Saab Microwave Systems (SMW) is a business unit within Saab AB that manufactures and develops different types of radar- and sensor systems for naval, airborne and ground based forces as well as within the market for civil security. In addition to the manufacturing of radar and sensor systems they also provide different types of service concepts. The business unit has 50 years of experience within the area of developing radar systems and is considered to be one of the market leaders. When applying an assemble-to-order production strategy with products at this level of cost price the product lead-time is vital and becomes an important part of the strategy within marketing and sales. Within SMW there is a new department called Supply Management (SM) that provides the supply of incoming and outgoing material. Within SM there are four sub-departments working with activities such as planning, purchasing, receiving inspection, storage and distribution.

Hammarby Sjöstad is a new district of southern Stockholm built with focus on reduced environmental impact by recirculation of materials and sustainability. The environmental goals aim to cut the water consumption by half and a separate storm water treatment. Thus, the wastewater will be more concentrated and will originate from the households only. The Sjöstad project includes the idea of a local treatment plant for the household wastewater. To evaluate this possibility, Sjöstadsverket, an experimental treatment plant was constructed.

The expansion of the Swedish hydro power has contributed positively to the reduction of the environmental impacts from the fossil fueled power production. In the same time the extensive expansion has been proved to cause negative ecological and local environment impacts of a stream. This, in turn, has been affecting the biodiversity and fish stock negatively, which has been reduced. One of the underlying problems is the lack of possibility for the fish to pass the plants, but it is also directly correlated to the mortality rate of the fish passing through the turbine, which this study is investigating.The mortality rate has been computed for three different locations in Sweden, Untra, Tännfallet and a third one whose location is confidential, and is denoted as Case 1, 2 and 3. The model used to calculate the mortality rate in this investigation is based by existing blade strike models and knowledge and are investigating the death due to mechanical injuries from collision with a runner blade in the turbine.

The aim of this Master?s thesis was to find out more about the delimiting quality- and shelf-life parameters over time for liquid oat-based products. According to that, to present applicable subjective and objective shelf-life test approaches at accelerated conditions. The study aimed to gain a deeper knowledge concerning the general and accepted way of performing accelerated storage tests. This study focused especially on products, which suffer from quality failure caused by oxidation, such as liquid oat-based products.

There are many old dams in Sweden and, since few dams are constructed today, the main task in risk assessment on the existing dams is often to reduce the risk of failure. RIDAS (Swedish Guidelines on Dam Safety) is used when designing new dams and assess the existing ones. The guidelines include stability requirements for different failure modes, e.g. overturning and sliding, which imply that the load effect from e.g. uplift and ice load need to be less than the resisting loads or moments.

The following thesis is a study of the forest history on the island of Ängsön-Marskär concentrating on the last three hundred years. The island is located in the administrative province of Stockholm, the local community of Haninge and it is situated approximately seven kilometres east of the island Ornö in the south of the Stockholm archipelago. The questions this thesis attempts to answer are: How where the natural resources on Ängsön-Marskär used through the centuries? How has the state of the forests developed since the 16th century? How will the nature develop onwards? The thesis is based on archival sources for Ängsön-Marskär and the surrounding areas. A field study was conducted where the entire island was investigated using an objective forest inventory method. The first map material existing over Ängsön-Marskär is from the year 1711.

The agricultural sector accounts for about 13 percent of the total load of greenhouse gas emissions from Sweden (Swedish Environmental Protection Agency, 2007). The Swedish objective to reduce the greenhouse gas emissions with 40 percentage units to the year of 2020, based upon the year of 1990, might imply stricter regulations for Swedish farmers. A regulation or other forms of economic incentives is probably necessary to reduce the emissions originating from the agricultural sector. This study aims to investigate the economic and managerial impact on two agricultural firms with differing production system given that a constraint on green house gas emissions is introduced. Gases included in this study are carbon dioxide, methane and nitrous oxide.

This report was written as a final thesis within the Department of forest economics at the Swedish University of Agricultural Sciences as a completion of the M.SC Forestry programme. The aim of this study was to create a model that, with respect to given stock levels, temperature, fuel usage and fuel price, would identify the optimal levels for purchase of bio fuels, optimal levels of incineration of bio fuels and the sum of the present values of all costs. The model would be applicable for a larger district heating plant. Data regarding temperature were received from SMHI. Information considering fuel prices was taken from the Swedish Forest Agency and the facts about fuel usage were collected from a large district heating plant, located in the southwest of Sweden. For the temperature, a sinus curve was adapted to describe the temperature over a year.

Concentration of protein in bovine milk is one of the most significant milk quality parameters, to a large extent determining the price for milk to the producer. Mastitis is a common disease among dairy cows, negatively affecting not only milk yield but also milk protein composition. Milk from mastitic cows tends to have lower cheese yield, negatively affected processability properties and sensory quality, due to changed protein quality and composition. Poorer milk protein quality would have an economically negative impact on dairy industry. Only few studies have investigated the short term effects of mastitis on milk protein composition.

Bakgrund: Denna litteraturstudie handlar om avnavling och när det är optimalt att avnavla det fullgångna friska barnet. Avnavling har länge varit ett diskuterat ämne bland obstetriker, barnmorskor och föräldrar. Föreliggande studie ska bidra till att öka barnmorskans och övrig vårdpersonals medvetenhet om när avnavling bör ske och när det är fördelaktigt för barnet att avnavlas. Rekommendationen är att friska fullgångna barn avnavlas sent om inte situationen kräver en tidig avnavling eller att föräldrarna önskar tidig avnavling pga. donation till biobanken.

ÖREBRO UNIVERSITYDepartment of Behavioural, Social and Legal SciencesC-essay in Social work, Advanced course2006To give up a criminal life styleA study of motivation and protectional factors of juveniles after a sentence of institutional care or community workEmma Henriksson & Karin TengnäsABSTRACTThe purpose of the study was to investigate the factors that juveniles sentenced to institutional care or community work perceive as important for their decision to give up a criminal life style. The study approach was based on a few specific questions: (1) What aspects of the treatment have contributed to a motivation to abandon the criminal life style? (2) What have motivated the juveniles to make a decision to leave the criminal life style? (3) Are there any specific internal or external protectional factors that have been decisive for the rehabilitation process and, if so, are they linked to intrinsic or extrinsic motivation? The study rests on the theoretical foundation created by earlier research on institutional care, motivation and protectional factors. Interviews were chosen as a method to secure qualitative data and the interview manual was designed on the basis of themes that reflect the questions of the study. Six young people?s perception of their treatment is documented in the study, as well as their opinion on the effectiveness of the treatment.

This thesis deals with numerical simulation of earth pressure against tubular bridges in the software Plaxis. Plaxis is a FEM (Finite Element Method) software based on numerical calculations for which approximate solutions are developed through an iterative process. The program is specifically designed for soil and rock mechanical tests, such as voltage and deformation calculations in soil.The Royal Institute of Technology conducted in 2005, field tests on tubular bridges of corrugated steel, which was part of Ersa Bayoglu Fleners PhD (Bayoglu Flener, 2009). She studied how two different tubular bridges deformed during installation and filling. Tests and measurements were made during filling.

Mastitis in dairy cows is an emerging and challenging disease in the tropics, including India. Nation-wide reports suggest that the incidence of clinical mastitis varies from 3.94% to 23.25%, and for subclinical mastitis from 15.78% to 81.60%. In Assam, a northeastern province of India, dairy is an essential part of the mixed farming system that exists in the state, but the milk yield is far below domestic standards. In 2009-2010, International Livestock Research Institute (ILRI) and local associates started to develop a training program for local farmers in Assam, in order to enhance the informal bovine dairy sector in and around Guwahati, India. The project continued until mid-2013.

 AbstractMedia has since a long time back been writing about extensive thievery of recreational boats and their engines. The value of the stolen goods is estimated to several hundreds of million Swedish crowns per year. The widespread stealing creates a secondary market where boats sometimes are sold by sellers that do not have the rights to sell the boat. This creates risk for the buyer who most often is a private person. A situation the buyer can face is that the boat was stolen and that the original owner can demand to get the boat or engine back.

Volvo Powertrain tillverkar motorer och drivlinor till AB Volvos samtliga dotterbolag förutom Volvo Aero. Vid anläggningen i Skövde tillverkas motorer och delar till motorer och växellådor och vid anläggningen finns alla tre nödvändiga produktionsområden; gjuteri, bearbetning och montering. När rådande lågkonjunktur slog till stod bearbetningen med väldigt höga lagernivåer vilka företaget snabbt tvingades sänka då det blev huvudfokus från koncernledningen att minska det bundna kapitalet. Utan egentlig analys sattes nya gränsnivåer för lagren inom samtliga avdelningar på bearbetning och målet med examensarbetet har varit att ta fram en metod för att dimensionera säkerhetslagret på optimal nivå med bibehållen hög leveranssäkerhet. Därigenom skulle företagets lagernivåer kunna styrkas med hjälp av en teoretisk grund.Som utgångspunkt har en lagernivådimensionering med servicenivåkonceptet SERV2 och där alla artiklar tillåts ha differentierade servicenivåer använts.