The term ?Object Shift? means that a weak object pronoun has been raised to a position to the left of a sentence adverbial. Primarily, there are two positions to which a weak object pronoun can be raised; one of them is called Long Object Shift.In this paper, I primarily deal with finite verb frequencies in sentences with Long Object Shift in Swedish. Also, in order to further define the verbs in these sentences I discuss verb semantic and syntactic valence in relation to the shifted object. Furthermore, I discuss the search methods which have generated sentences with Long Object Shift in written sources in Swedish; an equivalent study has never been done before.

Traditionally, rolling mills use emulsions based on a mixture of oil and water for lubrication. Since two years ago SAPA has been using (instead of oil) a synthetic lubricant so called conditional emulsion for hot-rolling of aluminum. This lubricant is water based and homogenous at ambient temperature, but switches to a two-phase system at heating above the cloud point.This project aims to validate and if necessary modify an existing HPLC method for quantifying two out of three key components (A, B and C) in the conditional emulsion. Attempts to develop a method to quantify the pH adjusting components, X and Y were also made. These two methods are required to optimize the lubricant.Due to the complexity of the components, it has been difficult to present a method for quantification, and HPLC with ELS detection was chosen after a long series of trials.

AbstractPurpose: The purpose of this thesis was to examine to which extant the politically governed organization, Swedish association of local authorities and local regions (SALAR), has been mediatized. Furthermore the purpose was to examine how SALAR being a Meta-organization affected the mediatization process. To accomplish this the thesis studied how SALAR organized themselves internally in order to form opinion through the media in one of their prioritized issues. A further purpose was to equalize SALAR?s mediatization process with the mediatization process for the whole political system. Method: This is a qualitative study which the gathered material has been collected through two types of methods, semi structured interviews and field observations.Material: A total of eight interviews were made distributed over three departments inside SALAR.

To fence in pastures for sheep today is a major cost, especially because of the time required when using current methods. What takes most time is starting to fence off a new area, but to maintain a fence is also a continuous effort. The main function is to keep the sheep at the field.! !By interviewing and observing sheep farmers on how they work with fence today and what their problems was, I got a better understanding of the problem. Also looking at a number of other things like the context, statistics on sheep farming, laws and competition mapping gave a wider image. But the most important part in my research occurred when I talked to experts about sheep behavior.

The object with the study of this literature was to describe differente programs of care and patients and relatives experience and opinion about the caring for patients with Anorexia Nervosa. The method the author used was a descriptive literature study based on imperial studies. The studies were based on 15 scientific articles within the chosen field. The results shows that these patients hade special needs to be seen and heard as individuals, involved in their own treatment, and have good contact with the caring staff. The study also shows which methods were mostly appreciated involving nurses, patients and relatives.

It is important to understand the process of appraisal of a business in order to establish its value. The purpose of our thesis is to establish which methods and models are used when evaluating a business and investigate the factors that may affect the value and price tag of a business. We have used a qualitative approach by conducting both indepth interviews and a survey as well as reading literature within the field. The main conslusion in our findings is that the common practice of discounted cash flow is widely used when bestowing a monetary value for a business, and in order to raise the value a well established customer relationship was the single most important factor. As far as lowering the value, the answers were of such a wide spread that a single factor could not be attributed.

This study illustrates how drama methods and career counselling might interact. The aim is to investigate whether drama methods can enhance career counselling methods. Drama is here defined as an umbrella term that includes all forms of action methods used in psychology and education.A literature survey was carried out in parallel with qualitative research interviews. Three professional drama leaders were interviewed separately. This was followed by a group interview with five upper secondary school students, who had all taken a course in drama with a focus on personal development.The findings show that there are common and consistent goals and values between drama and career counselling.

Today?s wind power plants are only compensated for their reactive power consumption at no-load. As the wind power plants grow bigger the amount of reactive power they need also increases. This is no longer a problem that can be ignored, especially as the net owners are beginning to charge the reactive power they transport.In this thesis a couple of different methods of compensation and their prices will be discussed and evaluated. Problems, such as self-excitation, that can occur if one fully compensates the wind power plant will also be brought to surface.

Projects are often spoken of in the terms of rational systems. However, some researchers point out the relevance of viewing projects as sets of relationships. Little is published about what aspects of relationships that are important for the managing of projects. We have argued for the necessity of such research. With previous research, our case study and interviews we indentified communication, responsibility, cooperation, togetherness and trust as important relational aspects in projects.The overall perceived success for projects in this case, was increased with the adoption of new agile methods.

Chunks and Tasks is a programming model based on the C ++ programming language. This programming model is used for electronic structure calculations, among other things.The purpose of this project is to improve the CHT-MPI software library for Chunks and tasks, so that calculations of matrix-matrix multiplications are performed more efficiently than they do with the existing software library. The software library is based on the work stealing method, which is a method the software library for Chunks and Tasks uses for the distribution of the calculation work. The considered way to improve the software library is by modifying the work stealing method in a way that makes the distribution of calculation work happen in a more efficient way , which will lead to calculations performed faster than before.Two different modifications of the work stealing method were tested and it led to two new methods, Method 1 and Method 2, which distributed the calculation work differently. Method 1 did not give results that were compatible with the theory, since the calculation time with this method was much longer than the previous method.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

This qualitative study involves the implementation of Lean and Kaizen methods in a Swedish service industry. Lean philosophy is based on a method to achieve more with less. In practical terms this means that the use of an organization's resources is improved. The origin of Lean is the Toyota Production System. Now, Kaizen methods give managers and employees a better more efficient system to reach their goals within the organization or company.

Slopes in fine till soils are exposed to surface erosion due to rainfall, snowmelt and upland water sources. Large areas of road slopes are therefore covered for surface erosion protection. Preventive methods like ditches and trenches are also being used. Silt tills are particularly troublesome since the water can bring the soil into suspension and cause mudslides. Different methods for erosion protection have been studied in this work, with the emphasis placed on rockfill covering. The need for and the dimensioning of this type of covering has been examined in literature and field studies.

Hemoglobin is an oxygen binding protein in erythrocytes. Hemoglobin is composed of four polypeptide chains. During the fetal stage the type of hemoglobin called fetal hemoglobin (HbF) dominates. After birth HbF is replaced by adult hemoglobin (HbA). HbF persists in concentrations less than 1%.