During the last decade the conditions for the music industry have been changed significantly. With the dropping sales of physical phonograms and the increasing illegal file sharing, the record labels have been forced to adapt and thus seek alternative sources of income next to the traditional sales of phonograms. Our purpose was to investigate how smaller Swedish record labels adapt themselves to the changing environment within the music industry and which new alternative sources of income they can use to finance their music production. To do this we used a deductive approach where we started by researching theories we thought were relevant to the subject, which we then used to get valuable information out of our informants.From our empirical investigations it appears that the independent record labels are rather positive about the future and that they will be able to survive, even though they will have to change their ways of working to a large extent. Our results show that the record labels as we know then will disappear.

The purpose of the present quantitative study was to examine gender differences inperceived job satisfaction in two departments, with different work patterns, in a Swedishmanufacturing industry. The questionnaire contained 30 statements and five backgroundquestions. The questionnaire was designed in combination of Job Satisfaction Survey (JSS),Work demands, Social support, Control and Competence (ASK), Questionnaire forPsychological and Social factors at Work (QPS Nordic) and Minnesota SatisfactionQuestionnaire (MSQ). Job satisfaction was measured based on the categories influence atwork, leadership, employee influence, work requirements and the physical environment. Theresults of the present study showed an interaction of gender and department where the femaleindustrial workers, who worked with more monotonous and standardized work tasks, valuedall of the categories of job satisfaction the lowest, except for the category employee impact.The results are believed to depend on that the women in the department had greater demandsfor variety in the work..

The number of firms adapting the concept of Corporate Social Responsibility is constantly growing. It is no longer enough only to supply your customers with demanded products and services since todays? customers have an increased awareness and are demanding more transparence when it comes to the manufacturing and responsibility for society.Along with a growing interest in social, ethical and environmental matters, many firms have received critique, consequently forcing them to start taking more responsibility for their activities. The clothing industry was among the first to get critized and therefore early in starting their work with CSR.The purpose of this paper is to investigate how firms in the clothing industry work with CSR today, and also how they choose to communicate this work, both internally and externally. The methodology of the paper is qualitative and aims to deeply investigate four different firms, along with an additional interview with a CSR-consult from one of the leading communication-firms in Sweden.The theoretical foundation includes a frame of reference around CSR and the communication thereof, and also a few relevant theories around CSR and business ethics.After analyzing the empirical material the paper have reached a few conclusions.

Work, especially that in complex, dynamic workplaces, often requires subtle, local judgment with regard to timing of subtasks, relevance, importance, prioritization and so forth. Still, people in Nuclear Industry seem to think safety results from people just following procedures. In the wake of failure it can be tempting to introduce new procedures and an even stricter "rule following culture". None, or at least very little, attention is given to tacit knowledge and individual skills. I am aiming to highlight the inadequacy of putting too much trust in formalization and that reporting and trending of events will contribute to increased learning, an increased nuclear safety and an efficient operational experience.

In my project I have collaborated with Linda Larson, who is the creator behind the fashion brand Elveel. The goal was to produce an identity and a graphic profile for Elveel. The aim was that the graphic profile would act as an extension of the clothes aesthetics. I wanted to explore if I by different folding and cutting techniques, in tags and packaging, could reflect the details of the clothes expression. But also how different design elements can reflect the story behind the clothes.

Arbetets bakgrund är en studie av hur produktutvecklings- och produktionsstegen ser ut i teorin för klädföretag som produktutvecklar genom ?snabbt marknadsbesvarande genom korta ledtider? och producerar genom det ?progressiva buntsystemet?. Jag presenterar de olika processerna och vilka svårigheter de bär med sig. I arbetets metoddel är samma processer studerade i praktiken hos intermediära företag och fabriker i Kina och tre nordiska ?fast-fashion?-företag.

Bachelor thesis, Trolley Innovation Project, has been unique in the sense that it has been carried out over the borders of Sweden. Iacobucci S.p.A, located outside of Rome in Italy is one of the largest manufacturers of interior equipment for aircraft in the world. With approximately 30% of the market Iacobucci S.p.A is one of the world's largest manufacturers of catering trolleys.The aim has been to produce a new competitive catering trolley for the airline industry. With customers and users in focus, the project team found that weight, ease of use, ergonomics and design were important aspects. Having a low weight of all the interior is particularly important when there is lots of money for the airlines to save in reduced fuel costs.

Background: It has been shown that EDI can yield positive effects within companies. Which effects are possible for a company to direct assign to the introduction of EDI and is it possible to estimate the total effect.Purpose: The purpose of this study is to estimate and analyze the effects of using EDI in electronic business. We also want to contribute with a model for measure and estimate the effects of EDI.Accomplishment: We have studied literature concering EDI and realized a preliminary studie in form of interviews with experts to establish deeper knowledge of EDI. We have also tried to estimate the effects obtained in companies in three different businesses, power, government and transport industry.Result: To obtain as good effects as possible it is important that the co- oporation is built on trust and engagement. Before implementing the EDI-system a thorough overhaul of the processes in the company should be done, involving both the top managers and the staff.

A lot of mine waste rock and tailings arise from all mining processes and have to be stored in an appropriate way. Tailings are deposited in impoundments retained by tailings dams. The objective of tailings dams is to retain the slurry from the mining process and in that way prevent spill into the surroundings that might be harmful for the environment. Tailings dams are often constructed as staged embankments so that construction costs and demand of materials are spread more evenly over the period of deposition.The objective of this thesis has been to compile information about and evaluate events at Swedish tailings dams and also to develop a collective database for all Swedish mining companies for all tailings dams and all events that occur at tailings dams.Information about 60 events at Swedish tailings dams has been gathered and evaluated. The evaluation has been performed by comparison between and analysis of individual parameters and also by use of a multivariate statistical method called PLS.

This study aims to investigate how small scale manufacturing companies reason around an implementation of a PLM-system, as well as the suitability of these systems compared to larger companies. The study is built on a qualitative method. Initially, secondary data was gathered through books, articles and reports. Primary data was gathered through four interviews. Two interviews were performed with PLM resellers, one interview was performed with a PLM developer, and one interview was performed with a small scale manufacturing company that opted to not implement a PLM-system.The results imply that overall differences between larger and smaller companies exist in regard to the need of PLM systems.

I uppsatsen utreds indirekta förebilders påverkan på svenska förtonåringars modeval av kläder och skor. Mycket av den forskning som gjorts tidigare berör andra marknader än den svenska och andra produkter än kläder varför vi anser vårt valda område tämligen outforskat. Vi redogör i uppsatsen för teorier som behandlar modespridning, barnens roll som konsumenter, kommunikation, varumärken, referensgrupper, self-concept, symbolisk konsumtion och familjens beslutsroller. Resultatet från de kvalitativa intervjuer som vi genomfört med pojkar och flickor i åldern tio till tolv år redovisas. Slutsatserna är att förtonåringarna har ett uttalat idolskap från i första hand sportvärlden och i andra hand musikbranschen.

During our formative years, technology has always had a natural part of everyday life, and for us technology has never been particularly gendered. If this depends on the climate and the attitude of our homes, ourselves, the combination of both or something completely different is a question we have asked ourselves at times. But our approach to technology does not seem as obvious to all women, and today the IT industry is heavily dominated by men. This has meant that we have asked the question whether there is any underlying reason why so few women opt for IT courses? Is there a link between how different IT organizations profiles and the prevailing gender ratio? The purpose of this study is to investigate whether there is any connections between how IT organizations are related to gender issues and how the structures, attitudes and gender actually looks like in the IT industry today, and how this can be seen in their branding efforts.

Study objects: JM, Folkhem and ABB.Purpose: The purpose with this study are to examine how the supplier relations are in the construction branch and compare that result with how the supplier relations are for ABB a production company.Theoretical: The theoretical chapter illustrates important and relevant parts of supplier relations, purchasing and supplier strategies to give good overview. The theoretical review will combine information from different fields to consent with the research problem.Method: A case study has been made on three different companies, one of the companies was active in the production industry the other two were active in the construction industry. Data was mainly collected through semi structured interviews on each of the three companies.Conclusions: The size of the company decided which point of view the company had on purchasing, traditional or modern view. All three companies had a centralized purchasing organization but the construction firms were more decentralized than the production company. The reason was that the construction firms were dependent with more flexibility when every construction project is unique..

The conflict in Vaxholm was an important event since it influenced the view upon the Swedish labour market. The entire Swedish model was questioned and questions about what the concept of solidarity stands for and for whom it is meant arose.The Swedish union, Byggnads, was harshly criticised for having acted in a discriminating fashion towards den Latvian workers and the Latvian company Laval un Partneri. The debate in the media was intense.My intention with this essay was to scrutinise the arguments in one of the most prestigious newspapers in Sweden, Dagens Nyheter, and to put the argumentation into a perspective of solidarity. I wanted to investigate how the different parties argued about solidarity. One of the conclusions I drew was that Byggnads needs to question their definition of solidarity and how they wish to express that in a new world more influenced by globalisation and immigrated labours..

Research question: How does the industrial company Scania work to get more women in leadership positions?Purpose: The purpose of this work is to describe how companies in a male-dominated industry can work to get a higher share of female leaders.Method: This survey was based on a deductive approach with a qualitative method. Theories have been obtained primarily from scientific articles and the empirical part has been collected through interviews from the companies Wiminvest and Scania.Conclusion: The conclusions the study came up with was different elements that companies in male-dominated industries can work with to get a higher share of female leaders. The first thing that companies can do is to join the project BON or similar projects to work on this issue. They can work with workshops and lectures to disseminate knowledge about the topic.