Problemet med dagens standard för hygienrum och dess komponenter är att de baseras helt på tillgänglighet. Vilket i och för sig är en bra sak, sett utifrån att fler personer kan ha möjligheten att utnyttja bostadsfunktionerna även om de har vissa rörelsehinder. Men vi vill ta steget längre, inte endast se till tillgänglighet utan även se till vad som kan uppskattas, för att höja levnadsstandarden och uppskattningen av våra hem. Den svenska standarden är som tidigare nämnt baserad på tillgänglighet och är inte alltid anpassningsbar till nya lösningar och komponenter som kan förekomma i badrum, vissa saker ändras, får nya funktioner, kanske utökade användningsområden. Syftet är att försöka utöka möjligheten att nå högre kvalité för badrummet och samtidigt försöka se till de alternativa lösningarna som kan åstadkommas idag.

The modern veterinarian in horse practice is often consulted by horse owners concerning riding problems. These problems are more complex and show other characteristics than traditional lameness. For the diagnostic process and to give adequate advice the veterinarians need an understanding of riding terminology and problems related to riding. It is also of high importance that riders, trainers and veterinarians increase the knowledge of equine biomechanics and how these are influenced by the rider. Collection is an important concept in the riding terminology.

In the year 1800, about 5 % of the world population lived in cities (World Wide Fund for Nature, 2012, 3). Today that number is about 70 % in Europe and North America, and in 2050 it is expected to be 86 % in the developed world and 67 % in the developing world (www, UN, 2009). In addition, the global population is expected to increase with 2.2 billion people until 2050. As a result of the population increase more food has to be produced which requires more transport from the countryside to the cities. However, this flow of resources faces some difficulties.

The development of five individual pupils? writing abilities, as reported by six of their teachers, is analysed. The thoughts and reflexions inspired by the everyday interaction between the teacher and the pupil suffering from some kind of reading and writing disability are presented. The purpose is to capture what was unique and characteristic in the measures that triggered a positive response in the pupils. Some of the questions answered in this study are: How does the phenomenon of reading and writing disabilities manifest itself in the classroom, and what are the consequences for the individual pupil of the various pedagogical measures available?One conclusion that may be drawn from this study is that there is no cut-and dried method for working with pupils suffering from reading and writing disabilities.

The formulation of visions into practical projects is an important part of the professional expertise of landscape architects. This expertise includes the gathering, structuring, improvement and utilization of knowledge. Project models have been developed to provide tools for the implementation and governance of projects, as well as means of learning, reflection and survey of individual projects. The aim of this thesis is to describe some general project models and their theory, and to describe practical, real-life examples of project models used within landscape architecture. Questions asked are: ? How do the processes of idea to construction in landscape architectural projects lool like? Do project models have a relevance for the mission of landscape architects? ? Is a common project model used within such projects, or is the project model varying depending on e.g.

The business potential of software defined radio (SDR) technology is studied by evaluating whether or not its characteristics correspond to those particular to a disruptive technology. The maturity of the SDR technology concept is illuminated by analyzing the opinions and perspectives of a selection of representatives for different stakeholders in the wireless communications market. Characteristics as, for example, the degree of consensus about the utility of SDR technology and the awareness of features and limitations are studied by application of the theory of technological frames. This theory helps us understand how and when technology evolution takes place. Finally we describe the value network structures of some potentially viable application areas for SDR and suggest some possible business opportunities based on SDR technology.This thesis is carried out as a case study and the research data is obtained from secondary sources, such as literature and Internet publications as well as interviews with people well experienced in the field of wireless communications.

Avdelningen för verktygskonstruktion på Gestamp HardTech i Luleå utvecklar och designar presshärdningsverktyg i I-DEAS12. Dessa presshärdningsverktyg används för att tillverka krocksäkerhetskomponenter för personbilsindustrin. Presshärdningsverktygen fungerar som pressformar i en process där krocksäkerhetskomponenterna pressas från platta borstålsämnen till sin slutliga form. I samma process sker en härdning samt en anlöpning av produkterna. Resultatet är starka och sega komponenter som tar upp mycket energi vid deformation.

One of the distinguishing features of successful societies is the ability to adapt to change, bothsocial but also natural changes like climate change. Climate change is a complex, dynamic,non-linear process with a great deal of uncertainty concerning the time perspective, risks andconsequences. A combination of factors like climate change, geographical vulnerability, adensely populated and highly built up coast line along with factors like deficient handling ofsurface runoff and a large usage of ground water leads to an increasingly vulnerable society. Italso puts a greater pressure on the society to have preventive measures in place.The number of actors working with preparing society to the expected impacts of climatechange and variability is increasing. However more than half of Sweden?s municipalities donot consider changing climatic conditions when planning, and many times even allow theconstruction of new living areas in known climatically vulnerable areas.

Addressing increasing global environmental problems requires greater resource efficiency, and one way of working towards this is through industrial symbiosis. Industrial symbiosis means that companies collaborate through sharing of resources for collective benefits. The documented benefits of working with industrial symbiosis indicate that there is potential for companies to operate commercially with facilitation of industrial symbiosis. An interesting company to study within this context is Econova. Econova operates within the recycling and gardening industry and has been identified as a possible catalyst for industrial symbiosis.

Addressing increasing global environmental problems requires greater resource efficiency, and one way of working towards this is through industrial symbiosis. Industrial symbiosis means that companies collaborate through sharing of resources for collective benefits. The documented benefits of working with industrial symbiosis indicate that there is potential for companies to operate commercially with facilitation of industrial symbiosis. An interesting company to study within this context is Econova. Econova operates within the recycling and gardening industry and has been identified as a possible catalyst for industrial symbiosis.

Evaluations of open Ditch status and function, with an assessment of suitability of a conversion to a two stage ditch as a low maintenance alternative. To illustrate Swedish drainage problems this work focused on two agricultural drainage associations assessed in detail with a new method called MADRAS (Minnesota Agricultural Ditch Reach Assessment for Stability). With the assessment of the MADRAS method estimates were made to conclude the ditches operating problems. This was made through measurements of sediment depths, mass bank failures etc. in order to quantify ditch problems and propose practical actions for improved ditch stability and water quality. The MADRAS surveys were conducted in two main ditches that drains 2900 hectares of land on the northern shores of Mälaren. In the study measurements of the ditch cross-sections were also conducted to compare actual profiles with the original map profiles. The evaluation showed that parts of the studied ditch sections were operatively poor; main reason was mass bank failure, undercut channel banks, sediment aggregations and narrowed ditches. The profile survey shows that a majority of the profiles 80 % has sediment accumulations there remains only 64 % of the original profile from the map.

Th is thesis is about how to create communicative images. It is mainly for landscape architects. With communicative images, I mean images created with the purpose to communicate a proposal or idea in a direct way to. By only looking at the image, the viewer should get an idea of what the proposal entails. A communicative image should also create an interest in the proposal.

The purpose of this thesis is to show how a good approach can be designed, focusing on the southern approach to the Swedish town Vilhelmina. Prior to the car being part of everyday life, the approach was a road where the town showed itself from the very best side. When the amount of traffic increased, so did noise and other disturbances, and as a consequence industrial areas replaced the residential buildnings at the approaches. Today, the pendulum is turning back and in recent years the approach is regarded as a place to introduce the town. The approach is also the place where cars should slow down from the speed of the main road to the speed of the city.

Gestamp Hardtech är världsledande inom presshärdningsteknik och producerar karossdetaljer till bilindustrin. På företagets anläggning i Luleå finns avdelningen för verktygskonstruktion och här tar man idag fram presshärdningsverktygen. Konstruktionsmiljön på avdelningen för verktygskonstruktion består idag av CAD-systemen CATIA v5 och I-DEAS 12. Eftersom I-DEAS 12 inte längre utvecklas av tillverkaren, så kommer avdelningen i framtiden gå över till CAD-systemet NX. I och med denna övergång kommer företaget också att implementera PLM-programmet Teamcenter.

Gestamp Hardtech är världsledande inom presshärdningsteknik och producerar karossdetaljer till bilindustrin. På företagets anläggning i Luleå finns avdelningen för verktygskonstruktion och här tar man idag fram presshärdningsverktygen. Konstruktionsmiljön på avdelningen för verktygskonstruktion består idag av CAD-systemen CATIA v5 och I-DEAS 12. Eftersom I-DEAS 12 inte längre utvecklas av tillverkaren, så kommer avdelningen i framtiden gå över till CAD-systemet NX. I och med denna övergång kommer företaget också att implementera PLM-programmet Teamcenter.