Lining techniques such as nap bonding and mist lining were developed in the late 20th century and have gained popularity alongside with the increased use of acrylic emulsions as adhesives. The ability of the adhesive to create a nap bond to the canvases without penetrating the fibers has shown advantages regarding reversibility. In addition, the use of moisture, heat and pressure is reduced, which can be advantageous for more sensitive paintings. These lining techniques have been included in several studies where reversibility, minimal intervention and respect for the individual requirements and problems of each object have been the focus. The adaptability of the methods has been confirmed and to further explore the adaptability, this study consists of three simpler application techniques with the adhesive Lascaux 303 HV on mockups.

Beans are a global source of plant-based protein, and in some countries, they constitute a primary source of protein intake. With ongoing climate change, including rising temperatures, it is necessary to adapt beans to ensure a reliable food supply. An important mechanism that many plants have, to cope with high temperatures, is cooling through transpiration. During transpiration, stomata open and release water vapor. Water molecules use heat energy from the leaf to convert into gas, thereby cooling the leaf.

SUMMARY Several studies have shown that weaning pigs are in great need of heat. The reason for this is mainly because the pigs are given very little feed just after weaning. Some of the pig producers of today have tried to get along with these problems by building some kind of hut for the pigs. Some of these pig houses have been included in this study.The study has shown shortcoming functions for the pig cottage. The expected heat increase has not occurred.

Control of a diesel engine equipped with Variable Geometry Turbine (VGT) and Exhaust Gas Recirculation (EGR) requires a multivariable control method. One problem is that the engine system is non-linear. Furthermore there are strong cross-connections between inputs and outputs and the inputs have alsoboundaries. To be able to manage these control problems, MPC has been used that is a multivariable method. The MPC-controller consists of an optimization problem and therefore MPC can find the optimum control signals in an easy way.

Hus byggs idag allt tätare för att möta högre miljökrav, ställda av både konsumenter och politiker. När hus byggs täta minskar luftläckaget genom klimatskalet. Tack vare det sänks energiåtgången då nästan all luft styrs genom en värmeväxlare. Tätheten i de nya husen har lett till att utsugande köksfläktar inte fungerar som de ska, beroende på att de behöver mycket luft. I detta projekt utvecklades ett utsugande köksfläktsystem för passivhus, de allra tätaste husen på marknaden.

To provide our company a new business opportunity I have in this essay examined the economical possibilities to sell energy. I have chosen to do a case study on my own farm in this essay. The farm is focused to cropping and also have some properties for hire. The farm is situated in the village of Fjelie and that?s where the opportunity for selling heat are. Fjelie has about forty houses. The idea is to build a plant where straw is being used as fuel.

Stump wood is a hot alternative when the heating plants demands more and more forest fuel. The aim with the study has bean to calculate the costs in four different systems for transportations of stump wood, examine if there are any differences in fuel quality for the stump wood in the different systems, analyse if the fuel quality in stump wood is affected with the time it lays by the road side and how much space the stump wood demands on the road side. To calculate the costs for the different systems a system analysis was carried out, where some of the costs were collected through field studies on Holmen Skog stump experiment and other costs were collected from literature and contacts. Data for the fuel quality study was collected from Eons heat plant in Norrköping. Data for the study of how much space stump wood takes along a roadside was collected from field studies.

In this report a study has been done regarding different heating systems on which are the mostcomprehensive with solar heating systems. The report has also been focusing if solar power can beused as a primary heating source for supplying more than 50 % of the buildings total heatingproduction. The University of Dalarna constructed a demo-house for this purpose and according tocalculations the total solar usage is more than 50 %. This house has been made for referenceregarding the design of the heating system of property 5:37.Further studies have been made to compare different heating systems that are compatible with asolar system, where the compared systems purpose is to be independent of direct using electricity. Asystem of this design is regarded as sustainable according to environmental as economic issues.

A two-factor design of experiments done on GGAB for the identification of two selected factors influence on the length of the scattering of heat exchanger gaskets. The work consists of four parts: study, choice of survey method, the performance of investigation and analysis of the results. Chosen factors on the study are considered to be the most effecting of the length distribution of seals during the production of GGAB. The study is the first of its kind both in GGAB and in the rubber industry and has an experimental nature..

Under detta projekt har vi tittat på hur man kan återladda en bergvärmekonfiguration med lågtempererade solfångare. Projektet utfördes åt Newsec Energy i Stockholm vars kund samfälligheten Ängsbacken ville minska andelen tillskottsenergi som utgörs av olja till sin bergvärmeanläggning. En utredning av anläggningen gjordes av Newsec Energy som visade att berget kylts ned och att anläggningens borrhål varit underdimensionerade. Vi fick uppdraget att utveckla en systemlösning med lågtempererade solfångare..

This report describes the development of a sample loader for my diploma work at Q-linea AB in Uppsala. The sample loader will replace the process of loading fluid samples into Q-linea?s instrument for biomolecule analysis. The earlier process was done by hand and was a time consuming and inefficient task.The work was initiated with a design phase where an overview of the system was created. The sample loader will be receiving text commands from a PC that coordinates all the subsystems like pumps and lasers on the analysis instrument.

The project was made in cooperation with Coffee Queen AB, Arvika. The task was to develop and design a new cooler for the milk to Jura Impressa X9, an espresso machine. The good assistance with staff at Coffee Queen and engineers in China and at KPA in Karlstad led to a solution to the problem. It was a long road to get there, many different concepts was developed. When the day came to decide which concept to work with, the choice stood between two different technical solutions.

A Biogas plant in SLU?s (Swedish University of Agricultural Sciences) management sustains to behave in con-nection with the new animal stables at Lövsta. There will primarily manure from stables that rot to biogas. The biogas plant will also have the capacity that rot others substrates that can arise in the farm operation. The aim with the biogas plant is to produce non fossil electrical and gas heat for own customs, to reduce smell impact from stables and to make possible different types of research investments within the area.This study has implemented multiple cases study of different investment scenarios.

This study was done regarding whether sealing or ventilation is the best solution to prevent moisture on cold attics. The authors of this report addressed the problem with moisture in attics when they started their cooperation with Peab.The methods included interviews with people, database research, and calculations of a project in Akersberga north of Stockholm. The conclusion is based on interviews and other information as they are analyzed in relation to the house of reference. The focus of this report is on problems with moisture in the attics known as cold attics.The background of the problem with moisture is that today?s slabs are usually insulated to save energy and that the attics nearly gives the climate as the outdoor climate.

To introduce a standardized component assortment takes a lot of effort in order to make real cost savings. The rationalization effect itself is important, but perhaps even more important is to state the aim of the standardization efforts in a well-defined way. How can an organization assure that they are working in a proper way? How do they know that their efforts are being interpreted into the whole organization? And, how do they know that the standardization efforts actually save money? Different components differ heavily e.g. in technical complexity and quality issues.