This paper addresses the need to review the modern presentation of textile archaeology in museums. It is time to look at textiles in archaeology with new eyes. The reality behind archaeological textilestudy is holistic, embracing many different aspects of society. The presentation of textiles has in my opinion become old-fashioned. I will show in my paper that Jonathan Adams? `seven constraints´ model, developed for research on ancient ships, can also be applied to textile research.

This paper addresses the need to review the modern presentation of textile archaeology in museums. It is time to look at textiles in archaeology with new eyes. The reality behind archaeological textilestudy is holistic, embracing many different aspects of society. The presentation of textiles has in my opinion become old-fashioned. I will show in my paper that Jonathan Adams? `seven constraints´ model, developed for research on ancient ships, can also be applied to textile research.

Rapporten beskriver arbetet med att ta fram en regulator för dosering av närsalter i en biologisk reningsanläggning. Anläggningen som renar vatten med mikroorganismer behöver extra tillsatser av kväve och fosfor för att effektiviteten ska vara så hög som möjligt. Det har visats att variationer av föroreningar i avloppsvattnet kräver olika mängder tillsatser av kväve och fosfor. En simuleringsmodell för anläggningen tas fram för att användas till en jämförelse mellan olika regulatorer. Simuleringar visar att man kan förbättra regleringen genom att använda sig av framkoppling av mängden föroreningar i inloppsvattnet..

When searching for better and more practical interfaces between users and their computers, additional or alternative modes of communication between the two parties would be of great use. This thesis handles the possibilities of using eye and head movements as well as voice input as these alternative modes of communication. One part of this project is devoted to find possible interaction techniques when navigating in a computer interface with movements of the eye or the head. The result of this part is four different controls of an interface, adapted to suit this kind of navigation, combined together in a demo application. Another part of the project is devoted to the development of an application, with voice control as primary input method.

In Sweden, the most common way to castrate a bitch is by midline approach. In this study, flank and midline approaches are compared in order to evaluate incision by the flank as an alternative technique for ovariohysterectomy in the bitch. The study was performed on straydogs in the central part of Thailand under field conditions. 32 bitches were included in the study. The castration technique was by flank and midline approach, alternating with every other bitch.

The object of this two years master's thesis has been to study a specific genre of personal archives by examiningthe archives of nine parents who have lost one or several infants. Using internet-based methods, (e-mail, Skypeand digital photographs), I have conducted qualitative research using a general interview guide technique. Usingresearch from archival theory as well as other fields, my material has been arranged and analysed according tothemes and recurring thoughts picked up from my informants during the interviews.My main theoretical aid has been that the role of parent who has lost a child is the starting point for the creationof the personal archives. Another important theory is my definition of the term ?document? as not dependent onmedium and format, but on usage: if an object has been used as a part of an archive, it is a document.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

A group of two people, Jelena Durkan and Johan von Heideken, have worked together on an assignment from the company August Lundh AB. The company manufactures plastic products for all sizes of catering establishments. The basis for this thesis is a pre-study which shows that many of the users would be more drawn to the plates that the company manufactures, if there was a motif on the plates.This thesis will present the method of application for the motif that best benefits the company, with regard to the requirements placed on the motif, application method and the costs. The group found five relevant methods that were more carefully examined and compared to each other. Those are:Laser engraving, Hot-stamping, Injection molding, In-mould labeling and Pad-printing.The tools that have been used to solve this problem are: Requirement specification, QFD and OEE.

VBG Produkter AB is a process-orientated company that develops, manufactures and markets trailer couplings with belonging coupling equipment, protection equipment against skidding and stands for wagon-bridge for heavy vehicles. The company feels that their set-up time in production for couplings is not at an acceptable level. Due to high demands of customer oriented production the intermediate stock level of included products within the assembly of couplings has gradually increased which has resulted in high inventory holding costs. VBG Produkter applies Kanban in their production, therefore it is important to produce exactly the necessary amount and avoid overproduction. The objective of this project is to suggest appropriate solutions so that VBG Produkter is able to reduce their set-up time in assembly of couplings, by identifying internal and external set-up time for the chosen process bushing cell.

This essay is a time-geographic study of workinglife mobilities and investigates two days of work for five respondents. One from home and the other from the persons workingplace. Qualitative and quantitative methods has been applied to illustrate and analyze the two days along with time-geographic constraints. The findings are concluded into themes which represent the two local pockets of order: Home and Workplace. Themes of home are: Comfort station, Household, Curtained-off, Tele-contact and Environment.

Results from previous studies have showed that people with depression has an impaired verbal fluency. The aim of this study was to investigate whether individuals with depression also generate more words containing negative valence. Controlled Oral Word Association test were administered to a group of 13 mildly depressed individuals and a group of 20 non depressed individuals. The fluency and valence of the words produced was analyzed.The results showed no significant differences between the groups regarding either verbal fluency or negative valence. However, a significant positive relationship was found between a negative mood and negative valence.