The ability to tackle NP-hard problems has been greatly extended by the introduction of Metaheuristics (see Blum & Roli (2003)) for a summary of most Metaheuristics, general problem-independent optimisation algorithms extending the hill-climbing local search approach to escape local minima. One of these algorithms is Iterated Local Search (ILS) (Lourenco et al., 2002; Stützle, 1999a, p. 25ff), a recent easy to implement but powerful algorithm with results comparable or superior to other state-of-the-art methods for many combinatorial optimisation problems, among them the Traveling Salesman (TSP) and Quadratic Assignment Problem (QAP). ILS iteratively samples local minima by modifying the current local minimum and restartinga local search porcedure on this modified solution. This thesis will show how ILS can be implemented for MSA.

AbstractThe overall aim of this study is to show how phonological awareness develops during the first school year and how this can be affected by different teaching materials and working methods. Two classes are compared in the study. One of the classes has digital teaching material and the other class has traditional teaching material. The study seeks to show to what extent there are differences between the groups? phonological awareness.

Background and problem: In the last few years the threat against the environment and especially the emissions of carbon dioxide has become increasingly debated. The government have set up a goal to lower the emissions of carbon dioxide with 40 percent until 2020 compared to the level in 1990. The emissions in the transportation sector have, in contrast to the total emissions, increased since 1990 and will continue to increase unless powerful control measures are implemented. The lorry centres have to use strategies to answer to these external threats which lead us to the two questions of this thesis: - What methods do the lorry centres use actively and which do they consider as the most important methods for fuel saving? - Are there any differences which methods small, medium and large centres considers as important? Purpose: The main purpose of this thesis is to examine which methods lorry centres use actively and which they consider as important for fuel saving.

There are several methods and models within the areas of software engineering on how to proceed during a software development process. For each of these methods and models there are benefits and drawbacks, depending on how you choose to look at them. A difference of principle between the different models is that they either advocate iterative development or not. In parts of software engineering one makes use of different methods depending on which is most fitting in a specific situation. There are several methods on how to recieve more qualitative data from the end-users during the requirement collection, but the reappearing pattern is still user centric participation, which means that the user participates more actively in part of or the entire development process.

The use of earth bricks in Scanian building traditionThe present work is concerned with the manufacturing and use of earth bricks inbuilt heritage in the south Swedish province of Scania. The first part of the studyprovides a thorough description of the traditional use and manufacturing of earthbricks based on relevant literature, archive material as well as interviews withinformants. This forms a basis for the second part of the study in which practicalexperiments on and tests with earth bricks where carried out. This involved themaking of traditional earth bricks of different composition. The new handmadebricks were compared with industrially produced bricks (extrusion bricks) and oldhandmade bricks.

This is a qualitative study that explores how bilingual children develop their language through play. The study is based on observations and interviews conducted in a preschool located in a multicultural area of Stockholm.The purpose of using two qualitative methods; observations and interviews, was to get a bigger picture of the study area. The results of the study, illustrated through observations and interviews that I have conducted, shows that the game has great role for bilingual children's language development. Furthermore, the results show that the informants are aware of the importance of play for bilingual children's language development especially when they are talking about investing in the promotion of children's language by using different methods and materials in their pre activity for various games and activities.One of my conclusions is that bilingual children learn the language during both free play and structured play especially when educators are present and aware of the activities that they perform. It is also important to see children as individuals to cover all the needs of children at different activities.

The main purpose of this essay is to examine, in what way the paintings by Karin Broosand Markus Åkesson are images of autentic situations and furthermore in what way themediespecific essence is performed photografically. Questions occuring: 1) How are thecreations of reality shaped in the two chosen photorealistical paintings? 2) In what waycan you distinguish the iconicity and indexicality in the paintings Den vita klänningenand The Passage? 3) How does the photografic presence occur in the paintings andfuthermore how can you distinguish the mentioned parts above according to thepaintings? The theoretical standpoint is based upon Charles Sanders Peirces ideasconcerning iconicity and indexicality. The methods used are based on thoughtspresented by Andrew Benjamin and Mieke Bal. The signs of iconicity and indexicalitycan be studied in various ways in the two paintings, depending on how abstract andobvious different parts occur in the paintings.

Two different methods for measuring biogas production were used, gas meter and gasbags. The gas meters were electronic and counted each time a certain gasvolume passed through them. The gasbags collected the gas that hade passed through the gas meter until a manual measuring could be done. The two different methods gave the same result for a volume at three liters but for a volume around 0,2 liters they did not. Accuracy and precision for the gasbags was more exact than for the gas meters even if the method was difficult with a lot of different elements that could affect the result.

Today, pigs are moved on farm, between farms, between countries and to abattoirs. This movement of live pigs requires handling practices that are designed for the purpose. The objective of this study was to research the use of paddle in moving pigs, to investigate if there were different methods of paddle practice, explore the time efficiency of different kinds of paddle use and if there were any time variations in methods that varied in intensity of touch. This study was done on two Swedish abattoirs for a total of five weeks. A total of 22 transporters working at two different abattoirs where studied during unloading of pigs at the abattoirs.

Background: Funds have become a more popular way for investments. After the financial crisis in 2008 there was some sectors that shown a better results than other depending if the sector was affected by the economic situation or not. Therefore can  investments in sector funds be a good way to get a high return, but it also has a high risk.Problem: Has the risk any impact on the return considered funds in sectors that is affected by the economic situation relatively to sectors that isn?t affected by the situation in the economy?Purpose: Determine whether sector funds risk has any impact on the return. Also if there are any differences between sectors depending if they are affected by the economic situation or not.

This master thesis aims to examine the methods of the conservation field and their visionabout maintenance and change, in terms of liturgical values. This is to be able todetermine if there is a need to develop the methods that the field of conservation has tosafeguard the intangible cultural heritage of the churches.This is mainly a literature review, focusing on different tutorials from the Swedish nationalheritage board, and different texts on liturgy aswell as Unesco's Convention for theSafeguarding of intagible Heritage (2003), ratified in Sweden in January 2011. A casestudy of the practical work has been carried out on three churches that have undergonechange. The application process and the results were important for this study.The conclusion is that the conservation field have ambitions to preserve the liturgicalvalues, but they do not have sufficiently developed methods to do so. Nevertheless, itappears that most cases of change in churches, increases the liturgical values..

The aim of this thesis was to investigate if the robotized welding method FSW (Friction Stir Welding) could be applied for joining a rotating structure in an aero engine at Volvo Aero Corporation. FSW is expected to introduce less defects than today?s welding methods and could therefore be suitable for critical aero components. The material is the nickel based alloy Inconel 718, however a material experimentation is outside the scope of this report.The main goal of this study is to verify if the ESAB ROSIO robot based FSW-system has a suitable work space to be able to weld the rotating structure, and if the welding tool has accessibility to the joints. The FSW-process needs a rigid fixture, and a number of fix-ture concepts are presented based on a proposed weld sequence.

In early January 2010 the authors participated in a meeting with the chief engineer for a company in which a central part is manufacturing of printed circuit boards (PCB). At this meeting it emerged that the machinery and production methods have changed substantially since the early 1990's. The spreadsheet for preliminary production time calculations by the company is today based on conditions from almost 20 years ago. The company has over the years been trying to adjust the spreadsheet template. The result of these adjustments has filled it with historical residue, something which makes the template difficult and time consuming when the primary user tries to handle it.The purpose of this study was to help the company increase its accuracy in the representation of the production times for the different PCB-based products by developing a new costing model based on an already existing but inadequate spreadsheet template. The company also expressed the wish that the new costing model would be less time consuming to work with.The methods used to achieve the goal are interviewing, participatory observations and meetings with relevant persons. The data obtained were analyzed using the theory on PCB production and visualization of data.

The aim of this thesis was to answer a number of questions about the environmental consequences of aircraft de-icing. A further aim was to suggest how the environmental consequences due to the release of de-icing fluids can be measured and reduced.The main impact of the aircraft de-icing on the environment is due to the large oxygen demand for the degradation of glycol based de-icing fluids which are released in the environment. The effect of the increase in oxygen demand depends on where the degradation occurs in the ecosystem. In a sensitive ecosystem, the large demand of oxygen could provide an anaerobic environment which would be harmful for many types of organisms.In order to reduce the negative effects of the applied de-icing fluid, there is some type of collection system at every regular airport in Sweden. The methods of collection can be divided into two general groups, hydrological isolation or vacuum sweeper trucks.

The technology used in the development of web-applications is evolving at such rate that it has become more and more important to keep web-applications modern. If an application is based on a technical platform that is not renewed, the platform may over time develop into an obstacle in further development of the application. There may be compatibility issues and some of the code may be unnecessary due to abstraction, and therefore more time consuming to work with. Sometimes the reason may be that an application has been built to run, and is running on an application server that is no longer being maintained. The system can be large and modernization can cost a lot.