On today?s competitive market, it is difficult to achieve profitability trough high prices on manufactured products. Profitability must be obtained through low manufacturing costs, high quality and short lead times. One of the companies on the market is Sandvik Coromant, manufacturer of tools and chips for metal cutting. This master thesis investigates the methods of manufacturing for boring bars at the manufacturing unit GVH4 at Sandvik Coromant in Gimo, Sweden.

Disinfection methods for drinking-water produced at the two water works of Stockholm Water Co are compared in this study. Three different nethods are compared; disinfection with chlorine gas, disinfection with sodium hypochlorite and disinfection with UV-light and monochloramine. The method used is Life cycle assessment, LCA. LCA is defined as the compilation and evaluation of the inputs, outputs and potential environmental impact of a product system shroughout its life cycle. The environmental burden is compared for the three different disinfection methods.

The freshwater pearl mussel (Margaritifera margaritifera) is a large freshwater mussel. Because of its sensitivity to human impact, such as eutrophication, acidification and alterations of hydromorphology, the species is considered as a robust indicator of stream water quality and biodiversity. Moreover, due to the species complex life cycle, including a larval stage on the gills of salmon and trout, and sensitivity of early life stages, regeneration is often used as an indicator. The freshwater pearl mussel is also used in the expert judgement of status classification of benthic invertebrates according to the European Water Framework Directive. The purpose of this study was to gain a deeper understanding of the freshwater pearl mussel as an indicator for Swedish streams. It was made with two types of association analyses.

The purpose of this work is to design and construct a device able to measure the mechanical attrition of oxygen carrier particles. Those particles are used in chemical looping combustion and in the present situation there is a lack of knowledge in how the attrition process work and in which extension. To find already tested solutions trying to answering this problem a literature study wascarried out and the best solution found was the so called Grace-Davison Jet-Cup method. This method is supposed to emulate the attrition caused by a cyclone separator and its advantages are that it is possible to use small test amounts, 5-10 g, and a thirty minutes long test will be enough to acquire useable results. An device was designed based on the Jet-Cup method with some slight modifications.

Rapporten beskriver ett utredningsuppdrag för Lantmännen Unibake, Korvbrödsbagarn, där lösningar för en automatiserad iläggning av påsar i kartonger skall ersätta den nuvarande manuella hanteringen.Metoden för att hitta en passande lösning genomfördes enligt PDCA-cykeln (Plan-Do-Check-Act), där fyra olika faser går igenom för att få en förståelse för nuläget och önskemål, utforska tillgängliga alternativ genom kontakt med agenter för maskinföretag, utvärdering av lösningsförslag och till sist en slutsats och förslag till fortsatt arbete..

This report is a bachelor thesis work within the field of Product Development and is also an assignment for Thule Sweden. The work has been performed by Niclas Tjäderborn and Christian Holm, students at the Mechanical Engineering Program with major in Product Development and Industrial Design at Jönköping School of Engineering during spring the semester of 2009.The thesis work concerned the development of a new wheel holder for bike carrier for Thule Sweden. The background to the project was that the initiator wanted a more user friendly wheel holder with better design than those available on the market. The wheel holder is able to be implemented on one or several of Thule?s current wheel holders.

Oestrus in dairy cattle has changed over the last decades; the intensity of oestrus has declined and the duration decreased. Several studies have shown that not all dairy cows stand to be mounted, and that oestrus expression in many cases may be characterized by other behaviours. The aim of this study was to investigate oestrus behaviour in a herd of todays? high producing dairy cattle. The study was carried out at Jälla naturbruksgymnasium in Uppsala during one week in January 2011.

During the period 2009-2013, investments in the Swedish national grid increase by a factor of ten compared to previous years. In order to fulfil their mission to manage the national grid in a safe, efficient and environmentally sound way, Svenska Kraftnät (Swedish National Grid) needs to take all these perspectives into account while planning new investments. To compare and relate perspectives of technology, economy and environment the same yard stick must be used. That yard stick is commonly money. A problem arises however as environmental issues are difficult to price.The purpose of this master?s degree project was to develop a tool for evaluation of environmental impact related to investments in the Swedish national grid.

The purpose of this work is to design and construct a device able to measure the mechanical attrition of oxygen carrier particles. Those particles are used in chemical looping combustion and in the present situation there is a lack of knowledge in how the attrition process work and in which extension. To find already tested solutions trying to answering this problem a literature study wascarried out and the best solution found was the so called Grace-Davison Jet-Cup method. This method is supposed to emulate the attrition caused by a cyclone separator and its advantages are that it is possible to use small test amounts, 5-10 g, and a thirty minutes long test will be enough to acquire useable results. An device was designed based on the Jet-Cup method with some slight modifications.

This report deals with RFID systems and how to detect nearby tags with the Mifare standard using only a microcontroller and an antenna circuit.The aim was to investigate whether there was any possibility to continuously search for a nearby tag for a system operated with batteries without compromising   the lifespan of the battery. At this time the system would take too long time to wake up and look for a tag to give a satisfactory battery lifespan, which should be done a couple of times every second.The report has two issues, namely:Is it possible to direct the microprocessor to detect and identify a nearby tag after the Mifare standard?What hardware is required for this to be possible?As the research method to provide answers to the above questions an action research was used. This approach has meant that the group worked on information retrieval, examined existing solutions, tested their own solutions and documented the results.The group examined an existing solution that can search for nearby tags with minimal energy consumption. An antenna circuit was built that was connected to the processor.

Författarna har haft ett samarbete med Panduro Hobby i samband med deras årliga miljökampanj. Syftet med examensarbetet har varit att med hjälp av befintliga produktutvecklingsprocesser och livscykelanalyser (LCA) ta fram en hållbar textil produkt med växtfärgning. Tanken var att konsumenter sedan själva skall kunna ta fram och växtfärga denna hållbara textilprodukt. Miljömedvetenhet och hållbarhet inom textilindustrin är ett aktuellt ämne. Trots det saknar dagens konsumenter förståelse för textilindustrins påverkan på miljön och har bristande kunskap om textila material för att kunna göra miljövänliga val ute i handeln.

Today dairy farmers in Sweden are obligated to have lights turned on during night time in addition to the mandatory daylight inlet. This presents a cost for the production but many argue that it can be economically beneficial, especially in loose housing of dairy cows. In loose housing and even more so in herds with automatic milking, well functioning cow traffic during all hours of the day is crucial to optimise production. In order to keep the cow traffic flowing, lights may be an important management tool. It is also perceived among farmers with tied up stall that night light decreases the incidents of cows accidental stepping on their own or neighbours udders.

Aim: Culture exists in every organization, whether you actively work with it or not. Old cultures often carry traditions and are hard to change. The purpose of this thesis is to describe Gävle Galvan from an organizational point of view and also to investigate the culture from a gender point of view.Method: The thesis is written with a qualitative and narrative approach. I have taken part in three person?s stories through interviews and thereby created picture of their everyday work on Gävle Galvan.

Cykling f?r transport har potential att vara en del av h?llbara st?der och samh?llen genom att bidra till h?llbara transporter och fr?mja fysisk aktivitet. F?r att ?ka transportcyklandet arbetar planeringsakt?rer med att vidareutveckla utvalda cykelv?gar till s? kallade supercykelv?gar. Vidareutvecklingen best?r dels av upprustning av cykelv?garnas standard och av att synligg?ra dem genom gestaltning bland annat i form av enhetlig v?gvisning.

This study sheds light on the firm-lifecycle and the impact of leadership and how itdevelops negatively when the entrepreneurial firm becomes administrative andmanagerial. The ambivalent fact is that the firm, when growing in size, need to becomemore managerial, though without undermining the previously entrepreneurial mind-setthat pervade the organization. The term corporate entrepreneurship has emerged andcomprises that the firm can continue to be entrepreneurial in the managerial stage. Thatis to resume the firm?s work to keep innovative.