During football games neuromuscular fatigue occuring following eccentric movements such as sprint, jump and run that occur during games. To avoid injury, overtraining and performance decreases, it is important to know when players are recovered. The aim of the pilotstudy was to investigate physiological changes that occur during football matches and if they affect the recovery pattern after several games in professional football players. The method was divided into two sub-studies in which 12 professional footballers, in substudy 1 performed counter movement jump (CMJ) and drop jump (DJ) from 40 cm and fill out a recovery form for muscle soreness 36 hours before, 12-16 and 60-64 hours after 11 different competetive games. Blood samples were taken on the players in connection with one match to examine the activity of muscle enzyme creatine kinase (CK) and lactate dehydrogenase (LDH) of the players.

This master thesis was carried out at ELFA, one of the largest catalogue distributors of electronics in northern Europe. ELFA offers a wide selection of products such as measuring instruments, fuses and screwdrivers. The master thesis handles the possibilities of an increase in the internal flow of products. The background to this problem is ELFA?s acquisition of two new companies, which brought the product range in the warehouse from 55 000 to 80 000 products.

The theory that concepts that are interpreted subjectively in building care creates problems in how the concepts are defined in practice within the current governing documents and guidelines for building care. This essay has studied concepts in the building maintenance literature to investigate whether there is consensus in compliance practice within the building process. In the study, 9 concepts have been investigated through conversational interviews and questionnaires answered by practitioners with extensive experience in building care processes. In the survey, an attempt is made, to measure how big or small the consensus is between practitioners who often need to collaborate within the building maintenance process. The investigation shows that existence of the concepts in building maintenance is very common in the theoretical literature examined but is almost completely absent in the craft area. Since laws, regulations, principles, and guidelines have defined concepts to support the decisions in the building maintenance process, it can be concluded that there is a lack of practice for compliance.

The purpose of this thesis is to inquire how a small town can be affected by some planned changes in the physical structure of the town, and how its inhabitants can benefit from those major changes. The town in question is Ulricehamn, and of the four projects considered, two concerns infrastructure. A new railway and a new locality for the major road, today passing through Ulricehamn. The other two projects are run by the local authorities, that is the planning of a modern town park by the lake, and a new public building for cultural purposes. There are no guarantees that any of the four projects will ever be realized, but in the process with this work, they have been considered as already a fact.

Aim The aim of this study was to investigate the attitudes of midwives and gynaecologists at youth health clinics about their own thoughts of risks with unprotected oral sex and testing of orally contagious sexually transmitted infections (STI). The aim was also to investigate the level of knowledge of oral STIs. One further aim was to examine what they thought about the level of knowledge about oral STIs among adolescents and how common unprotected oral sex is within this group and if oral STIs/oral sex is brought up in the form of information or questions during STI-testing.Method Seventy-five youth health clinics all over Sweden were randomly chosen. A questionnaire was sent by mail to the clinics. It included questions about attitudes, knowledge about STIs and information exchange.

Shock absorber units play a key role in establishing the driving dynamics and performance of automobiles. Öhlins Racing has manufactured high-tech automotive shock absorbers for over 30 years. Öhlins Racing?s advanced technology has contributed to over 200 world championships in automobile racing. Öhlin?s manufacturing process has long utilized automated fluid filling equipment during the final shock absorber unit assembly stage. The filling process consists of vacuum pumping the shock absorber unit and subsequent transfer of fluid. Vacuum pumping is necessary to remove residual air from the shock absorber unit prior to initiating the liquid filling stage. The presence of undesirable gases drastically compromises the performance of a shock absorber. The filling degree, defined as the final ratio of air to oil, is determined by the specific filling protocol as well as the specific equipment utilized.The current investigation aims to develop a viable technique to accurately determine residual air content in shock absorber units. If the filling degree can be appropriately quantified for a specific manufacturing process, then the air/oil ratio may be quantitatively related to shock absorber performance. The utilized measurement method must be completely integrated into the manufacturing process to guarantee shock absorber performance specifications according to the manufacturer?s standards. By utilizing the measurement method developed in this work, the manufacturing process, manufacturing equipment and product specifications can all be tailored to provide improved filling conditions.The developed measurement method provides accurate quantification of the filling degree under a wide range of processing conditions. The method establishes the relative quantity of air in the shock absorber unit by performing in-situ compressibility tests. The fill ratio can be controlled and varied by manipulating the vacuum pressure exerted during the filling process. Performance tests, however, indicate no correlation between filling degree and unit performance..

Among those who graduate from the various schools of Social work in Sweden are a great majority women. At the same time men are sought after in the work field.  But not just to level up the equality between the sexes, but also to fill a gender specific niche to counter up a need for male role models. But a closer look at this need and the types of functions set to cater for it shows that male role models as a concept vary between contexts. In this study we examine the concepts and the practices of male role models in three different settings: a municipal social care center offering young boys male bonding activities; a non-profit organization warding young people from drug abuse and criminal behavior; and last, a long term residential home for young boys between the ages 13 and 19. Our research shows that the concept of the male role model vary between the organizations and less so within.

The purpose of this study is to survey and evaluate if the individual contrast sensitivity and preferences for horizontal and vertical lighting level correspond to the values that standard SS-EN 12464-1 recommends for the workplace- and surrounding light levels.This study examines if lighting should be adapted after the individuals? need or if a general value can be found that will cover every individuals? need for a workplace and surrounding light level. This study also examines if parameters like sex, age and/or glasses/lenses have an effect on the amount of lighting that the test subjects need. Lastly we compared the values concerning the relationship between workplace- and surrounding light levels with standard SS-EN 12464-1?s recommendations.The study is carried out with an experimental design that surveys 220 test subjects who were chosen by a selection of convenience.

This study is made in cooperation with Setragroup AB. Setra is Sweden?s biggest sawmilling company with a turnover of almost 6 billion SEK. 45% of the produced volume goes to the Swedish market where the customers are the DIY-sector and industrial customers. Setra as well as the other Swedish sawmilling companies operate in a very competitive environment.

ABSTRACT Poverty, and in particular child poverty, is a serious social problem. Statistics show that the number of children living in poverty has increased over the last ten years. Earlier research shows that there are huge gaps in our knowledge of how the actors in civil society handle child poverty. With this study we hope to help fill this gap. The aim of our study is to look at how four different organisations working in the civil society in Uppsala perceive and handle child poverty.

Abstract Svanvik, Robin (2013). Läs: spela! En jämförande studie av elevers uppfattningar om datorspel, skönlitteratur och lärande. Svanvik, Robin (2013). It Reads: Play! A comparative study of students' beliefs about computer games, fiction reading and learning. This essay is part of a masters degree of pedagogy and investigates the experiences of 10 high-school students concerning playing computer-games-off-the-shelf (COTS) on the one hand, and reading fictional, printed novels on the other. The aim of this study was to learn more about the students' thoughts about playing COTS and reading novels; also, what differences and similarities there might be between these activities. Furthermore, I wanted to know what they thought they might learn from these activities. The theoretical point of departure for the study is twofold: Firstly, a theory of learning as expressed by Illeris (2007) and, secondly, a sociocultural perspective on learning, represented by Säljö (2000, 2005/2010) which includes the educational benifit of both playing COTS, represented by Gee (2007), and reading fiction, represented by Probst (1990) and Langer (1995). The method used in this study is mainly qualitative by nature.

Single vehicle accidents are one of the most common types of accidents that occur on the Swedish road network. Depending on the design of the road, the presence of a crash barrier and embankment on the roadside, the outcome of a roadside collision can lead to serious injuries and even deaths.The aim of this project is to investigate the possibility of improving road safety by designing the optimal roadside area based on the results of a life cycle cost analysis (LCC).The questions that have been answered during the duration of this project are:1) Describe the current technical solutions for roadside area design and the various barrier types used in Sweden.2) Complete an existing mathematical model that has been developed by Hawzheen Karim, for calculating life-cycle costs for various roadside areas.3) Calculate and compare the life cycle costs for the side area with a barrier and without a barrier.By performing an analysis of the documentation on the current guidelines and rules for shaping the roadside, was it possible to describe the current technical solutions for the formation the roadside as well as the current roadside barriers in use today. A mathematical model for calculating the life cycle costs of different barrier types had already been developed by Hawzheen Karim. This model was supplemented so that it could calculate life-cycle costs of the roadside region with and without a barrier. After the model was completed, an analysis was performed to obtain life-cycle costs of a roadside with and without a barrier.The result showed that there is a clear relationship between the slope inclination, fill height, and the rate at which the costs rise.

Problem formulation: Recent results from the European Food Information Council?s consumer research on nutrition information and food labelling revealed that most consumers have little understanding of the nutrition information found on food products, feel that there is little authority regulating these matters and wish for a more trusted source of information and regulation and lastly it was found that consumers accept their limitations and have little motivation to even read or learn about nutrition information. Thus what are the reactions of the various legal authorities to this problem? How are food retailers and producers responding to the needs of the consumer? How are consumers then reacting to these two players in the industry and the changes they are making?Purpose: The purpose of this research is to gain new perspective and a better understanding of relationship between consumers, companies and legal instruments in relation to nutrition and health claim labelling of food products. Method: The nature of this multi-disciplinary research has led to the study of all three areas, business administration (containing consumer behaviour) and business law, which are contained in this paper.

The purpose of this study is to generate knowledge about how teachers relate to students with language impairment in learning situations, with particular focus on working memory. The questions are: What kind of knowledge do teachers have regarding language impairment and working memory?, What experience do teachers have regarding lack of working memory abilities among students with language impairment and which consequences do the teachers believe such defects may have for the students? and How can teachers create a learning environment that reduces the working memory demand for students with language impairment? A review of the field shows that there are gaps to fill regarding students with language impairment and working memory. Language impairment has so far been neglected by researchers and within the public debate. How working memory capacity affects the students has only recently begun to receive attention in school and research.

In this composition, a study of consignment inventory on basis of the factors which are important for implementation and application of consignment inventory are made. Logistics chain from subcontractor to end customer is becoming more complex when the volume of items constantly increases to satisfy the needs of the market. From that perspective, companies had large inventories but today it is a lot of different solutions to streamline inventory management. One way that recently becomes increasingly common is to let the subcontractor fill up the customers stock using different approaches such as VMI (Vendor Managed Inventory). A further step in the evolution can be to make use of consignment inventory where the vendor owns the stock of the customer.