scanning for forestry information. They utilize laser data retrieved by the Swedish National Land Survey to describe the forest holdings and facilitate planning for thinning and final felling operations. However, the possibility to identify stands with clearing needs by using laser scanning data has not been tested in a large scale. The data used in the current study are field data from The Swedish National Forest Inventory in combination with laser data from the Swedish National Land Survey acquired in 2009. The collected data is used to find one or several laser variables that best describe the relationship of the field measured samples with clearing needs.

This thesis work is intended to analyze whether the municipalities has a need for the new technology of mobile mapping.Mobile mapping consists of the technologies of laser scanning, photographing and positioning of streets and roads in city environment and in the countryside. When these technologies are operating together a georeferenced three-dimensional image model is created, which has specific coordinates that states its position on the surface of the earth. Thanks to the laser scanning process even measuring can be performed in this model.The municipal sector consists of many different departments which use visual spatial information. These departments are an interesting target group for this system. Specific departments within the municipal sector, which we considered were the most suitable, have been selected.

Sweden?s forestry legislation was updated in 2010 and a new definition of forest land was introduced. This definition was adapted to the one used by the Food and Agriculture Organization of the United Nations (FAO) for international statistics on the state of the world's forests. It is in short based on the lands ability to grow forest that reaches 5 meters, 10 % canopy closure and has a continuous distribution, according to FAO at least 0.5 hectares. A country-wide laser scanning is now carried out for the production of a new national elevation model; the laser data also provides information on forest height and density.

In a multi-year project at Swerea Swecast AB studies on influence of dissolved gas on inclusions have been made. The knowledge about these parameters could be used to increase the quality of the final steel casting. The purpose of this thesis was to closer examine the impact of the oxygen level on inclusions.The questions asked were:? What was the amount of inclusions at different levels of oxygen?? What was the size of these inclusions at different levels of oxygen?? What does the inclusions consist of at different levels of oxygen?This was studied by measuring and sampling, sample preparation and microscopic analysis using an optical microscope and a scanning electron microscope (SEM). Measurements and sampling was performed at Smålands Stålgjuteri AB in Eksjö and at Swerea Swecast AB in Jönköping.

The aim of this study was to map and date glacial flutings with ice flows deviating from the predominating northwesterly ice flow direction in the southern part of Norrbotten County in northern Sweden, and also to investigate if parts of the glacial landscape are older than previously thought. The traditional view is that most landforms in the area were formed during the late Weichselian (W3). Analysis of the new high resolution elevation model (2 m grid) derived from laser scanning was performed after treating the data with a hillshade tool in ArcMap to reveal terrain features such as flutings. The analysis resulted in a map showing four main groups of deviating ice flows (N-S, NO-SV, SO-NV and S-N) and several westerly ice flows. The majority of flutings with deviating ice flows were found in low terrain.

In order to stay competitive and to be the first choice for customers in a world driven by a high level of competitive advantage, it is important for companies to stay ahead of the competition by conducting thorough market research. Even if this tends to be the case, many products still fail when reaching the market, leaving companies with great losses. The reason for this could be that the development of existing research methods has stagnated, or that they simply lack the ability to find the true answer as to what intentions underlie consumer?s decision making when shopping. Many believe that a new method is desired in order to get a better picture of what customers really think.

Thinning is one of the most important silvicultural activities in middle aged forests, partly to minimize damages and partly because it leads to earlier harvesting revenues and increases the value of the remaining trees. There are many different indices used to describe stand density and thereby the need of thinning in forests today. Studies have shown that forest variables can be estimated with high accuracy using airborne laser scanning and it is likely that the method could also be used to estimate forest density indices. In this study, the possibility of using the forest density index ?H² to determine and map priorities for thinning operations for a forest area was examined.