The mistakes and failures on the roof are noticed during inspection of the construction, many of the commentaries are recurring. A contractor should only need to get a commentary once and then learn from the mistake. It has in this study been brought to light that the solution is not to tell the contractors to "stop slattern", it is more complicated than that. Today, the biggest problems are found in leadership, communication, feedback of experience and that the entrepreneurs take too little responsibility.To minimize the amount of commentaries all contractors need to work with a clearer leadership where the leader is both respected and appreciated. The leader must in an effective way be able to convey all the information to all employees.

Traditionellt är medarbetarsamtalet till sin form ett organiserat och planerat samtal mellan chef och medarbetare, oftast i syfte att kartlägga behov, krav, verksamhetsmål och förståelse hos medarbetaren. Sedan 1980-talet har det forskats mycket om medarbetarsamtal i Sverige, oftast med utgångspunkt i medarbetarens upplevelse. Vi menar därmed att det saknas ett perspektiv, nämligen det på chefen och dennes utveckling av sitt ledarskap. Vi har därför valt att analysera medarbetarsamtalet som en förutsättning för ledarskapsutveckling. Eftersom det inte finns mycket forskning om denna omvända syn på medarbetarsamtalet, har vi valt att med ett explorativt förhållningssätt genomföra en kvalitativ intervjustudie med fem chefer som i sitt arbete utför medarbetarsamtal.

Aim: The aim of this study was to examine a way to measure students? knowledge development by using a self-made measure instrument based on William Doll?s postmodern curriculum.Question: Is it suitable to use an self-made measure instrument based on William Doll?s post-modern curriculum theory to measure development of knowledge?Methods: The study was based on process-hermeneutics and was focused on analysingcollege students? written and oral reflective thoughts. The data was collected over three lessons, where six students? written reflective thoughts were handed in. An observation was carried out each lesson for an extra control of validity.

This master thesis is one part of a project, called ?StabSim?, with the purpose to develop a simulation model for the align and stabilisation system in main battle tank 122. The origin of this project is that it should be possible to make control analysis without risking any hardware. Besides that it will be easy to change components in order to investigate the behaviour of the system. The report includes modelling of tower and weapon mechanics and also the modelling of the synchronous motors, which control these.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

We would like to gain a more in depth knowledge of whether the modern orientations both within corporate governance and control philosophy lay the foundation for enterprises? more sustainable success. These both modern orientations are increasingly focusing on the importance of enterprises? setting of goals and visions on the basis of stake holders? interests and the employees? more active engagement in and motivation for the goal achievement. Despite these common inherent characteristics, it is not evident from current scientific debate how such integration actually emerges in the control philosophies of the enterprises.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

The purpose of this study has been to investigate the views of five teachers on their own leadership, and on the way they make it work in the classroom. The method was a qualitative investigation consisting of separate interviews with five elementary school teachers from three different schools in the southern part of Stockholm. The results showed that a good pedagogic leadership, successful with the pupils, can be characterised as at the same time democratic and "situation adjustable". This includes the ability to formulate the rules of conduct clearly, to take decisions and to create a good working atmosphere in the classroom, so that the pupils can feel secure, and be able to learn and develop. That however, cannot be accomplished if the teacher only maintains a negative communication, reminding the pupils of what is forbidden.

Minimizing power consumption is a critical part of many embedded design projects. Thechallenge is to limit the power consumption of the system and at the same time providesatisfactory service to the user. With regards to microprocessors, the main way of limiting powerconsumption during program execution is to adjust the frequency and the voltage at which theprocessor operates.To enable the implementation of real-time scheduling with support for dynamic voltage andfrequency scaling, an exhaustive study of the Freescale i.MX31 embedded microprocessor isperformed. Specifically, the power consumption relationship to all relevant frequency andvoltage settings is investigated. In addition, to enable frequency and voltage scaling in a real-timeenvironment, a complete timing analysis of proposed voltage and frequency scaling methods isperformed and their suitability for use in real-time systems is evaluated.To integrate voltage and frequency scaling capability into OSE RTOS, a software module hasbeen developed for this operating system.

At a manufacturing company, due to the competition the price is reducedtowards the manufacturing cost. Therefore it is important to maintain control ofones costs and keep calculations up-to-date.This thesis deals with cost accounting at a aluminium-processing company. The report focuses on calculating machine cost per hour since the manufacturing costs are the major part of the total product cost.Managers on the company believe that the costs they use in calculations todayneither is up-to-date nor advantageous in a market aspect and due to that their calculations need to be revised. The machines cost per hour is a major part in the manufacturing calculation. The company wants to provide a competitive price that also covers their costs.

My objective for this project was to create a short but thrilling 2D-animation intended as promotion for an online comic book. The purpose of the project was to learn more about animation and graphics, to further my artistic skills and to learn how to work in Adobe After Effects. I also wanted to learn more about scheduling, project methods and how to handle stress. During the ten weeks of the project I have created the story, the storyboard, the character design, the backgrounds and the animation. The voice over was recorded with the help of a fellow student who also made the music and the sound effects.

This paper examines and analyzes effects of the introduction of a new management control system tool within a Swedish public health organization, the Södra Älvsborg hospital, and its possible effect on organizational change. The new management control system tool, known as the SÄS-model, has been widely criticized for being too costly and with too small positive effects to be shown. Our approach has with that as a background been to examine whether the implementation of the SÄS-model and its balanced scorecard has been able to result in effects regarding organizational change. We have through a case study aimed to analyze how a management control system, much alike one that is typically used within foremost private organizations, can promote organizational change. Our results suggest that the implementation of the SÄS-model and the balanced scorecard has given the organization clearer visions and goals.

The government appointed in 2004 a special investigator with the objective to investigate the possibility of introducing a new law concerning implementation of obligatory cash registers with certain certification. This resulted in SOU 2005:35 ?Krav på kassaregister - Effektivare utredning av skattebrott? (Proposition 2006/07: 105). Following advice received from the respondents, the government has drafted a bill submitted to parliament in March 2007. Government bill 2006/07: 105 proposals for new law on cash registers, and submitted to parliament 2007th Act (2007:592) on the cash register was adopted by parliament in March that year and came into force on 1 January 2010.

Denna rapport utreder huruvida feedforwardreglering av ventilationssystemet på Kiruna flygplats leder till lägre energianvändning. Rapporten jämför ett feedforwardreglerat system simulerat i Simulink med ett feedbacksystem som motsvarar det existerande systemet på Kiruna flygplats. Jämförelsen görs på fläktens energianvändning och rapporten använder sedan energianvändning för värme och kyla för att avgöra huruvida systemet är ekonomiskt gångbart. Systemet är tänkt att kunna användas i alla miljöer med kända störningar i avseende till tid och storlek som till exempel flygplatser, biosalonger, teatrar och så vidare.Rapporten ger en kort teoretisk bakgrund till hur ventilationskrav, reglerteknik, feedforwardreglering och feedbackreglering fungerar för att sedan gå vidare till att redogöra för de förutsättningar som gäller för Kiruna flygplats med avseende på klimatskalets täthet, rummens volymer och utformning och drifttiden för ventilationssystemet. Med hjälp av simuleringar i Simulink görs en jämförelse av energianvändning då de båda systemen är optimerade utan att för den sakens skull kompromissa med kvalitén på inomhusmiljön.

This report is the outcome of an exam work made in interaction design, bachelor degree, at the School of Arts and Communication, Malmö University. Working in collaboration with the childhood obesity unit, Region Skåne, our aim was to fulfill their request of a web based application preparing the children for treatment at their facility. Furthermore the application intends to give the children knowledge concerning obesity as well as teaching them how to obtain a healthier lifestyle in terms of provision and activities. The application concerns children in different ages and therefore different stages of their learning abilities. Our conclusions are that they need to be challenged and obtain feedback in different ways to get motivated.