GE Healthcare wants to investigate whether additive manufacturing would be an alternative method in their workshops in the Umea? plant. Additive manufacturing is called 3D printing in everyday language and manufactures details by building them up layer by layer in an automated machine. The purpose of this work is therefore to investigate how mature additive manufacturing methods are and how they could be used at GE.The work has been divided into three parts. The first section investigates how additive manufacturing would work in the production workshop at GE.

The aim of this thesis was to analyse BARO WOOD AB:s timber measuring and quality sorting and to evaluate the analyse program Stockholmen. The purpose was to get a better understanding for the quality sorting made at BARO WOOD AB today, analyse differences in center board quality from logs with a good quality and logs with a bad quality, suggest new sorting criterias developed from analyses made with Stockholmen and to evaluate the program Stockholmen. All analyses are based on data gathered in a test sawing made at BARO WOOD AB in June and July 2002. The test sawing was made on four different diameter classes and every diameter class consisted out of A or M-grade logs, with a better quality, and B-grade logs with a lesser quality. The logs where sorted out with BARO WOOD AB:s existing quality criterias.

According to the basic values of the Swedish Trotting Association the horse and its welfare should always be held in highest consideration. One part of the animal welfare work in the organization is to ensure good horse management practices by controlling all active trainers through the local licensing committees situated at the Swedish racetracks. The Swedish Board of Agriculture stated that high quality animal welfare assurance programs used by the industry organizations can be used in the risk assessment of the official animal welfare control to make the official control work more effective and the ambition of the Swedish Trotting Association is to establish an animal welfare assurance program which may be approved by the Swedish Board of Agriculture. Racehorses are exposed to welfare hazards both in their management as well as during training and racing and factors like handling, training, feedstuff, stable environment, medication and the possibility to express natural behavior all affect the welfare of the horses. The aim of the project is to investigate and evaluate the animal welfare work performed by the licensing committees and to give advice on how to improve the industry?s animal welfare control.

GE Healthcare wants to investigate whether additive manufacturing would be an alternative method in their workshops in the Umea? plant. Additive manufacturing is called 3D printing in everyday language and manufactures details by building them up layer by layer in an automated machine. The purpose of this work is therefore to investigate how mature additive manufacturing methods are and how they could be used at GE.The work has been divided into three parts. The first section investigates how additive manufacturing would work in the production workshop at GE.

To create a profitable and competitive business an important factor today is a well-functioning logistics. Through effective internal material flows effective logistics can be achieved. Unnecessary handling and movement of materials is a waste which affects the internal material flow. These wastes should be identified and eliminated as much as possible to improve the internal materials handling and through that achieve a more efficient business. At Fagerhults Belysning AB, where professional lighting systems are developed, manufactured and marketed, a new inventory has been built and changes in the assembly has been made during the past year.

Ökad efterfrågan på virke har lett till ett ökat intresse för och användande av olika produktionshöjande åtgärder. En sådan åtgärd är dikesrensning som innebär att befintliga diken eller dikessystem rensas för att de skall bibehålla eller återfå sin ursprungligt avvattnande och produktionshöjande funktion. Sveaskog avser att öka omfattningen av dikesrensning. Därför behövs en kartläggning av behovet på deras marker. På samma gång behöver produktionseffekterna och livslängden på dikena utrönas. Studien genomfördes via en studie av befintlig litteratur om skogsproduktionseffekter efter dikesrensning och dikning samt förfall och livslängd hos diken.

Käppala wastewater treatment plant situated on the island of Lidingö northeast of Stockholm is running a project during 2004 and 2005 with the purpose to map out the capacity of anaerobic digestion in the digesters that treat primary and excess sludge. The purpose of this thesis work, which is part of that project, was to characterize the present anaerobic digestion process and to investigate its capacity to treat other organic wastes such as restaurant waste and waste from water works. To decide the potential of both methane and biogas production from different substrates batch laboratory tests were carried out. To imitate the anaerobic digestion process at Käppala continuous tests with small scale reactors were carried out. These reactors were later fed with restaurant waste.The batch laboratory tests showed that primary sludge had a potential biogas and methane production of 0,62 and 0,35 Ndm3/g VS respectively after 40 days of digestion.

Summary Title: How to make decisions on software based servicedevelopment in the mobile handset industry.?The Rapid Model for Holistic Application Evaluation Authors: Per-Inge AnderssonPatrik Dreveborn Tutors: Björn Regnell, Department of Computer Science,Lund UniversityRobert Wenglén, School of Economics and Management,Lund University Problem formulation: Academically the questions of finding out what constitutes a sound decision base and finding out how to handle the issue of a holistic approach must be addressed in order to make a well balanced and relevant decision model. The core question is which decision criteria to include and which drivers are important in estimating the status of the criteria? Practically to provide Sony Ericsson with a formalized evaluation process for decisions on software development that is transparent, objective and challengeable. Purpose: Academically to contribute to the field of decision making research by elaborating on how to make a holistic, rapid and rational decision model.

The objective of a site leasehold is to allow the lessee to occupy a specific plot of land. In return, the lessor imposes an annual ground rent. The ground rent ownership gives the lessor the possibility to capture the increasing in land value. As such, the rent is based on the value of the land multiplied with a percentage that reflects the yield of the land value. It is renegotiated every ten years.

Logistics planning for a construction site is usually limited by traffic flow to and from the workplace. The geographical location of the construction site is determined by roads around the workplace and opportunities for well-functioning logistics. Inventory of material is often impossible because of the frequently small workspaces. As a result, a concern relating material handling remains . Even before the establishment of a construction site, it is required in the construction industry to eliminate errors that might arise in the planning stage.

Robotic milking in Automatic Milking systems (AMS) is proposed to reduce manual labour and at the same time increase milk yield by increasing milking frequency. In order to increase milking frequency, it is essential to have well-functioning cow traffic. Investing in an AMS is a great capital investment for the farmer, thus it is of major importance to ensure maximal AMS capacity. This study investigated the effect of the traffic systems Feed First? and Free cow traffic with and without waiting area (WA) on cow performance and AMS capacity.

Road safety is the result of measures to reduce therisk of accident and injury. (Nationalencyklopedin,2008). In principle, road safety means to arrive saveand sound.Safe traffic in cities is mainly achieved throughappropriate speed. In Sweden, more than half ofall rides happen with a speed above the legal speedlimit (Holmberg, Hydén m.fl, 1996). To reducespeed in order to increase safety requires measureswhich influence a driver?s motives for his orher choice of speed even if these are not rational(Boverket, 2002).

Road safety is the result of measures to reduce therisk of accident and injury. (Nationalencyklopedin,2008). In principle, road safety means to arrive saveand sound.Safe traffic in cities is mainly achieved throughappropriate speed. In Sweden, more than half ofall rides happen with a speed above the legal speedlimit (Holmberg, Hydén m.fl, 1996). To reducespeed in order to increase safety requires measureswhich influence a driver?s motives for his orher choice of speed even if these are not rational(Boverket, 2002).

Flexicurity is a union of the English words flexibility and security. The union of the two words to one common term, hints that flexibility and security does not have to be each others counterparts in order to achieve good economical development and employment. Flexicurity, as it is found in Denmark, is described as a three part model composed of active labour market politics, generous financial compensation in the case of unemployment and flexible labour law. The existence of strong collective agreements and three part cooperation is of great importance for the good flow of the Danish model. The same goes for education of different kinds.

The globalization that has occurred during the last few years has made it more important for companies to have a well-functioning logistics system. Customers demand more options, which lead to an increased flow that creates greater demand regarding packaging and transports. Diverse logistics costs are nowadays a substantial cost for many companies. Therefore, more effort is aimed at optimizing transportation to lower these costs.The purpose of this project is to create a user-friendly calculation of logistics costs that illustrates how the costs vary, depending on how the flow is structured. This is done by examining which aspects that affect the total logistics costs and by mapping which aspects that should be included in a calculation of the logistics costs.Literature studies have been carried out parallel with empirical studies at Scania's production unit, MC, in Oskarshamn.