Family centres are established to serve families with children and the personnel usually consists of units of social-workers, preschool staff, paediatric nurses and midwives. The purpose of the study was to examine the social-workers preventive work with families at the family centre. To fulfil the purpose, a qualitative interview with five social-workers was conducted. The theoretical framework referred to attachment and empowerment theory. The results of the study showed that the main part of the work consists of giving advice and support to parents.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

Since the mid 60?s, Germany has seen dropping fertility rates and yet next to nothinghas been done to combat this trend until the current regime led by Angela Merkel andher minister of family affairs, Ursula von der Leyen initiated a number ofcomprehensive reforms of Germany?s family policies.Family policy in Germany is being reformed in three ways. First of all parents arenow eligible to receive substantial financial support in order to compensate the loss ofincome associated with a pregnancy and or parental leave. Second, the all but nonexistentpublic child care services are being vastly expanded with the goal of beingable to offer child care service for every child age 0-3. Thirdly the tradition of schoolsending classes midday is being reformed with the aim of letting kids stay in schoolmuch longer thus enabling parents to work full-time as opposed to part-time in orderto be able to take care of kids returning from school.The hopes for these ambitious reforms are tremendous.

The main purpose of this study is to examine what the factor or factors are to why young exposed Kurdish women stay with their family despite honor-related oppression and violence.We have used a qualitative study process consisting interviews with eight young Kurdish women. We have also applied theories such as cultural patterns and aspects of power by Mona Eliasson and normalization process by Eva LundgrenWith the material from our research we can see that the main and only factor to why the respondents decide to stay with their family is fear of getting killed or beaten.This study will provide you as a reader a better understanding of why young exposed Kurdish women decide to stay with their family..

This thesis has been conducted at Saab Bofors Dynamics AB. The purpose was to investigate if a non-linear missile model could be stabilized when the optimal control signal is computed considering constraints on the control input. This is particularly interesting because the missile is controlled with rudders that have physical bounds. This strategy is called Model Predictive Control. Simulations are conducted to compare this strategy with others; firstly simulations with step responses and secondly simulations when the missile is supposed to hit a moving target.

The environmental debate is more intensive than ever before and the demands on companies increase. There are a number of methods to make it easier for the companies to fulfil the demands. Life Cycle Assessment (LCA) end ecodesign are some of the methods that can be used. Syntronic AB has the possibility to reduce the products´ environmental impact in the design phase. Therefore it is important for the company to make it possible to visualize the negative environmental impacts a product can cause in an easy way. It is also important to visualize for there clients if any improvement is possible. The purpose of this thesis is to develop a simplified model.

Latent heat storage is a way to store thermal energy when a phase change material undergoes a phase change. The advantage of latent heat storage is the capability to store more energy per mass unit than other heat storage methods. The most commonly used phase change in latent heat storage is the transition between solid and liquid. Phase change materials can be divided into organics, inorganics and eutectics.In the Nordic electricity market the price of electricity is set every hour by Nordpool spot, which leads to price fluctuations because of changes in demand. The main goal of this report is to create a latent heat storage system in a single-family home and investigate the possibility to save money by charging the latent heat storage system when the price of electricity is low, and discharge when the price is high.The thermodynamic model consisted of a ?tube-in-tube? heat exchanger with phase change material in the outer tube and water as the heat transfer fluid in the inner tube.

This thesis intends to analyse conditions for a successful implementation of consociational democracy, as a democratic model in Afghanistan. The lack of critical reviews regarding the democratisation-process in Afghanistan initiated the purpose of this study.Lijpharts democracy model was used as the basis in the comparative study. Along with empirical evidence regarding how the complex process of democracy in Afghanistan is progressing, the study investigated whether the identified conditions occurred or not.The choice of which democracy model to use can be crucial for the democratic possibilities to even survive and become established in conflict-affected communities. The principle of consociational democracy is that it is an empirically based normative model that aims to organise the state in a way that works against the risks of majority domination and oppression against the minority.The empirical case study revealed that a majority of the conditions were not met, which then can counteract the possibilities for consociational democracy in Afghanistan. The study has critically examined the prospects for the success of consociational democracy in Afghanistan, and it can be assessed that there is a limited probability for a successful applying of this model..

Background: Atopic eczema has increased in the last decade among children. The nurse can have a major role to prevent the disease. Aim: the aim of this study as to describe the nurses´ work in primary care with prevention to families with atopi with focus on atopic eczema among children. Method: A literature review based on analysis of fifteen scientific articles was done. Results: If the child was breastfed both positive and negative effects were evident.

From 1710 to 1713 the plague raged through the Swedish province of Scania. Other studies have been made on how the disease affected the society during the epidemic. This study tries to focus on the recovery afterwards. How did the population and the farmsteads recover after the plague? Statistics from parish registers and cameral records show interesting patterns in the demography, and that the recovery was far from complete 1720.

This essay is a qualitative study whose aim is to see how to find a good balance between family life and managership. The result could give concrete proposals on how help can be designed to prospective female managers. The study is based on interviews with eight female managers. The interviews have been inspired by the narrative approach with the focus on how these women have tried to find a balance between management and family life and which obstacles they faced and the support they have had. The results of the study has shown that the support that the woman has been given by their spouse / partner has been one of the best and most important support for her to full fill her mission as being a manager as well as a mother.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.