This examination work aims to describe how a supply chain around the biggest pellets factory in Sweden will be configured in a logistic perspective. The plant and associated infrastructure are in the building phase and will have production start on the 2 November 2009. The key question that is set in this examination work is to recognize the logistic processes which are essential for an effective flow of materials and information that link the source of supply with the ultimate customer. In order to get the answer, a flowcharting of these supply chain processes is required for understanding the pipeline activities such as input and storage of raw material, the production system and the output of pellets to the customers. The basis for this supply chain map is a model-based representation of these logistic processes and activities that are involved around the pellets factory.

Computer Forensics investigations have become more and more common while investigating IT-related issues. From experience, hard disks, USB thumb, memory sticks contains information that might be useful. Computer Forensics is regulary conducted by Police, Customs, Tax investigators but also within private companies and organisations. However, there are areas within the storage device that are not part of the organisied structure that a file system gives. The reason for that might be that the information has been erased by intention, a virus destroyed the file system and so on.

This is a final thesis done at BT, considering one of their forklift truck models called Reflex. The first part of this report is about a preliminary investigation investigating what kind of diagnostic systems BTwants to use, and also which demands there are to meet all expectations on such system. Secondly a diagnostic system, which will show if the drive wheel is worn out, will be presented. In the preliminary investigation, two kinds of diagnostic systems were mentioned. These were Model based diagnosis and Predictive analysis.

Future emission legislation puts great emphasis on increasing the efficiency of the engine, thereby reducing fuel consumption. The tribological contact between cylinder liner and piston ring is where an great amount of energy is lost due to friction, and by reducing these losses an reduction in fuel consumption can be achieved.The aim of this thesis was to evaluate the tested piston ring coatings against a plasma sprayed cylinder liner and rank these combinations of materials for friction and wear resistance. The coatings that were tested was Cr + Al2O3, (Al,Cr)N, two types of CrN and WC / C.The experimental tests were performed with a so-called pin-plate, where used oil with addition of an acidic mixture of sulfuric and nitric acid to mimic the acidic condensate formed when exhausts recirculate, were added with a continuous flow. The results were then analyzed by weighing, studies by optical microscopy and scanning electron microscopy (SEM) and profile measurements.The results from each material combination were that the plasma coated cylinder liner wears too aggressively in order to yield a ranking of the piston ring coatings based on the parameters of friction and wear resistance. It is therefore proposed that an alternative coating on the cylinder liner should be developed, lacking the large abrasive wear on piston rings and that can withstand the corrosive environment resulting in engines equipped with EGR.

In the country of Jordan, egg production is very important economically, but several bacte-ria are involved in food borne diseases transmitted from eggs or other poultry products. The most important are Salmonella spp., Campylobacter jejuni and Escherichia coli. In Jordan two different housing systems are used for hens in large scale egg production; con-ventional cages and litter floor systems. Eggs from four different farms were analysed and compared to see if a difference could be found regarding the presence of pathogenic bacte-ria on the egg surfaces between these two systems. Total number of aerobic bacteria was analysed, the presence of Salmonella spp., C.

Background: A large number of companies works as a link between manufacturers and final users. These companies buys and stores goods to be able to deliver when a need comes up later in the chain. The storage could have a negative effect on profitability and therefore places great demands on the management control systems. ABC as a method has been used with some success in manufacturing for over ten years. In wholesale companies the method is not frequently used.

The web is a constantly growing medium that presumably plays an increasing role in public library reference services. In order to provide high quality reference service the librarians need to be able to master this medium. Therefore it is interesting to get an understanding of how librarians actually use the web. The aim of this Master s thesis is to investigate what web search tools are used by public librarians in reference service. Furthermore, the aim is to get an understanding of how the librarians think about those tools and what background factors influence their selection of tools.

The aim of this paper is to highlight issues and potential problems regarding conservation inan exhibition situation. The thesis presents a case study from the Röhsska museum, inGothenburg, where an interior of painted tapestries was currently being conserved andrestored. The study includes general history about the painted tapestries, conservation historyand information about the current treatments.The painted tapestries originates from a former manor [sv: säteri] in Gothenburg calledHökälla and were donated to the Röhsska museum in 1916. The tapestries were a part of themuseum?s permanent exhibition until 1996, when it was dismounted and put in storage.

This essay examines the olfactory reading as a possible way to make sense of a fragmented novel, in this case Sara Stridsberg?s debut Happy Sally (2004). Through close reading, the essay identifies the source of the smells, who perceives it, and how this is portrayed in the text. The smell?s position in the text is understood in relation to Maurice Merleau-Ponty?s phenomenology, where the body, as created in the literary text, is considered as a source of knowledge.

Blåbär är en naturlig källa till antioxidanter, bland annat antocyanin. Antocyanin är ett pigment som bidrar till biomedicinska funktioner som förbättrad syn, förbättrat minne, skydd mot hjärt- och kärlsjukdomar samt andra hälsoeffekter. Idag finns en stor marknad för blåbärsextrakt, där bland annat antocyanin på piller säljs som hälsokostmedel. Försöket syftar till att undersöka om olika våglängdsområden kan öka ackumuleringen av antocyanin hos V. corymbosum av sorterna ´Duke` och ´Legacy`.

Sammanfattning Detta examensarbete utreder hur elektronisk fakturering förhåller sig till traditionell fakturering, samt hur traditionell elektronisk fakturering i form av traditionell Electronic Data Interchange (EDI), kan påverkas av märkspråket XML eller eXtensible Markup Language som det står för. Under utrednings gång har vi stött på vissa motgångar. Motgångarna bestod av att ämnet vi valt att belysa, XML i faktureringssystem, var alldeles för nytt för att genom intervjuer kunna bevisa vår hypotes. XML används helt enkelt inte inom elektronisk fakturering på det sätt vi förutsatt. Vi har därför löst problemet genom att jämföra XML med de traditionella EDI metoderna med hjälp av artikel - och litteratur studier, samt förlitat oss på vad de företag vi intervjuat har gett för svar.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

 With the increases in fuel costs due to the depletion of the world oil reserves and the increase of greenhouse gasses as a consequence to using oil as a fuel many companies are looking to new and innovative ways to power their aircraft. One of these new ways to power an aircraft is using fuel cells powered using hydrogen and oxygen, thus producing nothing but water vapour and small amounts of nitrogen dioxide as well as trace amounts of other emissions. Both Boeing (1) and Politecnico di Torino (2) have shown that it is possible to build an all-electric aircraft powered by fuel cells. Both flights used small, two-seater aircraft and a constant between them was the loss of the co-pilot seat due to weight and lack of space. As this paper will deal with a commercial aircraft a primary concern is the cargo and passenger capacity and whatever impact switching propulsion system has on these.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.