This report describes how to process audio signals in real time with a digital signalprocessor. The digital signal processor used in the thesis and described in the reportare the Blackfin processor ADSP-BF537 from Analog Devices.In the body of this report there is theory of the processor characteristics and thevarious programming languages used. All Experiments that were made on theprocessor are described, these descriptions also help in understanding the annexeswhere the Experiments will be presented. The body of this report also describes theprogram used to do Experiments. Testing the CPU limit was done and the results arepresented to get a good view of what it can handle.

In connection with Henriksdals wastewater treatment plant (WWTP) a smaller plant is situated called Sjöstadsverket where new methods for wastewater treatment are tested and evaluated in different process lines. On one of the lines Experiments with enhanced biological phosphorous removal (EBPR), have been carried out to evaluate if it is a good alternative to traditional chemical phosphorus removal. This thesis evaluates the results from the Experiments conducted during fall 2005.The incoming water from Hammarby Sjöstad consists of only household wastewater, which gives a wastewater with high concentrations of nutrients and organic carbon. This is partly positive, because one of the limiting factors for effective biological phosphorus removal is the lack of easily biodegradable organic carbon. The high concentrations of ammonium and phosphorus demand a high reduction to achieve the requirements of outgoing concentration.To optimize the process Experiments with different recirculations and different aeration techniques have been made.

The payment for produced grain is constantly going down in price. It is important for farmers to become more effective in cultivating more land in a shorter time perspective. At the same time we have to calculate with the risk of getting lowered subsidies from the EU. This is why I would like to find out the possibilities for establishing winter wheat without ploughing. I hope to find a difference in the number of plants due to different soil preparations. With this experiment I expect to find out whether I can establish winter wheat at a lower cost, with the same numbers of plants per square meter.

Incident response plans are faced with new challenges as organisations expands to the cloud, this thesis aims to highlight these challenges and their potential solutions. Our work has focused on managing the incident response in contrast to earlier work that has been focusing on preventing them.As with any development, security is seldom prioritized. Instead the focus are often aimed towards usability and functionality, which means incident response plans are written, implemented, forgotten and finally becomes obsolete. This could result in an organization losing their ability to produce acceptable forensic images, avoid severe downtime, or prevent similar incidents in the future, which are all important parts of incident response.Traditional incident response plans does not address incidents in the cloud. Thus, an absence of guidelines for managing incidents in the cloud becomes apparent.

In this thesis the methane gas potential of three different substrates, two algaes Saccharina latissima and Laminaria digitata and biosludge mixed with paper fiber was studied. This was done by batch Experiments in a laboratory environment to examine the gas production and composition of the produced gas.Biogas production is a complex anaerobic digestion process in which various microorganisms decompose the substrate in steps and at the end produce biogas and a residue. Many factors affect the production of gas, for example the substrate content, temperature and pH in the digester.The analysis of methane potential were divided into two Experiments. In experiment 1 substrates were digested along with inoculum from Växjö waste water treatment plant in a temperature of about 37 ?C.

In this project forging of aluminum alloy Al 6026 T9 has been performed in the temperature range of 400 °C ? 470 °C. The alloy which was in the shape of a cylindrical billet was formed in a press with the aim of analyzing the effect of different forging temperatures and required press load for optimal die filling. The component?s dimensions were later measured and compared to a reference piece.

In Sweden, reduced tillage usually means non-inversion tillage, where primary tillage is carried out using chisel ploughs or disc implements. Primary tillage method is mainly determined by the desired soil loosening and the handling of soil residues. The effect of tillage depth was studied in field Experiments in Skåne, Väderstad, Uppsala, Örebro och Västerås in different crops; spring oilseed rape, spring wheat, winter wheat and spring barley.The Experiments generally had a randomized block design with the treatments mouldboard ploughing, deep chisel ploughing and shallow chisel ploughing, in some cases also shallow discing and no-tillage. In the Experiments the following parameters were determined: seedbed properties, saturated hydraulic conductivity, penetration resistance, number of emerged plants and crop yield (all parameters were not determined in all Experiments. Root growth and draught requirement were determined in two separate studies. There were no significant differences between tillage depths in non-inversion tillage in seedbed properties, plant emergence or root development.

The aim of this undergraduate thesis was to formulate advices regarding the use of field beans, cultivated together with spring wheat, as whole-crop silage in feeding to dairy cows. In the thesis, optimal harvest time of the field bean/spring wheat crop, as well as the feeding value and the fermentation quality, was studied. On the research station at Röbäcksdalen in Umeå field bean/spring wheat (70 % respective 30 % of normal seed rate for the pure crop) and pea/oat (70/30) was grown in field Experiments both 2002 and 2003. The following year, 2004, the pea/oat crop was excluded and instead field bean and spring wheat was cultivated in three different mixed ratios (field bean/spring wheat; 100:0, 70:30, 30:70). Every year the crops were harvested at four different development stages and the green forages were used in ensiling Experiments.

The purpose of this thesis is to analyse studies that evaluate Web search engines. This is done in four categories; the researchers? purpose, the evaluation measurements, the relevance, and the time aspect. Our method is based on a text analysis in which we use the direction of analysis of the content of sixteen evaluation Experiments. Our results indicate fundamental differences in the way the researchers are tackling the problem of evaluation of Web search engines.

AbstractIn this study. I have compared four different schools, two preschools and two compulsory schools. My purpose has been to get a view of, to which extent they use technology in their education.I have also compared boys and girls.The result has been achieved with the aid of questionnaires.It shows that the pedagogues in the preschool, think they use technology every day. They use it in their games, Experiments, food situations and even when the children are dressing them selves.The pedagogues in the compulsory schools work with technology, without reffering to the actual concept. They use the nature and Experiments, to involve the children in technology.One of the schools has a film project.

An excessive input of nutrients to lakes and other water bodies has created a problem with eutrophication in Sweden. Untreated, or partially treated, domestic sewage is a major source for discharge of phosphorus (P), which is the nutrient most frequently responsible for eutrophication of most fresh waters and the Baltic Sea. The waste water can be cleaned by filter materials, which have a high P-retention ability and which after saturation may be used as fertilizers. Four potentially suitable filter materials were tested in batch- and column Experiments in this study. In the batch Experiments, the following materials were shaken with waste water in time series ranging from 5 seconds to 60 minutes: coarse (1-4 mm) and fine (0-2 mm) Polonite® (heated bedrock from Poland); Filtralite® (light expanded clay aggregates with limestone added before burning); water cooled blast furnace slag (BF-slag) and BF-slag mixed with 10% burned limestone.

In two feeding Experiments Bacillus induced priming of plant defense was tested for its effect against the generalist insect pest Spodoptera littoralis. The main hypothesis for the study was that Bacillus induced priming would enable the plant Arabidopsis thaliana to defend itself better against this insect herbivore since this priming seems to involve jasmonic acid, known to be important for plant defense to insects. A secondary objective of the study was to examine if any differences in a primed defense capability could be seen between different natural genetic variants (ecotypes) of A. thaliana reflecting habitat differences in pest pressure. The methods used for plant cultivation and Bacillus inoculation were aimed at reflecting conditions that can be expected in an agricultural cropping system. This meant that all plants were cultivated in soil, and the feeding Experiments were conducted with the plants growing intact in the soil system.

There have been changes in Earth?s climate system on both global and regional scale since the pre-industrial era and some of these changes are due to human activities such as the combustion of fossil fuels. This calls for the development of engines with a higher efficiency and less harmful emissions. One interesting concept is the Homogeneous Charge Compression Ignition (HCCI) engine, which has the advantages of potentially low emissions combined with high efficiency. However, HCCI with diesel fuel requires a relatively long fuel/air mixing time to ensure a "homogenous" charge.

This bachelor thesis has the purpose to visualize and document the air movementsprovided by different ventilation principles in an operating theatre. The visualizationwill be made as simple as possible in a physical model. The model and thedocumentation should be able to use in educational purposes.The study is based on the two most common systems for airflow, currently used inoperating theatres. The first principle is displacement ventilation in which the air issupplied at low velocity along the floor. The second principle is vertical parallel laminarairflow in which the air is compressed like a piston from ceiling to the floor.A review of literature resulted in the choice of size, design, and scale factor for themodel, as well as choices of ventilation principles and airflows.

This bachelor thesis has the purpose to visualize and document the air movementsprovided by different ventilation principles in an operating theatre. The visualizationwill be made as simple as possible in a physical model. The model and thedocumentation should be able to use in educational purposes.The study is based on the two most common systems for airflow, currently used inoperating theatres. The first principle is displacement ventilation in which the air issupplied at low velocity along the floor. The second principle is vertical parallel laminarairflow in which the air is compressed like a piston from ceiling to the floor.A review of literature resulted in the choice of size, design, and scale factor for themodel, as well as choices of ventilation principles and airflows.