Sökresultat:
3322 Uppsatser om Existing building - Sida 56 av 222
Utformning av riktlinjer för trafiksäkerhet i mindre stadscentrum : fallstudier i Bollnäs och Sandviken
Several cities have implemented various projects to improve traffic safety in city centers.During 1970s and 1980s the city centers changed as the suburbs grew and large shopping centers were located outside the center. At the same time, several projects were initiated with construction of pedestrian streets and restriction of traffic in the center. In year 1994,shared-used areas were introduced in Sweden and these areas are often used in center environments.In Sweden, municipalities are responsible for integrating security in public places and in comprehensive plans and detailed development plans. The National Board of Housing,Building and Planning is the authority for administrating planning issues and develop general guidance about planning. Traffic is one of their key issues, although today there are no concrete guidelines from the National Board of Housing, Building and Planningfor the design of traffic safety in city centers.Traffic safety in city centers affects many people because the city center is a public place.It is therefore important that there are current guidelines available that are helpful for changes and improvements in traffic safety in the city center.The purpose of this report is to formulate guidelines for planning city centers from a traffic safety perspective.
Sortimentsbestämning på servicelager hos Siemens Building
Technologies
Siemens Building Technologies (SBT) tillhandahåller och underhåller byggnadsautomationslösningar. För att serva deras underhållsorganisation har de 51 stycken servicelager runt om i landet. På dessa lager lagerhålls artiklar som behövs för att uppfylla deras serviceavtal gentemot kund. Företaget anser att det finns för mycket kapital bundet i dessa lager och att deras omsättningshastigheter är för låga. Examensarbetets syfte är att utvärdera SBT:s lagerstruktur och utarbeta ett arbetssätt som företaget kan använda vid bestämning av sortiment och lagernivåer för att sänka deras totala lagerkostnad.
Effekter av ökad internationell handel på kvinnor kontra män
In the light of ever increasing international trade around the globe, affecting men and women in all countries, it is surprising that so little attention is given its gender effects. The effects of trade are said to be gender neutral, but could potentially act reinforcing on the existing gender patterns in a society. The aim of this thesis is to examine whether the implications for men and women in relation to trade liberalization can be found to differ. By stylizing some differences between men and women, this is done by examining the theoretical implications mainly via the Heckscher-Ohlin model and through a Beckerian approach. The implications found are then compared with the findings in existing empirical work.
Miljöteknisk undersökning enligt MIFO : en studie på fastigheten Bodsjölandet 1:14 avseende den nedlagda tjärfabriken i Grötingen
During 40 years of industrial production, from the end of the 1890?s until the end of 1930?s, coal and wood distillation products were manufactured in AB Carbo?s tar factory along the River Gimån in Grötingen, in the county of Jämtland, Sweden. In accordance with the Swedish Environmental Protection Agency?s Methods for Inventories of contaminated sites, MIFO, the site in Grötingen has been identified as a potentially contaminated site. In order to determine whether toxic substances pose a threat to human health and ecological systems in the area, there was a need to investigate the presence of contaminants, their levels and potential for migration.
En ny modell för att stärka kommunikation och samverkan mellan universitet och näringsliv
As a result of today`s competitive situation, the demand on the rapid development of research has increased. Both universities and companies are realizing the importance of a functioning and well-developed cooperation. A close collaboration and communication between universities and the business community has in many studies been shown to be very important for business development and knowledge transfer. The purose was to examine how communication and collaboration between universities and industry can be developed and strenghthen on the basis of innovative thinking. In order to initially identify the perceived problems the authors studied how communication and cooperation manifests itslelf today between the two parties, what does not work and how the existing tools for communication and collaboration look like today.
Från Värendsvallen till Arenastaden : En studie om Smålandspostens nyhetsrapportering angående uppförandet av fotbolls- och ishockeyarenorna på Värendsvallen och Arenastaden i Växjö
The following essay is a study of the theatre-play Min Arm, a translation and performance by Per Lasson for Fria Teatern in Stockholm 2009-2010. Actor, director and playwright Tim Crouch wrote the original script My Arm in English in 2003.With basis in intermedial theory, as defined by Jörgen Bruhn, as well as Hans-Thies Lehmann?s theory on post-dramatic theatre this study investigates the meaning-building processes in Min Arm as a theatrical performance. Concepts of the difference between stage play and performance text are borrowed from and inspired mainly by Eli Rozik?s Generating Theatre Meaning.
Avfallshantering på byggarbetsplatser : Potential för en miljöeffektiv avfallshantering
This thesis concerns waste management on construction sites and was conducted on behalf of ICA Fastigheter.Areas of concern:How can an environmentally-efficient waste management system on construction sites be defined? What potential exists for exploiting the waste resources that are generated?How can the waste management be optimised by reducing the quantity of waste and by optimal sorting?How can the client of a project influence the waste management?The purpose of the work was to investigate sustainable waste management in the building and construction sector and to highlight waste as a resource from an environmental and economic perspective.The aim of the work was to define an environmentally-efficient waste management system, to analyse the potential that exists in waste management and to draw up guidelines for optimal waste management.The method consisted of a literature study, two visits to construction sites and four interviews.An environmentally-efficient waste management system means that the waste is managed in the following order of priority:Prevention Reuse Recycling Energy recoveryLandfill The prevention of waste is an important area that has not been adequately explored by the building and construction industry. The quantities of waste could decrease with the implementation of measures such as ordering materials in the dimensions required, prefabricated components, logistics centres with Just-In-Time deliveries, less and improved packaging and less wrapping. The reuse of waste materials and temporary apparatus as well as the use of a return pallet system are examples of reuse that reduces the quantities of waste.In most cases the source sorting work is a matter of course and the proportion going to landfill is down at a low level. The source sorting can be optimised by sorting all materials that can be reused and recycled to use them as a resource.
Kopplingen mellan Livscykelkostnader och Building Information Modelling
Detta examensarbete har undersökt vilka möjligheter som skapas genom att använda BuildingInformation Modelling (BIM) för Livscykelkostnadsanalyser (LCCA). Arbetet beskriver förstLCCA och sedan hur BIM samt öppna standardiserade dataformat kan användas för LCCAoch för kvalitetssäkring av data. Till sist visas hur ett verktyg som räknar ut LCC direkt frånen byggnadsmodell kan utformas. Genom att kunna synliggöra konsekvenserna av olikalösningsalternativ och göra kvalitativa LCCA erhålls genomtänkta lösningar och medvetenhetom de framtida förvaltningskostnaderna. För en byggherre som också ansvarar för driften kandessa alternativsvärderingar och analyser leda till betydligt lägre förvaltningskostnader.
Effektiv lagerstyrning genom tillförlitlig prognostisering : Effective inventory control through reliable forecasting
This study was done regarding whether sealing or ventilation is the best solution to prevent moisture on cold attics. The authors of this report addressed the problem with moisture in attics when they started their cooperation with Peab.The methods included interviews with people, database research, and calculations of a project in Akersberga north of Stockholm. The conclusion is based on interviews and other information as they are analyzed in relation to the house of reference. The focus of this report is on problems with moisture in the attics known as cold attics.The background of the problem with moisture is that today?s slabs are usually insulated to save energy and that the attics nearly gives the climate as the outdoor climate.
Svensk Krigarkultur ? En samexisterande subkultur i Försvarsmakten?
The study seeks to clarify a cultural change in the armed forces (FM). The study is based on the hypothesis that repeated operations in war-like environment, where the FM sends professional combat units, develop a warrior culture. The empirical results indicate that there is an existing warrior culture at all three units surveyed.The subculture is verified by the constants of western warrior culture described in theory. The cultural change leads to ethical / moral and leadership challenges for FM..
HUNTER'S BEND - med vad vi bär berättelse
The Hunter?s Bend project is about how our personal possessions affect our perceived identity and in what way the value of an object may increase with the relationship that is built up towards the user. I have looked upon traces of time as an extension of an existing object. The outcome is a series of leather cases made out of one piece of folded leather, hardened and locked within itself. The history contained in leather, as a living material has been an important part of the project as well as how its features are used in the making and then allowing the product to change after use..
Svenskt bistånds geografiska flöden - Landfokusering
This paper aims to describe the geographical changes of Swedish international aid politics since 2007, which was the year the new aid reform of decreasing collaborating countries, came up. To decrease the number of aid receiving countries due to efficiency is not a new idea within Swedish aid politics, but Sweden received criticism from the (DAC) Development Assistance Committee, saying Sweden was active in too many countries, and the government established a policy to decrease the amount of countries given aid. Despite the government?s recent work, science has shown on a failed country focusing. This is followed up in the paper trough examination of statistics to measure the extent of the reduction.
Perimeter
The project explores the possibilities of using additive manufacturing (3d-printing) to build architecture. Through a combination of theoretical research and practical experiments a building system has been developed which has the capabilities to create houses with great geometric flexibilities to a affordable price today. The construction system Perimeter is demonstrated in a pavilion situated at Norra Djurgården in Stockholm. .
Livscykelanalys: Pelletspanna från kvänum energi
This study will identify the environmental impact in terms of carbon dioxide for a boiler house on behalf of Kvänum energi. The boiler central consists of a main building, which in turn contains multiple components such as boilers, pipes, etc, the boiler central uses pellets fuel. It also includes a silo and an ash container. The total weight of the boiler is about 63 tons. Each boiler has an output of 600 kW; the central includes three boilers with room for a fourth if necessary.
Doseringsutrustningen SafeBond Electronic
This thesis for the Master of Science degree was performed at Oppunda Electronics AB. The assignment was to further develop an existing prototype of a dispensing equipment. The dispensing equipment doses a kind of glue, bonding which dentist use to mend teeth. The dispensing equipment is adjusted to dose 12 micro litres of bonding. With the dispensing equipment SafeBond Electronic the user can reduce the bonding consumption with approximately 50 percent.