Entrepreneurship is said to be the missing link between knowledge and growth in the Swedish economy. New ventures run a high risk of failing and this holds true especially for technology ventures. Since company leaders have proven to exert an influence on organisations' survival possibilities, the selection of an appropriate CEO is important. The purpose of this study is to describe the importance of the CEO for ventures as well as to explain how knowledge and experience affect the opinion of who should be CEO. Using a qualitative case study research design including three life science companies, we show that there are three main factors crucial when selecting a CEO.

The purpose of this study is to show what melancholy and irony in my poems express and what techniques that are used to accomplish these effects. Many theorists, among them Sigmund Freud and Julia Kristeva, characterize melancholy as an experience of loss, and therefore one of my questions is what kind of losses appear in my poetry. In search for an answer I analyze the texts from both a psychoanalytic and a sociological point of view. In the latter perspective I discuss the postmodern society using concepts from contemporary thinkers like Zygmunt Bauman, Fredric Jameson and Jean Baudrillard. Finally, I also examine if melancholy has an influence on the form of the poems.

This Master Thesis investigates changes in Thailand's foreign policy towards its neighbouring country Burma. It argues that Thai foreign policy towards Burma has experienced major changes during four periods between 1945 and the present. The thesis investigates these foreign policy changes during the four periods. What changes occurred? What were the reasons for the changes? What reasons dominated during what periods? The four periods of Thai foreign policy changes towards Burma and the common history of the two countries since their respective foundations does not suggest a stable peaceful relationship or a bitter hostile relationship leading to war.

Quality was earlier only an issue for the company?s quality departments but today is the entire organization involved in quality- and improvements work. With the customers in focus, both external and internal, quality and improvement work should be integrated in the daily activities. The management shall state goals and visions together with a policy. Through participation the correct requirements for a successful work are created.With SPC, statistics process control, there is an opportunity to perceive variations in the process and with the correct tools make it stable.

This study concerns digital stories told by five young Romani students and one teacher from Roma Culture Class in Stockholm, Sweden. The theoretical framework draws from theories concerning identity, culture,Romanipe, the Romani value system and social semiotics. The material for the study is the digital stories that were analyzed qualitatively. The results show that the young Roma in the study demonstrate pride in their Romani background and culture, but also signs of changes and development in their culture. Some of the participants do not show external signs of Romani traditions, for example in the ways of dressing.

The purpose of this study is to analyze the handling of difficulties encountered by Swedish managers in Swedish subsidiaries in South Korea. By identifying the most common and possibly most manageable difficulties specific to the market we categorized them into three different groups; external difficulties, internal difficulties and difficulties related to the leadership. Depending on where in the environment and in relation to which stakeholder the difficulties originate the managing process comes to be supported through sometimes contradictory theories. Our study implies that the proper handling is crucial to satisfy local expectations which are critical for survival of Swedish companies. It also implies that the leadership skills acquired by the Swedish managers combined with the level of acceptance for foreign managers among the Korean coworkers affect how influential the manager?s ambitions are.

 Since the 28thof May the project to develop an internal Innovation Leadership Program (ILP)on Accenture has been running and came to an end in November the same year. The taskwas formed into a master thesis and given to two students at the Royal Institute ofTechnology in Sweden.Since the start the content and structure of the ILP has been established based on the resultsof a theoretical study, a gap analysis and an external and internal benchmarking. The theoreticalstudy focused on articles, books and lectures about innovation, creativity and pedagogy. Subjectssuch as leadership, motivation, reflection and coaching were studied as well, but in a smaller scale.The gap analysis consisted of eleven interviews with people from different career levels withinAccenture and the goal was to establish the view of innovation and creativity among the employees.The interviews also asked about the knowledge the participants had about Technology Lab in orderto get insight of how to improve their communication and cooperation with people in client projects.Internally a similar program was studied called Minority Leadership program, whom will not bedescribed further in this report, to get inspiration. The external benchmarking was conducted onStanford and was very successful.

The eld of Brain-computer interfaces (BCI) concerns linking together an external device with the brain of a human or an animal. By doing this the conventional use of a mouse or keyboard can be circumvented, which can greatly benefit people with different types of diseases that cause paralysis or other loss of motor control, such as Amyotrophic lateral sclerosis (ALS). A BCI can also be used for cognitive training of either healthy or mentally impaired subjects to increase cognitive capabilities.In this thesis an implementation of an interface is made against such a device, the Emotiv EPOC Headset. The result is meant to be a stable basis for further study using the device. An in-depth study of the history of EEG and its current use in clinical work and research in the topics of BCI as well as Human-computer interaction (HCI) is presented.

The objective of this study is to examine the sustainability of recovering industrial wasteheat from several heat sources in a foundry constructed in a plant belonging to ITT Waterand Wastewater in Emmaboda, Sweden. A triple bottom line perspective will be appliedto achieve this objective. The triple bottom line approach takes into account ecologicaland social performance in addition to financial performance. The technology forrecovering the waste heat is a Borehole Thermal Energy Storage (BTES) which is aconstruction consisting of 140 vertical boreholes, 150 meters deep with an internal spaceof four meters.The calculated amount of energy for storage is approximately 3800 MWh annually. Ofthis amount 2500 MWh are expected to be utilized, while storage losses accounts for theremaining part.

The Swedish wolf population is like continue to grow and this will eventually lead to an increase in the predation of livestock. In Sweden carnivore attacks happen most frequent on sheep farms and the majority of these attacks are performed by wolves. Because of this, the main focus in this study is on the sheep and wolf problematic. It is not only the direct killing of livestock that affects the animals and their owners in a negative way. It has also been shown that livestock that lives close to carnivores sometimes change their behaviour in a way that will affect their ability to reproduce and to forage efficiently.

A substation must be properly protected against lightning and other external effects to the equipment in the station or staff, for that we use relay protection. They should also protect against internal errors which may occur as ground faults. There are different types of protection relays, but most common are overcurrent-, distance-, residual current- and differential protection.The purpose of this thesis was to deepen our knowledge of relay protection and to use the theoretical knowledge we got from the university studies in the work process. In the process we discovered which parameters were the most essential and calculated these for all relay protections on the substation. We also carry out a comparison between two brands of relay protection, ABB and Alstom.During our work we will test and simulate the over-current relays in a program called NEPLAN, the program will also calculate the fault currents.

Future emission legislation puts great emphasis on increasing the efficiency of the engine, thereby reducing fuel consumption. The tribological contact between cylinder liner and piston ring is where an great amount of energy is lost due to friction, and by reducing these losses an reduction in fuel consumption can be achieved.The aim of this thesis was to evaluate the tested piston ring coatings against a plasma sprayed cylinder liner and rank these combinations of materials for friction and wear resistance. The coatings that were tested was Cr + Al2O3, (Al,Cr)N, two types of CrN and WC / C.The experimental tests were performed with a so-called pin-plate, where used oil with addition of an acidic mixture of sulfuric and nitric acid to mimic the acidic condensate formed when exhausts recirculate, were added with a continuous flow. The results were then analyzed by weighing, studies by optical microscopy and scanning electron microscopy (SEM) and profile measurements.The results from each material combination were that the plasma coated cylinder liner wears too aggressively in order to yield a ranking of the piston ring coatings based on the parameters of friction and wear resistance. It is therefore proposed that an alternative coating on the cylinder liner should be developed, lacking the large abrasive wear on piston rings and that can withstand the corrosive environment resulting in engines equipped with EGR.

What is it that makes some events so successful, while others do not achieve the same results? According to most researchers and writers there are several factors that must be achieved in order for events to distinguish themselves from the crowd and be successful, but what are those factors then? The study was aimed to investigating the factors that create a successful sporting event. One person from each of the six largest children's and youth football tournaments, participated in this qualitative interview study. The results showed that factors such as; possessing a good knowledge of the organization, its external market environment and its stakeholders, proved significant. Similarly, to use the correct custom marketing methods, maintain and attract new stakeholders, and to have nice and caring work staff, were factors contributing to the success of wealth..

The purpose of the present study has been to investigate the attitudes of personell involved in the preschoolorganisation in a Swedish commune regarding injury risks for children in pre-school. Sixrespondents were interviewed in a qualitative interview study.Two different pre-school units were investigated, and it was found that they had surprisingly largedifferences in how they were working with children safety. However, in summary it can be said that therespondents perceived that child safety should encompass a safe and secure environment, however withthe important caveat that accidents can never be completely excluded, due to the natural anddevelopmentally important play of children.The investigated commune and pre-school units improved children safety mainly by using yearlyplanning meetings (Sw. "barnskyddsrond") where the physical environment in the school wasinvestigated together with external specialists. However, there are important differences in how the unitsworked within this framework, some units actively encouraging and others discouraging children andparent participation in the work..

In cooperation with the Gislaved company Lerocon AB [1], a separation module wasdesigned as a further supplement to the Module System. The aim of theprojectimplementation was that the separation module could be flexible enough to feed themetal pieces, screws, nuts and other items with large variations of size, appearance andmaterial composition. The module should also be cost effective to manufacture.A separation module is a design which is ment to streamline the work in industries withautomation of the lineoperations. The module feeds the details such as screws, nuts, washersand pieces of metal in a continuous flow in which traps separate the details from each other.Traps may vary depending on the purpose and of the details that are fed. Perhaps it isimportant for the user that the detail-orientation is right after the separation module, whichmeans that all the pieces witch aren´t are fed back in return.For companies and industries in lineoperations that can be made more efficient withautomation, are production flow an important watchword.