This thesis project focuses on the need for better tools for analyzing competition for forest fuels in Sweden, in particular how policy measures may influence the market and involved actors in different regions of Sweden. Raw materials from the forest have for long constituted important inputs in the Swedish forest industry. Today some of these raw materials are increasingly used as inputs also in bioenergy production, largely driven by bioenergy promoting policies, and there are signs of increased competition for forest fuels which may have various and uncertain effects on the industries in question. The thesis project explores the possibilities to adapt previously used forest sector equilibrium models into a new model suitable for analysis of Swedish forest fuel markets, called the Swedish Forest Sector Trade Model (SFSTM). The approach takes into account regional differences in supply and demand for 23 types of products produced and/or used by eight types of producers, plus consumers, in five different regions (four Swedish and one international).

In this work, a method was developed and evaluated for calculating the life of welds under the influence of fatigue loads from a vibration environment. Typically, a shaker table is used for testing a component against vibration loads. The shaker table creates a vibration environment that is defined in the frequency domain by a power spectrum.Similarly, a virtual vibration table can be used to calculate the same type of load environment, which can then be used to calculate the expected lifetime. The benefit of this method is that it can be used in design, as well as in simulation of tests before physical verification tests are carried out.Today there are methods for calculating fatigue life of non-welded base material, but since many components contain welded joints, there is a need to apply this method to those types as well. To achieve this, the thesis combines two different areas, which together provide a method for fatigue assessment of welds using a virtual shaker table.The methodology is carried out by modeling the component, and its welded joints, in a finite element program.

In the thesis we have shown that it is possible with current technology, to buildneighborhoods that are largely self-sufficient. We have obtained some information aboutongoing work in the field of energy efficient buildings and active house which we have usedto develop a model. The feasibility study for Ranagård we have e.g been forced tofollow laws on groundwater covered, resulting in the construction of basements for singlefamilyhome is not possible. The model that we have built up overtime has been the central part of the work. The model illustrates very well what an activehouse neighborhood means and potential of such an area.

The gas turbines in the Swedish secondary reserve are reaching the end of their technical lifetime, hence alternative solutions need to be considered. One of the solutions thought to have the greatest potential is the use of so called consumptionreduction. By entering contracts with large consumers, agreements are made to reduce consumption in the event of major disturbances in the power system and thus being used as a secondary reserve. This thesis investigates the feasibility of consumption reduction as part of the secondary reserve. This has been achieved by developing a requirement specification for the disturbance reserve and by studying the technical and economic potential for consumption reduction among a range of consumers.The technical potential for consumption reduction that fulfils the requirements for participating in the secondary reserve are on average 750 MW in SE 3 and 98 MW in SE 4.

Our greatest interest within crop farming is to grow sugarbeets, that?s why we want to write about something new in this sector. We heard that a new concept had come to Sweden so we wanted to find out everything about this machine. This new technique was a self-propelled cleaning loader for sugarbeets. This machine is supposed to replace a loader and a cleaning machine when the sugarbeets is going to be loaded, cleaned and delivered to the sugerbeet factory. The cleaning loader picks up the sugarbeets with rollers from the pile, which is placed close to the road.

The aim of this study is to increase understanding about addiction recovery. More specifically, we want to know what people who have had problems with alcohol and/or other drugs perceive as helpful and important for their recovery process and how we can understand this process.The study was conducted by means of qualitative semi-structured interviews with four people who have had alcohol and/or other drug problems. The analysis is based on a transtheoretical model of change from addictive behaviours, coping, interactionist theories and also a recovery perspective, inspired by research on recovery from mental illness . Main findings are that recovery from addiction can be understood as an individual process that takes place in a social context and can follow expected phases, although there are large individual differences in the process. Through the recovery process it has been of importance to the participants in the study to redefine themselves and their problems, get support from others, find ways to cope with their problems, get involved in meaningful activities and to expand their social roles.

AbstractIn this thesis we aim to extend the current theories about a concept called persona. A persona is a model of a user, mostly based on qualitative research and made with such accuracy that it to some extent can be used as a replacement of a real user in a development process and as a communicative tool. We will present a way of constructing this persona without meeting the actual users and follow up with interviews from the organization using them. This will lead to a model over the process of introducing personas as a concept in an organization,previously not familiar with the concept. The model is adapted to also work for projects and organizations where the concept is already known..

Context: During the 21st century several alarming reports have been published that deals with the depletion and pollutant of the earth by human interference. The earth is an ending resource and so are the mountains and bedrocks which are continuously mined in order to harvest its minerals. The idea behind Urban Mining is to (re)invent processes enabling further purpose for materials both from old deposits and new products providing secondary raw materials and energy. This thesis aims to investigate the challenges and opportunities of how firms and organizations can and will be able to strike a better balance between product-/service systems, economic growth and environmental stewardship in the context of Urban Mining as an approach. With the innovation of processes, technology, business- planning and creation in focus.Objective: How to future proof a business model for Urban Mining by the usage of business model design.Method: This thesis will be conducted using a case study approach, meaning that it will incorporate qualitative, exploratory and descriptive characteristics - aiming towards enabling both applied and fundamental research.Results: The result evaluates the business model element differences between traditional C&D industry and Urban Mining industry.

SMC is in the process of developing a micro simulation model. The existing micro simulation model developed at Cornell University for US data, CorSim, is one of the fundamental parts for the new micro simulation at SMC. To develop the Swedish model, Swedish data on all individuals in Sweden during 11 years are also available. These data are organized in a database. This paper describes the process of rebuilding the database to a more useful structure.

This thesis evaluates the user board of the elememtary school in Veberöd, Sweden. In this process an evaluation model is developed. The model itself gets evaluated in a meta-evaluation to improve the model for future use.The starting point of the evaluation is the deliberative democracy theory. Although Sweden is a representative democracy an official desire exists to have a democracy with deliberative qualities. The evaluation model is constructed to fit this context and is therefore, not only, set out from classical goal-based evaluation but also from deliberative democratic evaluation.

AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.

The credit rating industry is a complex and fascinating industry. Its history stretches back more than 150 years and has gradually increased in importance. During its history the dynamics of the industry have changed. The extended-principal-agent model was developed by synthesizing different principal-agent-relationships into one model. This model provides a holistic understanding of the credit rating industry and illustrates the interdependence between the different relationships.

Intangible feelings of sorrow and grief, caused by events like separation, death, loss and trauma, all leave some kind of traces in us and they play an important role in our development. The individualistic society here in Sweden has shaped us to keep our feelings inside and at bay; since our childhood we have learnt that showing emotions like tears, sorrow and sadness are signs of weakness and can make others and yourself feel uncomfortable. With the starting point from my own experience and understanding of how we can deal and handle grief, I take a closer look on how jewelry, objects and rituals can be of importance in a grieving process and our lack of visual outer display of grief in today?s society. Through Sara Ahmeds theory I found a new possible way of understanding emotions and how they shape us.

Calculations of net present value are based on a discount rate, which requires knowledge about the company?s cost of debt. A common way to do this is by observing the company?s credit rating, when no credit rating is given it?s possible to use a synthetic rating model based on quantitative data to estimate a credit rating. Thus, the aim of this study is to increase the understanding of which quantitative data, in terms of key figures, that can be used to explain the given credit ratings for companies from the Nordic countries.In developing the model, key figures found significant in previous studies are being tested for whether or not they are applicable for companies from the Nordic countries.

AimThe purpose of this study has been to help Åtvidabergs FF to find development opportunities by reviewing the internal communication and decision making process within the organization. In this study we have used two models, Johari window and Administrative man.Our study has two main questions. The questions at issues are:? Can Åtvidabergs FF with help of the communication model Johari window identify how the internal communication can improve?? Can Åtvidabergs FF use the Administrative man as a decision model?o Will the use of the model Administrative man lead to better decisions will be made?MethodWe have made a qualitative case study in a positivistic spirit. Data has been collected through half structured interviews.