After emergencies involving chemical spills it is of great importance that correct measures are taken with short notice, both for the security of people and in order to minimize future environmental consequences. The RIB-unit at the Swedish Rescue Services Agency initiated this study, the aim of which is to propose changes to the existing chemical transport calculation tool: Chemical Spill 3.4, included in RIB - Integrated Decision Support for Civil Protection, so that it can be used for decision support as well as in preventive work. A rough estimation of chemical transport in the subsurface is considered being of great importance when making decisions during emergency response operations.The proposition presented in this report is a non site specific chemical transport model which is designed to give a rough estimation of NAPL flow in homogenous isotropic soil shortly after an instantaneous release. The model can be used at two levels; both in situations without access to information on subsurface properties, and with more accuracy in situations with knowledge of the included parameters. For that reason the user can choose among predefined alternatives or assign the parameters a numeric value to increase the quality of the model output.

This report deals with the performance of a batch flow treatment of landfillleachate compared with a continuous flow system. The parameters in focus were total Kjeldahl nitrogen (TKN), BOD5 and COD. The pilot-scale experiment used eight barrels with a volume of 150 liters. Each barrel was constructed differently concerning its flow, its bed material grain size and its presence of plants or not. Four of the barrels worked in batch mode, thus four in continuous flow mode.

This report describes the construction of a climate-cabinet for testing of HV-cards (High Voltage) produced at VG Scienta. The main part of the report describes all the different components of the cabinet. The most important parts are a PID regulator from Eurotherm model 2408, a solid state contactor (SSC), a thermocouple, a finned resistor from DBK and different fans. The report even includes the connection between components by cable wiring, isolation, grounding, fuses and shaping of metal goods.As the cabinet also communicates with a computer, the report includes the solution of the data communication using the software iTools from Eurotherm. The communication part includes information about a converter that converts EIA422 to USB.The cabinet was produced at a company, called VG Scienta, in Uppsala during the spring 2010.

The mining company LKAB extracts iron ore in three areas in the north of Sweden, Kiruna, Malmberget and Svappavaara. The iron ore is refined and in the pelletizing plants the material is rolled to finished pellet product. The different steps of pelletizing plants causes among other things emissions to the air. It occurs occasionally stops in the production and the emissions are vented via an emergency chimney without purification. The aim for this work is to look into how LKAB may improve their monitoring of air emissions and control of ambient air quality and the analysis methods which are suitable for measuring.

Sprinkler media a?r ett nystartat produktionsbolag i utbildningssyfte, detta fo?r att fa? vetskap hur det kan fungera inom ett nystartat fo?retag och fa? en inblick o?ver verksamheten samt hur en budget tas fram. Sprinkler media specialiserar sig inom film, animation och postproduktion. Ide?n med ett produktionsbolag var att go?ra varierande arbeten a?t externa kunder.

This thesis describes redesign and adaption of a products housing. In order to make it more economical to produce at a lower production volume. The thesis is based upon a prototype that a previous student developed for injection moulding. The goal is to find alternative manufacturing methods, but also to identify parameters that affect the cost of the injection moulding tool.The housing must be tough in order to protect the circuit board inside. But at the same time it must allow sound, light an electrical communication to pass through.

The main purpose of a Flight Data Recorder (FDR) is to facilitate the investigation of incidents. In order to interpret the data that has been recorded in the FDR the data has to be visualized in some way. This can be done with software on a computer or with hardware that is specific for the model of aircraft that the data originates from.The aim of this project is to visualize data for six parameters from the FDR of Saab 2000 in an avionics rig. The avionics rig resembles the cockpit of Saab 2000 and the displays in it are identical to the ones found in the plane. All six parameters are shown on the same display.Due to safety regulation vital systems in aircraft are doubled, with one system on the left side and one on the right.

Where is technology heading? And how will our behaviors towards these new innovations look? This project questions the direction of ?beyond smart? products, through scenarios within our everyday life. The work is both critical and speculative. Speculative in the sense that it is speculating in how a future scenario with ?beyond smart? products would look like.

The aim for the project was to develop a risk analyse tool for measuring the fire safety level in Cultural Heritage buildings of Visby, Gotland. In 1995 Visby were taken into the Unesco:s World Heritage List with the explanation ?Visby is an outstanding example of a Northern European walled Hanseatic town which has in a unique way preserved its townscape and its extremely valuable buildings? One of the demands for the tool was that it should be easy to use and result into a ranking level in examined buildings. The user of the tool is recommended to be personnel in the fire department. To develop the tool a Multi Attribute Decision Making (MADM) method was used.

This thesis work resulted in a template for how the thermal spray process can be controlled through robot programs. The robots today and their programs need to be replaced, therefore a new structure which can be matched with the new robot systems is needed. The work is limited to only concern structured programming on the new robots on Thermal Spray Centre (TC) with the programming language Rapid. The basic data for the program was retrieved from interviews with concerned personnel at TC, from studies on process parameters for thermal spray and from existing specifications at Volvo Aero Corporation (VAC). The thesis work briefly describes the process thermal spray and the four methods used at VAC.

The freshwater pearl mussel (Margaritifera margaritifera) is a large freshwater mussel. Because of its sensitivity to human impact, such as eutrophication, acidification and alterations of hydromorphology, the species is considered as a robust indicator of stream water quality and biodiversity. Moreover, due to the species complex life cycle, including a larval stage on the gills of salmon and trout, and sensitivity of early life stages, regeneration is often used as an indicator. The freshwater pearl mussel is also used in the expert judgement of status classification of benthic invertebrates according to the European Water Framework Directive. The purpose of this study was to gain a deeper understanding of the freshwater pearl mussel as an indicator for Swedish streams. It was made with two types of association analyses.

Underlättar kongruens mellan sinnestillstånd och påstående (vad gäller dess värdeladdning) vid bedömning av ett påståendes sanningshalt? Denna fråga uppkom via studier av embodiment och lögner, forskning från de båda områdena påvisar nämligen att olika ?kroppsliga signaler? kan hjälpa oss att avslöja om andra människor ljuger. Frågan har undersökts via en faktoriell design med repeterade mätningar där deltagarna försattes i olika sinnestillstånd varpå de utsattes för olika stimuli och fick göra olika bedömningar. Resultatet visade att kongruenta betingelser varken underlättar eller påskyndar vid bedömning av ett påståendes sanningshalt, däremot erhölls ett signifikant resultat som indikerade att kongruenta betingelser ökar människans konfidensnivå (högre grad av säkerhet vad gäller att en korrekt bedömning gjorts) vid bedömning av falska påståenden..

The purpose of this paper is to standardize and simplify the design work on a few specific types of storage brackets for balconies. The company Balco AB had the wish to simplify the design work in the preparation of attachments to their balcony structures. This would be done by a calculation matrix that could be produced which then in turn could be used for each new project by the company. The design work behind the development of these fittings at each new project is costly both in terms of time devoted by each calculation but also the cost of the time. The purpose of this report is that in a systematic manner, a calculation matrix can be created that then the company instead may follow from each new project.In carrying out the project used HILTI calculation program, which was provided by the company HILTI.

This thesis was carried out at Atlas Copco Tools and Assembly Systems. The purpose hasbeen to develop a design tool to be used for development of new electric motors for AtlasCopcos electric nutrunners. The focus of the thesis has been to increase productivity bydecreasing the power losses in an electric tool. The productivity is defined as themaximum number of tightenings a nutrunner can perform without becoming too hot.Before starting the development of this design tool an existing Matlab script, whichcalculates the losses in a slotless electric motor, has been studied and modified torepresent the real losses in a better way. The modification has been made by performingpractical studies of different losses and then adjusting existing parameters in the Matlabscript.Because design changes in one part of a mechatronic system can lead to a decrease inperformance of another part the choice of parameters that can be changed has been madeso that other parts of the system is affected as little as possible.A study of the existing tools efficiency during an entire tightening has been made toincrease the understanding of when and where the different losses appear and to comparethe modified Matlab script with the measured values.The design tool was formed so that it executes the Matlab script, that calculates thelosses, for a number of different design options and stores the alternative which producesthe least losses.

Sprinkler media a?r ett nystartat produktionsbolag i utbildningssyfte, detta fo?r att fa? vetskap hur det kan fungera inom ett nystartat fo?retag och fa? en inblick o?ver verksamheten samt hur en budget tas fram. Sprinkler media specialiserar sig inom film, animation och postproduktion. Ide?n med ett produktionsbolag var att go?ra varierande arbeten a?t externa kunder.