The aim with this thesis is to make a comparison between forcing tulips in a hydroponic system and the forcing off tulips that have been planted in soil. The results are mostly based on interviews with six Dutch and one Swedish tulip forcer and the managing director at the Horticultural Research Centre, Proeftuin Zwaagdijke, in the Netherlands. There are benefits and disadvantages with both methods. Tulip bulbs planted in soil seem to get a brighter colour after forcing, compared with those forced ?in water?.

At seed-growing the aim is to produce a commodity with high germination capacity, good soundness and purity, and also slight admixture of seeds from other species. The capacity of germination and the vigour of the seeds may become impaired in consequence of mechanical damage, infection of diseases, growth of mould, attacks of vermin, high drying temperature, secret germination, sprouting in the ears etc. The germ belongs to the outer and most unprotected parts of the seed, and consequently this is much exposed. Even quite sound seeds can instantaneously have low capability of germination. It can be due to the fact that the seeds are in rest of germination, i.e.

The conditions for a good silage process start with good wheather and choice of crop, then choice of harvesting machinery. The shorter and more mechanically treated crop, the better quality of the forage. (Pauly 1994). This study has examined the variations in chopping length depending on harvest method. Precision choppers works with a rotating chopping cylinder, where the crop is cut into pieces.

The thesis first objective was to develop field instructions for forest planning of native forests in Andean Patagonia, and the second objective was to test the plan on an actual property in the area. The thesis was limited to studies in the province of Rio Negro. Today, there are no official forest management plans for native forests in the Argentinean province of Rio Negro; thus, there is an obvious need for an official forest management plan with clear guidelines. To be granted permission to manage, i.e. through thinning, the native forests on a property it is required to have a forest management plan that is approved by the Forestry Board in the province in question (Thill, B.

Chemical stabilization of mine waste from Ljusnarsbergsfältet with sewage sludge and calcium carbonate residuesMine waste from Ljusnarsbergsfältet in Kopparberg, Sweden, is considered to constitute a great risk for human health and the surrounding environment. Some of the waste rock consists of sulphide minerals. When sulphide minerals come into contact with dissolvedoxygen and precipitation, oxidation may occur resulting in acid mine drainage (AMD) and the release of heavy metals. The purpose of this study has been to characterise the waste material and try to chemically stabilize the waste rock with a mixture of sewage sludge and calcium carbonate. The drawback of using organic matter is the risk that dissolved organic matter can act as complexing agents for heavy metals and in this way increase their mobility.

The most predominant method for forest harvesting in Sweden is the cut-to-length method based on two-machines, a harvester that fells trees and cut them in a predefined length, and a forwarder which transports logs to a landing area for further transport to a processing facility. New machine solutions have to be much gentler to the ground than today?s machines. To be able to develop a forestry machine that preserves the terrain requires a proper understanding of the interaction between tire and soil.The goal of the project is to contribute to the existing knowledge of forest machine tire-soil interaction and to develop a tire-soil model that enables dynamic simulations of forest machines operating in rough terrain. The modeling has especially been focused on the interaction between tires and soft ground.A comparison of theoretical data of different WES-based terrain interaction models and a comparison test data from a full scale field test is presented.

Som följd av den pågående urbaniseringen har de naturliga förutsättningarna för regn och smältvattnet att infiltrera i marken och återgå till sitt kretslopp på naturlig väg försvunnit i städerna. I Stockholm leds ungefär hälften av dagvattnet via VA-nätet direkt och orenat till reningsverken. Dagvattenflödet varierar kraftigt vilket orsakar toppar som överbelastar VAnätet  och är svåra för reningsverken att hantera. Istället för att ledas ut i VA-nätet ska dagvatten strävas efter att hanteras lokalt. Arbetet lägger fokus på dagvattenhanteringen för takparken på ett nybyggnadsprojekt i Stockholm, projektet PARK 1.

Using the Introductory Carbon Balance Model, ICBM, five different crop rotations with rye 1. Rye-Ley-Ley-Rye-Beans-Rye 2. Rye-Rye-Rapeseed-Rapeseed 3. Rye-Ley-Ley-Rye-Potatoes-Rye 4. Rye-Rye-Potatoes-Wheat 5. Rye-Rye-Potatoes-Beans-Wheat-Rye-Potatoes-Rapeseed were tested theoretically in four different cultivation scenarios ? Straw left on the field, biogas digestate added as fertilizer. Labelled ?+straw+BD?. ? Straw left on the field, only synthetic fertilizer. Labelled ?+straw-BD?. ? Straw harvested, biogas digestate added as fertilizer.

The efficiency of the harvesters work is more often reviewed, than the work of the forwarders. In a local Stora Enso office the differences between the harvesters reported volume of timber, and the actual volume delivered to the industry had been noticed. Therefore, the decision was made to do a review on the forwarders work. The review was conducted together with a worker from Vmf Qbera, who is working daily with wood measurement, in order to get a valid evaluation of the logs. Eight sites were included in the survey, and on each site 50 logs were marked. Approximately one third of the marked logs were pulpwood, and the remaining logs marked were timber.

Agricultural soils constitute the base in human food production and soil content of organic matter and plant nutrients together with soil microbial activity are all important parameters for high crop yield of good quality. These parameters are dependant on proper fertilization.Anaerobic digestion of organic wastes for biogas production generates a liquid residue called biogas residue (BR). It contains organic material and plant nutrients which makes ita potential fertilizer for arable cropping. However, it also contains heavy metals and toxic organic compounds and it is therefore in need of evaluation before usage.Microbial tests were performed aiming to evaluate the agronomic traits of four different BR and to find a viable procedure for evaluating slurry fertilizers. Two experiments where soil respiration and soil potential denitrification activity (PDA) was measured at fertilizer addition were performed.

Hemp is an annual energy crop that fits very well in Swedish crop rotations. It is an interesting crop with many benefits, for example its ability to establish a large quantity of biomass in one year. Hemp is easy to grow and out-competes unwanted weeds through its aggressive growth pattern without the need for pesticides. Interest in growing hemp and other energy crops is currently decreasing, apparently because of high grain prices. These high prices give a higher net profit that we believe could partly cover the cost of hemp cultivation, while the hemp in turn would improve the crop rotation and thus repay its debts in the form of increased yields of other crops. The great disadvantage of hemp is the lack of knowledge about spring harvest of the crop.

Within agriculture it is important to optimize the use of nitrogen, not only from an economic point of view but also to minimize damage to the environment. This can sometimes be difficult, especially within organic farming. Organic farmers are using increasing amounts of waste products from the food industry to cover their nitrogen needs. These different organic fertilizers release nitrogen at different rates and under specific soil conditions. Because of this, it would be beneficial to have a standardized method to measure the amount and rate of nitrogen mineralization from organic fertilizers. This project contributes to this knowledge by investigating whether relatively simple and repeatable laboratory methods can be used to estimate the nitrogen fertilizer value of organic fertilizers.

BIOGAS POTENTIAL IN GRASSES FROM WETLANDSMarvin MartinsThe purpose of this study has been to survey wetlands that are suitable for mowing and to analyze the biogas potential in the harvested grasses. A preformed investigation showed that there are suitable wetlands, which can be harvestable, namely those mowed formerly in traditional haymaking. The practice of traditional haymaking is dying out in Sweden today but there are several good reasons why it should to be reconsidered. Nature- and cultural values are obvious, also the unutilized energy in the grass.The suitable types of wetland that were specifically studied were the productive wetlands; meadow marshes and wet meadows. These wetlands are represented in the Swedish meadow- and pasture inventory database; (TUVA) and the Swedish national wetland inventory (VMI).

This thesis work has been performed at the Division of Assembly Technology at Linköping University for a period of ten weeks. The work is part of the project ProFlexA, which is a research project in collaboration between Linköping University, Lund University, and industrial partners such as Combi Wear Parts and Smålands Stålgjuteri AB.The casting process creates random incurred burrs and defects, which must be removed during a cleaning process to make sure that the cast can be sold. Automation has long been sought for the cleaning of castings due to, among other things, poor working conditions for staff, but this has proved difficult to implement with today's technology. Automation has for some time been available for more capital strong companies with large annual volumes, but for smaller companies with small-and medium-sized volumes, automation has not been an option.The goal of ProFlexA is to develop an automated cleaning cell aimed at small-and medium-sized volumes.The goal of the thesis is to do a pre study at ProFlexA?s partners on cleaning of castings, and develop concepts for automated cleaning of castings.By recording the process and cycle times, the cleaning of castings has been documented as it works today, and on this basis, information and statistics has been compiled.

Findus Sverige AB, referred to asFindus from now on, harvests peas during a period ofaround 50 days during the summer. The harvest generates about 30 000 tonnes of peas which gives around 40 000 pallets to distribute to the warehouses which Findus uses for final storage. Three hours after the peas are picked in the fields, they have to be frozen to keep their good taste and quality. Because of this the pallets are marked with a preliminary label with quality classification of the content. The Findus quality department then has one day to determine the correct quality of each pallet.