Business and organizations use computer network in a greater extension than ever before, especially for business-critical use. That increase the demand of security for all systems, both against internal and external threats. The demand on the authentication method used today increases. Today they normally uses password or some kind of smart card. I will performa literature study that will investigate the possibility to increase the security in authentication of users without the use of extra hardware.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on External analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

The PhonePages of Sweden is a company that develops software for mobile units, especially cell phones. This thesis treats the development of, and contingencies for, a mobile phone directory, using the limited resources found in a mobile unit. The project was implemented and executed at The PhonePages with the intention of creating a product to sell to a third party.By studying different solutions, their benefits and drawbacks, an abstract picture of the product was constructed. Problems covered include compatibility problems caused by todays platform diversity as well as problems with saving, organizing and presenting data.The main goal was to create a phone directory which does not make external information retrievals. The service should contain both company and personal information, with name and phonenumber.

Our purpose is to report on a few of the internal and external factors that influence a person to choose and dare to start his own company, instead of being employed. We would also like to get an insight on what is of strong importance when you establish a new company. This will be done with a theoretical and empirical study..

Outsourcing in IS/IT offers organizations the possibility to use external resources, maximize flexibility and focus on core business, this prompts many organizations today to be less keen on developing IS/IT-services in-house. Sourcing IS/IT is however a complex activity in itself thus requiring competencies in many areas of expertise and lots of organizations has experienced the challenge of managing the necessary competencies to ensure successful Information Technology Outsourcing (ITO). A literature review in the field of outsourcing revealed the lack of a comprehensive competency management framework with the ability to guide competency resource planning in ITO projects. In order to highlight the problem area, an extensive and thorough literature review and an empirical case study which investigated the skills and assets in ITO projects at ten major Swedish organizations was conducted. The study found that it is possible for organizations through structured analysis of their intellectual capital, using the competency framework developed within the study, to plan sourcing processes and prepare the necessary changes to ensure the ITO projects can be implemented with the desired effect..

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on External analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on External analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

The purpose of my study is to question the model service marketing triangle and propose an alternative ways of looking at service marketing. The study is based on a deep, qualitative research. In the research of the material an abductive approach has been used. The primary information sources are interviews with project workers, which are being analyzed together with the theoretical background in part argumentations in the course of the thesis. In the last chapter they are unified.

The purpose of this thesis project was to study how different companies are working with LastTime Buy and through that study propose improved ways of working with this for Scania CVAB. The project aimed at studying the work processes from three different perspectives:decision models, quality aspects and liability aspects between companies.To study this, qualitative interviews with one or several representatives from differentcompanies that are affected by or involved in Last Time Buy were used. Representatives wereselected partly from Original Equipment Manufacturers, suppliers, component manufacturersand companies offering third part solutions for Last Time Buy. The companies also reflecteddifferent industries. The interviews aimed to create an understanding for the methods used atthe different companies but also the ways of thinking and the knowledge behind the choice ofthese working methods.The analysis shows that the Original Equipment Manufacturers used very similar decisionmodels for Last Time Buy, but that external factors or the company strategy made them reachdifferent results.

The purpose with this essay is to study the public support givers view of the concept innovation and to study how the public support givers discuss and act around the division of public support to entrepreneurs innovations. The purpose is further to describe if the division of public support favour or not favour environmental innovations and to examine if the public support givers consider the industry for environmental innovations is profitable for the society?s economy.We have done several case studies where we have interviewed eight public support. Support givers in this essay are defined as public authorities and other organisations on local, national and/or international level that gives public support to innovations. The public support givers that take part of the essay is VINNOVA, ALMI Stockholm, Innovationsbron, Energimyndigheten, SU Holding AB, KTH Holding, Västra Götalandsregionen and MISTRA.Our theoretical starting point is Silverman and Baums theory ?Picking Winners or Building Them?.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on External analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

The aim of this thesis is to examine how personnel working with asylum cases at the Swedish Migration Board handle their role as administrators of asylum. For the study 7 asylum administrators were interviewed and the analysis was made with influence from the method critical discourse analysis. To understand the themes in the analysis I have used Michael Lipskys theory about street-level bureaucrats. Main results from the analysis of the interviews were that the street-level bureaucrats had certain strategies for managing the difficult aspects of the job. The interviews also showed that the participating informants had difficulties with different identity positions..

The use of entertainment in various kinds of business events has recently increased in popularity among Swedish firms. Often, stand-up comedians are hired to entertain the employees or customers during these happenings. Generally, the firm invests a considerable amount of money in this service and is furthermore willing to pay a premium for a famous comedian. Although the market for this type of service is fairly large, the knowledge of the motives behind the investments is yet limited.A grounded theory study is carried out exploring the purpose of the entertainment as well as the rationales behind the preference for a famous comedian over an unknown. Two general types of contexts (internal and external) are identified and a number of objectives related to each type are distinguished.

A study to optimize insulation thickness for stock-, industrial- and office-buildings for external walls and roof in an economical perspective has been conducted on behalf of DynaMate. DynaMate?s role is to maintain all Scania?s buildings. Analysis has also included other parts of the building envelope, such as windows, exterior doors and industrial doors. In this thesis, three different types of exterior wall constructions has been investigated, these are a sandwich design consisting of sheet metal and a another one consisting of concrete, as well as a wall of concrete with a coating of plasters.

The Uppsala based company Q-linea develops procedures, instruments and systems for protein and nucleic acid analysis. The components in such an instrument are controlled by microcontrollers. Microcontrollers are computers in one singular chip that can be used in a wide range of applications such as cars, toys or in this case an analysis instrument. When developing a new instrument for biochemical analysis, Q-linea needed new software for controlling and communicating between the components in the instrument. The process of developing this software is the subject of this thesis.The project included research of microcontrollers and the components in the instrument.