This report treats two assignments that concerns the biofuel furnace at Billerud Skärblacka AB and how these assignments were solved. The assignments were: reducing the number of CO-spikes and tuning the overfire air control loop. To reduce the number of CO-spikes the possibility that skewness in mass distribution affects the number of CO-spikes were study. The skewnwss of mass distribution was controled and adjusted with two experiments. The conclusion that was made is that the skewness of mass distribution were not sufficient enough to affect the number of CO-spikes.

Automatic milking systems (AMS) are part of a growing trend in Sweden and the number of milk-producing farms is decreasing rapidly. One main reason for the AMS is its ability to facilitate work for the farmer. The effects of introduction prior to calving have not been documented earlier and farmers are not in agreement, however they seldom see a problem with the introduction. The aim of this report is to find differences between two groups of heifers, where one group is trained i.e. introduced to the AMS before calving and the other group is introduced after calving.

Baled silage has become one of the most important conservation methods in Sweden. Because we take our grass as silage we get the quality and the good hygenic that we would like to have. Silage has become a big buisiness also in the horse feeding where many of the breeders have changed from the hay to the hay-silage. The difference between regular silage and haysilage is that the hay silage is dryer (60-70%DM). The hay-silage has also put higher demands on machinery and wrapping material since the grass gets sharper and harder to press together real hard. The main reason for the test was to compare two different systems for wrapping, the new Cross Pac and conventional.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

The aim of this literature review was to discern which legislations and regulations related to animal welfare that comprises reindeer and their significance in reindeer husbandry. The Swedish Animal Welfare Act (1988:534) was enacted July 1, 1988 and its main purpose is to ensure a good animal health and environment. Animals that live in a good environment with good health is considered to have good welfare, which can be described as an individual's condition in relation to its surroundings. Reindeer herding is an extensive form without daily management. In reindeer husbandry there are eight specific seasons over the year and reindeer are handled as they migrates between pastures, get earmarks, are sorted for transport and slaughter.

The wastewater treatment plant at GE Healthcare's facility in Uppsala deployed a three step vacuum evaporator in 2007. The purpose of this was to pre-treat wastewater containing amines. The purpose of this thesis was to optimize thisprocess by reducing the amount of concentrate without releasing more nitrogen tothe environment and to examine if density could be used as a measurement of whenthe process should be ended.To create a foundation for optimization six test cycles were conducted with samples taken from all three steps. Both concentrate and condensate were tested as well as the incoming solution. Furthermore, the thesis has been expanded with a benchmarking part examining two different evaporators.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

KRAV-certified organic dairy herds generally have a lower milk yield than conventional dairy herds. A high-level of milk yield requires a feeding regime with high amounts of concentrates, a factor known to contribute to the development of claw lesions (Bergsten, C. 2003). The aim of this study was to compare claw health between organic and conventional dairy herds in free and tie stall systems. The number of herds from different domestic animal health associations was chosen in proportion to the association´s total portion of Swedish dairy producing herds of each type, respectively.

The Sand Catcher                                                       The thesis project The Sand Catcher investigates the encounter between permanent structures and an ever-changing landscape. The migrating sand dune Råbjerg Mile in northern Denmark is 40 meters high and moves more than 15 meters every year. By introducing a solid structure on the site, the fast movement of the sand dune is emphasised and thereby our view of time and space.Through intuitively building models with varied openings and densities I investigated how architectural elements react with sand. From these experiments a series of spatial features and effects were found, generated from the meeting with the sand.The Sand Catcher is a solid and permanent structure. The sand is the liquid element that generates new spaces, circulations and experiences.

This thesis examines different methods for the cooling of data centers. Several means of cooling with the refrigeration cycle have been studied, as well as the feasibility of using free cooling in different parts of Sweden. In addition, the possibilities of transferring excess heat to a nearby district heating system were investigated. It was found that in all investigated cases except two, the data center could be cooled solely with free cooling for at least 300 days a year when only the outside air temperature was considered as a constraining factor. The limit was then set to 20 °C.The vast majority of all district heating systems in Sweden get little to none of their heat from other excess heat sources.

Sitka spruce (Picea sitchensis) is not considered to be a native species to Swedish forests. It´s origin is the pacific coast of Northern America, an area that is dominated by a coastal climate which makes it likely to believe that it would be well suited for growing in the south-west of Sweden. This study aims to investigate the gain in production that can be reached by growing sitka spruce instead of Norway spruce (Picea abies) in the county of Halland. A regression model based on data from forest experiments was produced to explain the gain in production. This model was based on elevation and annual precipitation. The model was then used to create a map layer in arcGIS that shows the gain of volume in comparison to Norway spruce in percent. An analysis was carried out to find what share of the forestland in Halland county that fell into four different classes of production gain.

The aim of this study is to examine the understanding, preschool teachers, have about their work related to energy conversion in the human body. Through individual interviews, answers have been sought to the following questions: What do the preschool teachers believe they need to know about the link between food and energy? What are the different methods preschool teachers use to workwith the area of energy conversion in the human body?The results show that preschool teachers have knowledge in terms of food and its nutrients as an energy source for the body to cope with. However the more thorough and detailed questions become all the more uncertainty there is about the topic. Preschool teachers on their own initiative do bring up the topic with the children and begin conversations as well as ask questions, perform experiments and demonstrations.