The use of vision applications are growing and the demand for integration and connectivity with other industrial automation control devices is increasing. Some businesses that are using vision technology follow US Food and Drugs Administration (FDA) regulation concerning audit trail. This thesis investigates the possibility to use vision technology for counting objects, achieving connectivity and to follow FDAs audit trail regulation. A market survey has been used to select suitable hardware and software to be used in the design of an application that is able to count objects and that uses standard industrial network connection i.e. OPC data access and Microsoft?s .NET components over Ethernet.

The objective of this study was to determine the mineral content in ten New Zealand monofloral honeys, in order to distinguish whether New Zealand monofloral honeys are a good source of minerals compared to honeys from other parts of the world. The ten monofloral honeys were collected from a local honey Factory (Airborne Honey Ltd, Leeston), Clover, Honeydew, Kamahi, Manuka, Nodding Thistle, Rata, Rewarewa, Tawari, Thyme and Vipers Bugloss honeys were been investigated. The water content, water activity, pH, conductivity, colour and mineral content were evaluated. The water activity was averaged for all the ten New Zealand monofloral honeys and set to 0.59 aw, which indicates a high stability and long shelf life as a food stuff. A strong correlation between total mineral content, pH, conductivity and colour was obtained.

SAPA´s resource of waste heat is the basis for this thesis to investigate the possibility of energy assets in their cooling water and possible uses for it. The energy in the waste water is greater than the current need which has three uses which are (1) heating the Factory, (2) converting liquid propane to propane gas and (3) local domestic heating. The average energy load that is available is 1, 7 MW and the average temperature in the cooling water is 41°C. The total energy load at dimensioning out side temperature is approximately 1,6 MW for the three current uses. The temperature is currently too low to be used directly in the existing systems so an upgrade is needed.

The main argument of the thesis is that multinational companies (MNCs) can promote democracy through corporate social responsibility (CSR). MNCs hold some prerequisites giving them the means to create positive changes. But they lack one important prerequisite: knowledge about local conditions. Therefore the best CSR result is reached through partnerships with local NGOs.H&M's CSR-work in Bangladesh, including a partnership with the Bangladeshi women's rights organisation Karmojibi Nari, serves as an illustrating case. It is argued that the CSR-work promotes democracy through strengthening the civil society, through indirectly implementing national laws concerning labour legislation and human rights and through raising awareness about rights and legislation among the workers.The CSR process changes the terms for both NGOs and MNCs.

AbstractThis study deals with the tours carried out in the manufacturing sector, at Alfa Laval in Eskilstuna. A large number of visitors, from a variety of backgrounds, go there to see how the manufacturing of separators works. With visitors I refer to the company?s customers, suppliers, students, in- house trainee courses, managers and senior citizens groups.The study examines how these tours can be standardized using spatial design. The result shows the importance of working systematically with visualizing the work as well as the environment for optimizing the visitor's understanding.

This paper is about the new methods and metrics used in industry and business today striving for better revenues and larger market shares. It investigates the relations between the old fordistic and tayloristic way of manufacturing and compares it to the models used in industry today for being competitive, seeking to please customers and becoming more flexible. More specific the paper is about if Six Sigma and lean production are the key for succeeding these days. SKF:s Factory in Gothenburg and other companies will make an example for how these methods are used in practice.The aim is to try to answer if these systems with inherited tools and methods are the right way to get the flexibility that is needed for being able to deliver the right goods to customers and market. For a company to be flexible decisions must be made fast and needed changes must be able to be done easy and without too large costs and investments.

The hypothesis of this study is that the local government act in Sweden 1862 was an instrument for the state to keep its´ political influence on the local level. It did not open for local self-government. The swedish historians Dahlkvist and Strandberg description of the Swedish local government act support this hypothesis, as does the analysis of political scientists Pettersson and Söderlind. The general opinion that the local government act opened for local self-government does still exist among many swedish historians.This study had two aims. The first was to investigate the actual extent of self-government in Borgvik, a small municipality in Sweden during the period 1861-1924.

The aim with this report was to exam and surveys the internal logistics of Proton Finishing?s production. The basic data should give the company suggestions of more efficient and improved internal logistics. We will also give from our perspective suggestions of improvement, which the company will be able to evaluate.To evaluate these problems we used different kinds of methods. A frequency study was made on the internal forklift.

I examensarbetet ?Landskapsurbanism i en Post-Industriell kontext? diskuteras den relativt nya diskursen kring ?Landscape Urbanism? eller ?landskapsurbanism?. Arbetet fokuserar på platser som har övergivits av industrin, i skenet av den post-industriella utvecklingen. Huvudmålet med studierna av ämnet är att belysa ett antal ?landskapsurbanistiska metoder? och sedan tillämpa dessa på min plats: den gamla Cementafabriken på Övägen i Limhamn, Malmö.Den största inspirationskällan i detta är den amerikanske landskapsarkitekten James Corner´s teorier, och de metoder som utövas av hans landskapsarkitekturbyrå; ?Field Operations? i New York.Eftersom ämnet täcker in väldigt många aspekter och problemställningar rörande samtida urban planering och design, har jag i enlighet med Corner delat in min text under fyra rubriker:- Processes over time- The Staging of surfaces- The Operational or Working method- The ImaginaryDet gamla cementfabriksområdet har förvärvats av byggbolaget NCC, och kommer inom en snar framtid att bebyggas med bostäder.

Our greatest interest within crop farming is to grow sugarbeets, that?s why we want to write about something new in this sector. We heard that a new concept had come to Sweden so we wanted to find out everything about this machine. This new technique was a self-propelled cleaning loader for sugarbeets. This machine is supposed to replace a loader and a cleaning machine when the sugarbeets is going to be loaded, cleaned and delivered to the sugerbeet Factory. The cleaning loader picks up the sugarbeets with rollers from the pile, which is placed close to the road.

Traditionally, mining has been performed mechanically with implementation ofyesterdays (and older) data. Several mining companies have started to useautonomous technology and robotics in the production areas although the harshmining environments make it unsuitable for today's electronic equipment. Despite allthe obstacles along the way of digitization, there seems to be no end in sight as thisdevelopment continues. This thesis focuses on what the mining industry is aiming forand why the mining companies are interested in these technologies. The actors of themining industry can be found to have a vision for the future mine, a production with ahigher degree of digitization and resemblances to a Factory.

The industrialized timber housing process is capable nowadays to build multi-storeyhouses since fairly new changes in the Swedish regulations where made after theadmission of the European Union in 1994.The industrialized process moves parts of the construction process into a highlyeffective Factory where 3D-volumes of the building are prefabricated beforetransportation to the building site for assemble.The assembly process is relatively effective compared to the completion of thebuilding service system and this is therefore the main focus in this thesis. This thesisattends problems with completion of the building service system, and thereforedemarcates from other aspects, such as technical and economic aspects, of thebuilding service system.The degree of completion of the flats differs from completion of the connectivepassages, for example hallways, in a way that suggests a need for further investigation.This thesis includes analysis of the possibilities to increase the prefabricatedconnective passages, to the extent of containing building service systems.An increase of the prefabrication of the building service system has a greatdevelopment potential, even though some restraining factors need to be solvedbefore implementation.This thesis was made in collaboration with two of Sweden?s leading companies on themarket of multi-storey industrialized timber housing, Moelven ByggModul AB andLindbäcks Bygg AB..

Soybean meal from South America is the most common protein feed used for animal production in Sweden. Production of soybean has negative effects on the environment and the transports from South America to Sweden causes considerable CO2 emissions. Therefore it is a growing interest in locally produced protein feed in Sweden. Protein feeds that are possible to grow in Sweden are rapeseed, peas, faba beans and lupins. Those are adapted to the Nordic climate and are perfect to grow in cereal rotations.

The aim of this essay is to get deeper into the mysteries of love as they manifest themselves as most open: in literature. I have studied the two French writers Claire Etcherelli and Françoise Sagan, both writing about love in the 50?s Paris. While Etcherelli?s love takes place between Factory workers, Sagan?s scene is the upper middle class.

PDF-files are to become a native file format in all prepress supplier workflows during 2006. This will give an opportunity to automate and develop a more stream lined prepress workflow. It is desirable to secure digital files by preflight the files early in the process. The objective with this project is therefore to find software that can automate parts of the preflight process and also to build up a well-functioning preflight workflow for preflighting both PDF-files and native files.Meetings have been held with preflight suppliers to find a solution for how to automate parts of the preflight in the prepress workflow. Seven preflight software companies demonstrated the possibilities with their products and four of these were chosen for continuing working with.