Reflections är en stämningslampa som med hjälp av invävd fiberoptik lockar fram nya visuella och taktila uttrycksvärdeni en textil. Under arbetets gång har jag utforskat mängden ljus som fiberoptisk textil sprider längsmed fiberlängden samt undersökt naturfiberns egenskaper när den vävs samman med fiberoptik.En stor utmaning var att hitta balans mellan tekniska begränsningar och det uttryck jag sökte. Lampans formspråkär min reflektion över dagens stadslandskap där arkitekturens geometriska former möterfordons strömlinjeform. Med stämningslampan hoppas jag att hitta och inspirera till nya användningsområdenför fiberoptisk textil.Reflections is a mood light using interwoven Fiber optics witch brings out new visual and tactile expressionvalues in a textile. During the work, I have explored the amount of light Fiber optic textile spreads along thefiber length and examined properties of nature fiber when it is interwoven with Fiber optics.A major challenge was finding a balance between technical constraints and expressions I was looking for.

Tree fiber lengths controls properties like strength and smoothness in paper and other wood products. For forest researchers it is of interest to be able to determine the fiber lengths in standing trees. Mo?rling et al. (2003), among others, have developed methods to estimate fiber length distributions in standing trees without damaging them.

Tree fiber lengths controls properties like strength and smoothness in paper and other wood products. For forest researchers it is of interest to be able to determine the fiber lengths in standing trees. Mo?rling et al. (2003), among others, have developed methods to estimate fiber length distributions in standing trees without damaging them.

Tree fiber lengths controls properties like strength and smoothness in paper and other wood products. For forest researchers it is of interest to be able to determine the fiber lengths in standing trees. Mo?rling et al. (2003), among others, have developed methods to estimate fiber length distributions in standing trees without damaging them.

Glulam is a product that was engineered to make use of timber in a more efficient way. Bychoosing timber of similar quality and discarding natural defects during production, thedevelopment of a stronger cross-section is achieved.Carbon fiber is a relatively new material with a high tension capacity. This feature is used toexamine how the bending capacity of the beams improve by adhering carbon fiber laminateson the lower edge of the beamsThe strength of the material is tested with three experiments: carbon fiber on the bottom of thebeam (a), carbon fiber attached to the lower sides of the beam (b) and carbon fiber in thebeam, covered with a layer of wood (c)The results show that the first case, where the carbon fiber is attached to the bottom of thebeam, gave the best result with an increase in capacity of 59 % compared to the nonreinforcedcontrol. The other two cases also show an improvement in capacity, beam-type 3had a capacity increase of 47% and beam-type 4 increased with 25 %Tests were also made with glulam beams reinforced with fiberglass, but these tests were notanalyzed in depth because the purpose was to compare the capacity to carbon fiber. Thisbeam improved its capacity by 40.3%.The tests show that carbon fiber as a reinforcement material for glulam is a good choice whenthere is a requirement for stronger cross-sections in both new production and renovation ofold buildings.

Leber´s hereditary optic neuropathy (LHON), a disease affecting vision, is caused by several point mutations in mitochondrial DNA. Mutations leading to a defect NADH ubiquinone oxidoreductase protein will affect the respiratory chain and cause a disturbed ATP production. It is still unknown why this defect leads to the degeneration of retinal ganglion cells and cells in the opticus nerve as well as demyelination of axons in these areas. Analysis of mitochondrial DNA is an important tool in the diagnosis of the disease. At the present time analysis is based on cleavage by restriction enzymes, which only detects two of the most frequent mutations: m.3460G>A and m.11778G>A.

The objective of this study was to examine how an IT department has been affected by the changes of increased local usage of IT, and how the usage have affected municipalities IT departments demands of IT support. In the study we explore how both the IT department and the IT support works by interviewing present and former employees at the local IT department. The current IT department have undergone a series of local changes over the last 20 years, the department has gone from only having internal users to getting the entire municipalitiy?s agencies of IT as users. It started with how the municipality began to dig down Fiber optic cable in the middle of the 1990?s, and today has started to develop solutions as to how to meet the demands of future usage of IT.

AbstractToday there is an opportunity to reinforce concrete with steel fiber reinforcement. In some cases, completely replace the conventional reinforcement. Replacing conventional mesh reinforcement with steel fiber reinforcement in slabs on ground has shown economic benefits, less crack width and less reinforcement amount.Today there are no Swedish standard for designing steel fiber reinforced concrete, what is there is different international recommendations.In this work, design methods for steel fiber concrete are used according to RILEM and Bekaer Swedish AB's software DRAPRO. For other design methods Eurokod 2 is followed.In this work, the design of slabs on ground that are not exposed by large tension strength been designed. Design of crack-reinforcement and restrictions of crack width have been conducted in three different slabs on ground.The calculations have been performed using only conventional reinforcement and only steel fiber reinforcement, and the results are then compared.The results of the theoretical analysis are summarized in tables that compare the amount of reinforcement, crack width and economic cost.This work showed that the slabs on the ground reinforced with steel fibers provide less crack width with a minor amount of reinforcement.

This thesis aims to investigate SAAB AB´s possibilities to use synthetic instruments in their test systems. The reason for this is reducing costs and the risk of obsolescence which is common when test systems operate for several decades.The market around synthetic instruments has been explored in the search for suitable hardware and software. Software has been developed in LabVIEW and synthetic instruments have been created with the help of IVI-drivers. The hardware consisted of PXI-instruments (Waveform generator and Digitizer), connected to a computer using a Fiber optic link and PXI-chassi. The created instruments was then compared to common instruments used today, and the comparison turned out well.

The high feeding value of red clover makes it into an important species in Swedish agriculture. There are three different maturity types grown in Sweden, early, medium late and late. The time for heading, regrowth and winter hardiness is affected by the maturity type, but there can also be other factors that are affected by the maturity type, for instance fiber content. In a greenhouse experiment three red clover varieties of different maturity types were compared; early Titus, middle late SW Nancy and late SW Torun. The features compared were fiber content and differences in development rates.

The purpose of this study is to investigate whether Karlstad City Fiber Network visual elements in the form of a pair of speech bubbles fit into the organization's holistic external communication and branding. The study examines whether Karlstad City Fiber Network image of the organization and the speech bubbles match the stakeholders view and how the visual elements are perceived and recognized by stakeholders. The theory associated with the study is theories of corporate visual identity, image, identity and branding and visual communication. These three elements are important to be aware of when a generation of an effective external communications. Qualitative interviews with employees at Karlstad City Fiber Network and Karlstad municipality has undertaken to give an idea of ??what the organization wants to achieve and what their opinions are.

The purpose of this study was to investigate whether resistant maltodextrin is suitable as a fiber source in the probiotic fruit drink ProViva Mango without affecting the probiotic bacterium Lactobacillus plantarum 299v, viscosity or the sensory experience of the drink. Resistant maltodextrin is produced from hydrolyzed corn starch and is classified as a soluble dietary fiber. It is relatively resistant to digestion in the small intestine, where approximately 10% can be broken down, 50% can be fermented in the colon by the intestinal flora and 40 % is excreted in the faeces. Resistant maltodextrin has several important qualities when it comes to food processing. When added in a product, it does not affect the viscosity or taste and it is heat and acid stable.

The aim of this master thesis is to study the integration in Sweden between forestry and bulky industries as fiber- and sawmilling companies. The analysis is based on theories about transaction cost economies and competitive strategy. The studied companies are active on the Swedish roundwood market. The buying actors on this market were divided into two groups; fiber- and sawmill industries. Three companies from each group were chosen subjectively by the author.

Studien undersöker om huruvida Lindberg och Graléns tvistmetod är möjlig att vidareutveckla och tillämpa vid mätning av friktionskraft fiber mot fiber med en dragprovare. Extrautrustning har konstruerats och monteras i anslutning till dragprovarens klämmor, då uppnås önskad geometri för tvistmetoden. Friktions- koefficienten beräknas med avstamp från en given formel. Material som undersöks är Polyamid 6.6 (PA 6.6) samt Polytetrafluoreten (PTFE). Testmetoden har optimerats genom försök där tvistantal, pålagd last och fiber- diameter har varierats vid ett konstant avstånd mellan dragprovarens klämmor.

Den tekniska utvecklingen går fort framåt och tillgång till en fungerande och snabb internetuppkoppling blir allt viktigare. Inom de närmaste åren kommer en stor del av Sveriges befolkning och företag att få tillgång till snabbt bredband via fiber. I vissa delar av landet finns inte tillräckligt stort kundunderlag för att det ska vara lönsamt för operatörerna på marknaden att ta initiativ till utbyggnaden. I dessa områden är det upp till fastighetsägarna själva att gå samman och att på egen hand se till att fiberutbyggnaden blir av. Fastighetsägarna kan i dessa fall välja att organisera sig i en gemensamhetsanläggning.Syftet med detta examensarbete är att undersöka om bredband via fiber kan vara av väsentlig betydelse för en fastighet.