AbstractMI stands for Motivational Interviewing, the Swedish translation of MI is Motiverande Samtal. Adolescence is a period in life when challenges are encountered and pivotal choices are being made. It is during this period adolescents form their lifestyle, which have an impact for their health for the rest of their life. MI has shown to be an effective and appropriate method for school nurses within school health care, to utilize in approaching by adolescents with risk behavior. This is because it gives adolescence to take responsibility and empowers them to make decisions regarding lifestyle-changes.

AbstractMI stands for Motivational Interviewing, the Swedish translation of MI is Motiverande Samtal. Adolescence is a period in life when challenges are encountered and pivotal choices are being made. It is during this period adolescents form their lifestyle, which have an impact for their health for the rest of their life. MI has shown to be an effective and appropriate method for school nurses within school health care, to utilize in approaching by adolescents with risk behavior. This is because it gives adolescence to take responsibility and empowers them to make decisions regarding lifestyle-changes.

In this work, a method was developed and evaluated for calculating the life of welds under the influence of fatigue loads from a vibration environment. Typically, a shaker table is used for testing a component against vibration loads. The shaker table creates a vibration environment that is defined in the frequency domain by a power spectrum.Similarly, a virtual vibration table can be used to calculate the same type of load environment, which can then be used to calculate the expected lifetime. The benefit of this method is that it can be used in design, as well as in simulation of tests before physical verification tests are carried out.Today there are methods for calculating fatigue life of non-welded base material, but since many components contain welded joints, there is a need to apply this method to those types as well. To achieve this, the thesis combines two different areas, which together provide a method for fatigue assessment of welds using a virtual shaker table.The methodology is carried out by modeling the component, and its welded joints, in a finite element program.

Induction motors, often referred to as the workhorse of the industry, play an important role in production today. Therefore, it's important to diagnose any faulty induction motor prior to failure to avoid costly and time consuming production stops.This thesis compares methods for diagnosing induction motors in operation, MCSA, Park's vector approach and the standard method used by Swedish industries today. By simulating broken rotor bars and short-circuit in one of the windings, each method is tested and the results are compared using matlab.The results need further verification due to uncertainties of the condition of the test motor, even though the experiment gives a hint of the different advantages of each method. A combination of the methods should be able to tell if the motor needs further examination..

In each classroom there is a teacher with good intentions wanting what´s best for their pupils. But grades and tests in mathematics from 2009 in Sweden shows there is a crack between the subject being taught and the learning child. The purpose with this research is to find an understanding from a teaching and learning perspective of which teaching method is more suitable for teaching and learning mathematics by doing a comparison between two methods. The main question is:What are the advantages and disadvantages of the traditional and the laboratory method of teaching, supported by the two keywords teaching method and learning?This C-paper is based on a qualitative research aiming to gather an in-depth understanding of human behavior.

In this master thesis work, a new method called MultiScat, is compared with the conventional method with alfa-correction, for computing concentrations from intensities in X-ray spectrometric analysis. The conventional model is a linear model, which only takes the photoelectric effect into consideration. It doesn't consider Rayleigh and Compton scattering even though it has a great impact on the measured intensities. Here MultiScat differs a lot. MultiScat is based on a solution of the Boltzmann transport equation.

One area of responsibility for a nurse is to alleviate suffering. Gender research has shown that there are differences between men and women. The aim of this literary study has been to elucidate men and women’s experience and expression of pain and to examine to what extent sex and gender influence which treatment the patient receive. The study is based on 21 scientific articles from the databases PubMed and Cinahl. The result shows that women experience and express more pain than men, postoperative and experimental. It is however not possible to draw any general conclusions in terms of the need for men and women to be treated in different ways.

The global Positioning System (GPS) provides location and time information as long as there are unobstructed lines of sight to four or more GPS satellites. However, when this is not the case the signal may be inaccurate or sometimes even completely blocked. In these situations the Inertial Navigation System (INS) is an appropriate choice for positioning.  An INS has already been proposed in a previous thesis by Erik Andersson and the objective of this thesis is to fuse the GPS with the INS in a proper way. A part of this project is to decide the reliability of the GPS.Three methods for GPS reliability detection have been proposed. One method based on the statistical properties of each of the separate systems, and two methods based on the statistical properties of the residuals between the GPS and INS.

There have been, in some rare cases, difficulties with clamping of inserts with U-holesin their tool holder. According to the complaints, the inserts could not be properlyclamped or could fracture when clamped. A study has shown that variations inclamping behaviour are mainly depending by the position of the screw hole in the toolholder and the centering of the screw hole in the insert.The focus of this project has been the centering of screw hole in insert. It has beenshown that the screw holes are not always enough centered in the insert. Theproblem may occur after a certain step in the production, i.e.

Many product launches are postponed today, however very little research regarding to customer responses to such events has been carried out. The purpose of this paper is to investigate how people react to a postponed product launch. An experimental study of responses to a postponed launch of a mobile phone, a mineral water and a music album is used to investigate customer reactions. The respondents exposed to the postponed launch showed a higher value of reactance. This reactance affects the attitude, purchase intention and perceived quality of the product in a negative way.

Successful broiler production in hot climates requires knowledge of how birds are affected by heat stress. It is important with access to water and good ventilation to facilitate coping with the heat. It may be useful to reduce the consumption of feed during the hottest hours of the days, which together with a few hours of extra light available could improve both productivity and animal welfare. The vision in birds is superior to that of humans and most other mammals. Continuous light and light with low intensity can cause eye injuries, affect the eye development in young chicken negatively, as well as provide increased incidence of foot pad lesions. Access to light affects the production but also the welfare of birds.

The purpose of this essay is to discuss and compare different ways of learning new words and expanding your vocabulary in a foreign language. This is done by an examination of relevant literature and available research, as well as by an empirical study with two upper secondary school classes, in which two different methods are put to the test: one traditional method of the kind that is found to be most common in second language acquisition, and one designed to take existing research into account. The results show that, although effective in the initial stages of acquisition, the traditional method, where words are learned in isolation and via translation to L1, results in a very limited form of knowledge. A big part of the words acquired via this method is also forgotten soon afterwards. The other method, where words were learned and tested in its proper context, was found to result in a broader form of vocabulary knowledge, covering more aspects, and that remained over time.

 This study examines the way Swedish students in Upper Secondary School respond to two excerpts from a classic Swedish novel. The paper?s aim is both to give an overview over some of the theoretical concepts concerning the field of reader-response criticism, and to describe and analyse what the students experience in their first meeting with an older text. The background to my interest is the many studies showing that young readers regard reading of fiction in school as boring. By using the method of written reading responses I want to contribute to a deeper understanding of how an older text can be received, understood and engage its readers.

Background: Triage is the sorting of patients according to the severity of medical assessment. Triage has a long history of use in Anglo-Saxon countries but is a fairly new method in Sweden. Researchers have described the Manchester triage group method (MTS) and a literature review of the concept; working contentment and competence focusing on triage. Aim: The ambition with this study was to describe a number of triage nurses working conditions. The research questions were; working with MTS- does it bring work contentment? What kind of competence is needed? Method: Data was collected from 74 triage nurses by a questionnaire containing 37 questions and two questions provided the nurses the opportunities to describe their triage experiences.

Voltage sag indices are a way of quantifying the performance of the power supply, as far as voltage sags are concerned. Indices can be defined for individual events, for individual sites, and for a whole system. A standard method for single-event methods is part of IEC standard 61000-4-30.This thesis emphasizes the importance of voltage sag indices and different methods for calculating three-phase voltage sag characteristics. Three-phase events measured in a medium network voltage over period of one month were analyzed, results examined and statistically evaluated. An algorithm for calculating voltage sag characteristics and indices was created in Matlab.