Sökresultat:
355 Uppsatser om Expanded metal - Sida 5 av 24
Låsning till spolkarslock
Since 2007, I´ve been working in the steel industry in a place called ?SSAB?. That?s why itseemed right to contact them for this thesis.The SSAB concern is global, but SSAB Sweden involves raw steel producing in Luleå, heavyplate producing in Oxelösund, and sheet metal producing in Borlänge..
Fördjupad miljöriskbedömning av förorenade markekologiska system. : Integrering av kemisk, toxikologisk och ekologisk information.
AbstractThe research project Liberation, supported by the European Commission under the Environment and Sustainable Development Programme (Fifth RTD Framework Programme) aimed at developing a decision support system for ecological risk assessment of contaminated sites has proposed a tiered system including the triad method. This method integrates contaminant chemistry and bioavailability analyses with observed ecotoxicological effects in soil and groundwater. In this study the triad method was used to perform a risk characterization of a former surface treatment and metal industry, now used for the student union buildings of the Mälardalen University in Eskilstuna, Sweden. On the site, high concentrations of copper, zinc and nickel have been detected in the soil in a preliminary investigation of contaminant levels with XRF. For performing the risk assessment of the site according to the triad method, contaminant bioavailability, soil metal concentrations and soil toxicity were determined and an ecological assessment was carried out on four selected soil samples (one reference soil and three samples with low (B), medium (C) and high (D) contaminant levels). Contaminant bioavailability was measured through leaching (ISO TC 190/S7) and biouptake tests (DGT).
Separeringsmodul
In cooperation with the Gislaved company Lerocon AB [1], a separation module wasdesigned as a further supplement to the Module System. The aim of theprojectimplementation was that the separation module could be flexible enough to feed themetal pieces, screws, nuts and other items with large variations of size, appearance andmaterial composition. The module should also be cost effective to manufacture.A separation module is a design which is ment to streamline the work in industries withautomation of the lineoperations. The module feeds the details such as screws, nuts, washersand pieces of metal in a continuous flow in which traps separate the details from each other.Traps may vary depending on the purpose and of the details that are fed. Perhaps it isimportant for the user that the detail-orientation is right after the separation module, whichmeans that all the pieces witch aren´t are fed back in return.For companies and industries in lineoperations that can be made more efficient withautomation, are production flow an important watchword.
Mineraliska material som reaktiva filter för avskiljning av tungmetaller från dagvatten
Highly polluted urban storm water from e.g. highways can contain large amounts of heavy metals that may cause harm if they are discharged into recipients. To remove the heavy metals a possible low-cost method that does not require much maintenance, could be the use of reactive filters with filter materials consisting of industrial residues or other cheap mineral based materials. Dissolved metal ions are removed by reactive filters through the processes of ions binding to active sites on the surface of the filter materials, or by formation of insoluble precipitates.The ability of CaO-treated granulated blast-furnace slag, iron oxide coated sand, olivine and nepheline to remove seven heavy metals (Cr, Cd, Cu, Ni, Zn, Pb and Hg) from urban storm water was studied. Initially batch experiments were performed where the effect of pH, dissolved organic carbon (DOC) and dissolved ions on the adsorption efficiency was studied.
Undersökning av svetsegenskaper för svetsning med rörtråd kontra homogen tråd
Welding is a common method for joining of metal or plastic construction parts. This report describes several different weld methods in general terms. The report focuses on the GMAW method, specifically MAG welding.A case study has also been performed for the company Wenmec. The task received from the company was to compare the mechanical properties of joints welded with the tube electrode called Nittetsu SM-3A and joints welded with the homogenous electrode called ESAB Aristorod 12.63. Both types of weld joint were welded with the MAG method with an Argon based shielding gas with 18% CO2.
Geokemin inom osorterade cirklar : Analys av tungmetallers distribution inom jordprofiler tagna från Abiskoområdet, nordvästra Sverige
The Arctic region appears as a pristine remote environment, yet there is increasing evidence that it is greatly impacted by pollution such as lead (Pb) and mercury (Hg). In this environment deposition of Hg has increased threefold since the last industrial revolution. In this study five cryosolic soil profiles within non-sorted circles (NSC) in the Abisko region, northwest of Sweden, has been analyzed to improve our understanding regarding how pollutants are distributed within such type of soil. The soil samples have been analyzed with the use of X-ray fluorescence analysis (XRF), for the measurements of the total concentrations of e.g. lead (Pb) and zirconium (Zr).
Avsättningsmöjligheter för slaggrus från avfallsförbränning vid Åmotfors Energi
The incineration of waste is steadily increasing in Sweden and so is the production ofashes. The bottom ash has for many years been used as construction material inlandfills. Now many of the nation's landfills are closed and there is a great need to findanother beneficial use for the ash. Bottom ash is a gravel-like material and with itsmaterial properties it can replace natural gravel in parts of roads and surfaceconstructions. Today this use is only approved within landfill areas where leachate iscollected and checked.
Järnets introduktion i Skandinavien : -I ett arkeologiskt perspektiv
The views on and the knowledge of the introduction of iron to Scandinavia have change by the history of archaeology. The results and discussions are put in the context of time and how that time is reflected in their work and texts. This limits that scholars put up to orientate themselves conceal the complex reality. The limits are changing all the time and is dependent of time and person..
Avsättningsmöjligheter för slaggrus från avfallsförbränning vid Åmotfors Energi
The incineration of waste is steadily increasing in Sweden and so is the production of ashes. The bottom ash has for many years been used as construction material in
landfills. Now many of the nation's landfills are closed and there is a great need to find another beneficial use for the ash. Bottom ash is a gravel-like material and with its material properties it can replace natural gravel in parts of roads and surface constructions. Today this use is only approved within landfill areas where leachate is
collected and checked.
"Resan till London" : Språk, struktur och kvalitet i fyra narrativa elevtexter i årskurs 6
The aim of the study was to investigate how four pupils in sixth grade use language when writing narrative texts, examined in relation to the typical structure and linguistic features of a narrative text. Another aim was to explore the similarities and differences between texts which received an A or B grade and texts with a D or E grade. The pupils? texts are analysed from a systemic-functional perspective on language and on the basis of the typical structure and language of a narrative text, with the focus on expressions of time, processes, descriptions and nominal groups (cf. Johansson & Sandell Ring 2012).
Användning av konst i samspel med landskapsarkitektur : med utgångspunkt i Gunilla Bandolins och Olafur Eliassons verk
The relationship between landscape - public - art and whatoccurs and happens in between is what this paper casts light on. The essay intends to investigate whether there is any boundary between landscape architecture and art. How does this border looks like? Can art in the context of landscape architechture lead to a closer cross-border collaboration between landscapearchitects,artists and the public, to create attractive and/or functional outdoor environments. The place where the meeting can take place is outdoors where the landscape architect works, in the public environment and around the public art.
Parametriserad 3D-modell av cyklon : Parametrisering av en 3D-modell av ett cyklonfilter i SolidWorks för snabb framtagning av nya konstruktioner till Outotec Skellefteå
This bachelor thesis project has been executed at Outotec Sweden AB in Skellefteå. Outotecs main business focus is selling mineral and metal processing technologies. A rest product from the metal process is particle-polluted gas and cyclone designs are today the most commonly used abatement device for particle control. A cyclone provides a simple design with high efficiency particle percolation by using air streams.The purpose of this work is to reduce the time it takes create new cyclone designs in Outotecs projects. An extensive construction work is needed for every new cyclone order due to new designs.
Queryexpansion med böjningsvarianter och uppbrytning av sammansättningar
The purpose of this thesis is to examine the performance of queries that are expanded by 1 inflections, 2 compound splitting and 3 inflections and compound splitting combined. For compound splitting, the morphological analyser SWETWOL was used. Queries were executed in the Query Performance Analyser, QPA, containing the InQuery system. Query terms were selected from 29 topics, all of whom containing at least one compound word. Both the queries and the documents were in Swedish.
Provtagning av trädkärnor för att bedöma föroreningsgraden av klorerade lösningsmedel i grundvatten
Chlorinated aliphatic hydrocarbons (CAH´s) were used widely within dry cleaning facilities and for metal degreasing until their toxicity was discovered. PCE is still used as dry cleaning liquid. Today CAH´s are found in soil environment at places where they have been used in the past. The CAH-concentration in trees growing on contaminated land has quite recently received attention as a cheap and effective way of assessing the extent of a CAH-contamination. The method has however, not been put into use in Sweden.The aim of the study has been to investigate whether the CAH-concentration in tree cores could be used to delineate the spread of CAH in a soil environment under Swedish conditions in different seasons.
Too Fast for Love : En maskulinitetsstudie av Glam metal under 1980-talet
Syftet med vårt arbete var att få en inblick i hur verksamma lärare i förskoleklass arbetar genusmedvetet med undervisningens innehåll i praktiken. För att få reda hur det ser ut i verksamheten genomförde vi en kvalitativ studie där vi använde oss av semistrukturerade intervjuer. Vi intervjuade tio lärare med varierade åldrar på sex olika skolor. Den genusmedvetenhet som lärarna lyfte fram kan knytas till följande kategorier: se individen, synliggöra och diskutera skillnader, bryta könsmönster, arbeta könsneutralt, lärarnas tankemönster samt tillvaron utanför förskoleklassen. Vår slutsats blev att lärare behöver få mer kunskap och fortbildning i form av en teoretisk grund som kan hjälpa att sammanfoga teori och praktik när det gäller att kunna arbeta mer genusmedvetet i verksamheten..