This paper has evaluated a new type of prosthetic foot, X-Balance, which aim was to facilitate the performance on uneven ground for the user. This study have performed gait analyzes with three prosthetic feet, the X-Balance, Flex-Foot and assure Ottobock9192 on flat and uneven surfaces using 3D analysis system QTM (Qualisys Track Manager) and associated force plates. During the project a prototype of a design that can perform a mechanical gait were manufactured. The prototype has then been used to fulfill the purpose and objective of this study which is to make different final sets that demonstrate differences between prosthetic feet. Gait analyses of individuals have also been performed to get an idea of what normal gait is.

Osseointegrated titanium implants have become a commonly used method in edentulous jaws and today there are success rates in the magnitude of 82 % in the lower jaw and 98 % in the upper. During first year after implantation a fully normal marginal bone loss of 1-2 mm occurs. If the bone loss continues there is a risk of implant failure. High tensions in bone and inflammation caused by bacteria are possible reasons for this problem. It has been shown that a leakage of bacterias occurs between the parts of the implant and there are theories that this has effects on the marginal bone loss. The aim of this thesis has been to increase the knowledge about microbial leakage with help of in vitro tests and virtual simulations.

The purpose with this final paper was to examine how the collaboration between parents and teachers can manifest itself. With collaboration, we mean the dialogue that has to exist between parents and teachers in regards to e.g. how well informed the parents are about the regulated principles on which the education plan is built on, and in which way they can take part in and influence the system. This is to empathize on the fact that a good collaboration between parents and teachers help create a good foundation for the pupil?s ability to learn.The method that we have used are questionnaires given to parents and teachers along with studies of literature both as means of furthering our studies as well as a basis for the design of the questionnaires.

The purpose of this study is to find out the viability in performing final felling in stands with high timber volume or if it´s more profitable to leave these stands to the next owner. Will he or she pay more for the standing stock then the industry? The prices of forest-land have increased significantly over the last couple of years in Sweden and some properties seem to go higher than others. Is this because of higher standing stock volume or can a certain volume/hectare bring a higher price? Maybe a combination of both? This study is based on the the sale-statistics for 2012 from real-estate agency Areal.

In todays high-technological society where the Internet plays a central role in our day-to-day life, many e-retailers are not able to attract customers to complete a transaction on their website. In order to succeed, many e-commerce sites must improve several safety aspects regarding online payment, in order to be perceived as a reliable and secured retailer. The purpose of this paper is to investigate if increment in various combinations and aspects in online payment will in fact improve the customer's perception of the e-retailer and result in completed transactions. In order to investigate this aspect, an experiment was conducted to be able to compare eight independent groups, that each had been exposed to a different security scenario on the online payment website of either a known or unknown retailer. Our results clearly prove that perceived security of the retailer's payment website increases willingness to purchase from the retailer.

This work is a study of subject teachers in social studies and science understand the concept of sustainable development. The work uses a qualitative and a quantitative approach. Teachers in various schools and stages have been answering questions about how they perceive sustainability, how they implement it in teaching and if they feel that school is important for the future of sustainable development at large.The theoretical background is based on environmental ethics as well as the different meanings and definitions of the concept of sustainable development. These theories and definitions are coupled with the empirical results.The study concludes that all teachers throughout the study perceive the concept of sustainable development as something ecological, something that has to do with nature. A few teachers also state economic and social dimensions.Questions about how the teachers in the study implement the concept in their teaching can be seen as three different approaches.

The high level of energy consumption that the industrialised countries have reached and thepollution that this brings has long been a cause for analysis and debate, development and usageof so called renewable energy sources is therefore more important than ever. The energy in theelectromagnetic radiation from the sun is an interesting alternative. One way of harvesting thisenergy is by using solar cells, devices that generate DC current when exposed to electromagneticradiation.The goal of this master?s thesis was to design a solar powered power supply to Syntronic AB?sMidrange platform. The envisioned application is a stand-alone distributed embedded system,for example a node-based temperature monitoring system.

Because of among other things the globalization and a focus on core competencies knowledge has become very important for the companies of today, especially for research-intensive companies. The problem is that the companies become more sensitive to how knowledge is created and spread, that is, how organizational knowledge is created. Especially sensitive are companies who are small, young and research-intensive. The purpose with this thesis is to explore how organizational knowledge is created in small, young and research intensive companies.The theory is based on a five-phase model of organizational knowledge creation and four modes of knowledge conversion described by Nonaka and Takeuchi (1995). These concepts constitute the foundation of the analytical model used in the thesis.The study is carried out by qualitative, highly structured interviews with low standardization.

The purpose of this study was to investigate youth?s experiences of what meaning the nonprofit youth project Husby Marathon had on their social capital and self-identity. In order to answer the purpose a qualitative methodology was used based on interviews with four of the participant youths. Two teories were used, Social capital by Robert D. Putnam and Selfidentity by Anthony Giddens.

In this bachelor thesis a complete prototype of an industrial vibration measurement platform has been developed. By measuring a number of variables such as acceleration, temperature and speed conclusions can be drawn on machinery health. The aim is to evaluate hardware and software solutions for a possible future product. Based on a requirement specification a proper hardware design has be developed. The hardware consists of a four-layer PCB with an ARM Cortex-M3 microcontroller and about 250 other components. The PCB was designed, assembled, tested and finally housed in a box.

This thesis describes how the development of a mechanical enclosure to an alarmsystem proceeded. The project was made on behalf of Inferno Light Indusec AB.The goal set to this housing would offer a home alarm in which Indusec?s uniquesound system would give the customer a new alternative on the market. They wantedto, among other things, create an aesthetically but at the same time affordable alarm.The aesthetic theme is something that is missing in today?s market.

For my advanced degree in archival science, I have organised and catalogued two family archives; man Family Archives ("Gardtmanska släktarkivet") and the Hamnström Family Archives ("Hamnströmska säk- tarkivet"). Though both could be labelled "family archives", there were many differences between the two. The Gardtman Family Archives contained the records of several family members from a period of several centuries, spanning from the early 17th century, to the early 20th century. It was by far the larger of the two archives. A substantial part of the records consisted of documents regarding various agricultural estates the family had owned or been involved with in one way or another.

The subject of this master level thesis in historical osteology, is a study of waste management in the medieval town of Lund. The aims of the study is achieved through looking at the taphonomic aspects of bonefragments from the quarter Blekhagen. The study is divided in two separate sections, one that is a litterature study of what is known about waste management, and another one that contains a taphonomic and spatial analysis. Through examination of the taphonomic variables weathering, average weight and trampling and a spatial analysis, I am able to deduce that there are signs of controlled waste management in the material. It is not possible to draw any general conclusions about waste management in the medieval town however.

To be able to compete on the market environmental Management System has become an important part of operations work. However, many companies still haven?t implemented an environmental management systems due to lack of time and the high costs. One of the companies with this problem is Falu Bildemontering. Their goal is to accredited according to the ISO 14 001 certificate.

This report describes a final thesis done during the spring of 2008 as part of the bachelor degree in computer engineering degree at the School of Engineering in Jönköping.The client is working in the consulting business and is involved in, amongst others, work regarding information security. Within this field they perform so called Threat, Risk and Vulnerability assessments. Today these assessments are done by a predefined method, but many details are controlled by the person documenting the project. A wish was made that the implementation was standardized, it should also ease the task of estimating the need for time and money. The solution for this seems to be a software tool.