The purpose of this report was to investigate to which extent local presence of large herbivore mammals (Alces alces, Cervus elaphus, Capreolus capreolus, Dama dama and Sus scrofa) covaries with small rodents (Myodes glaerolus, Apodemus flavicollis and Apodemus sylvaticus? The hypothesis was that high abundance of wild ungulates would inhibit the density of small forest rodents. The data was collected during field work within FoMA (Environmental Monitoring Assessment)/SLU (Swedish University of Agricultural Science). The Ungulate dropping inventory and rodent trappings, which is the base in this report, where performed 2012 ? 2014 in Gnesta/Nyköping municipalities (G/N) with a relatively high density of wild ungulates and Vetlanda/Växjö municipalities (V/V) with relatively lower wild ungulate density.

This study raises the question how the implementation of the balanced scorecard in the municipality of Gotland has been influenced by the way of communication. A case study is made in the administration of Social-and care management on Gotland. We have been focusing on two different ways of communication. The first one is Shannon and Weavers model where communication is explained as a transmission of a message through a channel to a receiver. The other one is sensemaking where it is focal to give the information meaning.

A uniform environmental rating system for green buildings is demanded in today's society, where the requirements of the energy consumption for real estate are increasing. There are several different systems around the world used to rate buildings, all with different assessment criteria and starting points, which make it difficult to compare environmental rated buildings with each other.The purpose of this paper is to acquire knowledge about the differences between the Swedish environmental rating system Miljöklassad Byggnad and the American LEED, to discover which system is most advantageous. We also examine whether environmental rating affect the value of a property.Miljöklassad Byggnad is relatively simple structured, which makes it possible for private individuals to rate their property. LEED is better structured on the other hand in the case of environmental classification of commercial properties, because there are manuals for among others hospitals, schools and retail. The rating system for Miljöklassad Byggnad is good since the system seeks to fix the number of errors and deficiencies as soon as possible.

Finanskrisens inträde i mitten av 2008 utsattes Sveriges ekonomi för kraftiga påfrestningar. BNP-tillväxten mattades av och vi har till och med sett en negativ tillväxt för första gången sedan krisen i 90-talets början. Samtidigt har både hushållens konsumtion och näringslivets produktion rasat vilket har bidragit till kännbara effekter och en osäker tid för båda parter. Till en följd av detta har många företag tvingats avveckla sin verksamhet helt medan andra fått se över sina kostnader. Detta har i sin tur bidragit till att arbetslösheten ökat med cirka tre procentenheter mellan 2008 och 2010.

The task for this thesis is to design a tool that is used to cut-out preforms of thermoplastic adhesive and also to make an estimate of costs for the stamping tool. The tool is used in the repair process at the MCM production line. The result of gathered information has affected how the design of the stamping tool has developed. The handling of thermoplastic adhesive in the repair process is one of the factors that influenced the design. The adhesive is sensitive for exposure to moisture. Therefore an automated feeding system of the adhesive is not recommended. The users wished for an automated stamping tool.

FlexRay is a new communication protocol which is fast, reliable and flexible and therefore can meet the increasing demands on data communication in the vehicle industry. The protocol is developed by an industrial consortium containing among  others BMW, Daimler Chrysler, Motorola and Phillips. Today (May 2009) Hägglunds is using CAN for data transmission in their systems. CAN is getting obsolete and has difficulties in coping with the increasing flow of communication. In this report FlexRay and its communication capacity is studied.

Anledningarna till att använda sig av en trådlös signalöverföring i en industri kan vara många, oftast handlar det om ställen där det är svårt eller omöjligt att ha en trådad förbindelse. I det här fallet är det en sedimenteringsbassäng där man tar hand om processvatten från industrin. Bassängen är utformad som en cylinder där vattnet rinner genom olika avdelningar för att minska innehållet av sediment. I bassängen cirkulerar en plattform med diverse omrörare och skrapor på. Eftersom denna del går runt hela tiden är det svårt att ha en fast förbindelse till de drifter som finns.

In the automatic manual transmission system, Opticruise, the choice of gear is based on several parameters such as road incline, driving resistance and vehicle mass. Many different mass estimations are made during driving. A final vehicle mass is then used to determine the current gear. Construction vehicles are often not equipped with air suspension and can therefore not estimate the vehicle mass when standing still. If that sort of vehicle is reloaded while standing still an incorrect mass estimation will be used and as an effect of that also a wrong gear.

In this study it was investigated if the adoption of a new routine for quality control could improve the precision of the dimension measurement obtained by harvesters. Data was collected from three different harvesters. First, a reference data set was collected before the new procedures had been incorporated, and then when the new methodology was implemented another data set was collected by the harvester operators, allowing the two data set to be compered. The results indicated that following the implementation of the new procedures, the reliability and the precision of the measurements has increased. All harvesters included in the study had improved regarding most of the controlled factors such as standard deviation, systematic difference and hit rate within ± 2 cm for length and ± 4 mm for diameter..

Fler människor börjar använda olika mobila operativsystem i mobiltelefonen samt appar som enbart fungerar på plattformen. Det leder till att app-leverantörer måste utveckla varje app till varje specifik plattform vilket är dyrt. De vanligaste operativsystemen som används idag är Android samt IOS men hösten 2012 släpptes Windows Phone 8 vilket innebär ytterligare en plattform att ta hänsyn till. I sammarbete med företaget Sogeti Jönköping fokuserar studien på att hitta en metod som gör det möjligt att migrera appar mellan plattformar och till Windows Phone 8. Studien innefattar också att identifiera för och nackdelar med olika app-typer genom en litteraturstudie och intervjuer samt att testa om migrationsmetoderna fungerar praktisk genom en implementation.Resultatet har påvisat att det finns två stycken olika metoder för migration vilket är PhoneGap och Xamarin.

The determination of the optical properties of biological tissue is an important issue in laser medicine. The optical properties define the tissue´s absorption and scattering behaviour, and can be expressed by quantities such as the albedo, the optical thickness and the anisotropy coefficient. During this project, a measurement system for the determination of the optical properties was built up. The system consists of a double integrating sphere set-up to perform the necessary reflection and transmission measurements, and a computer algorithm to calculate the optical properties from the measured data. This algorithm is called Inverse Adding Doubling method, and is based on a one-dimensional transport model.

Ericsson develops a new stripline directional coupler. Its design is described in appendix B and differs from the directional couplers Ericsson uses in current products. The new directional coupler will be used for transmission power measurement in future UMTS 3G base stations.The most important parts of directional coupler theory are presented. It is necessary to study this theory to understand how the coupler works and how it should be designed to get good performance.Optimal directional coupler termination component values to get high directivity and broad directivity bandwidth have been investigated.The trim screws trim ranges have been studied.A simple analysis of serial production performance when termination component tolerances are taken into consideration has been done.The resistance components reactive (inductive/capacitive) characteristics at 2.14 GHz have been analyzed.The directivity performance limitations of the directional coupler, when Ericsson?s band pass filter is connected, are investigated.Design changes leading to better performance are proposed.

Nanotechnology, one of the most interesting sciences today will no doubt have an enourmous impact on tomorrow's society and industry. One of the most interesting nanomaterial that has been discovered is the semiconductor quantum dot (QD). This material shows interesting novel properties such as a size-dependent band gap, which is an effect caused by the quantum confinement effect in all three dimensions. Due to this phenomenon the absorption spectrum can be tuned to the desired value by adjusting the size of the QD.This thesis aims to investigate how the solvent ratio of H2O/Ethanol affects the optical and structural properties of copper sulfide QDs manufactured in a chemical synthesis way using modern microwave heating. The process of manufacturing QDs using chemical synthesis often involve a capping-agent to prevent the QDs from agglomerate into bigger structures.

The primary goal of this study was to investigate how the radial growth of retained trees responds after thinning-from-above. The National Board of Forestry which initiated this study, was interested in whether there were differences in the growth-response between the tree species Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L.) Karst.). Another question of issue was if there were differences in the growth response between trees of different sizes. It is within the framework of the National Board of Forestry?s, Continuous Forests Project that these urgent questions are to be answered.

This thesis treats the subject of a complete steady state and dynamic model of the VSC-HVDC covering both the AC and DC system-side of the converter. The topology of the model is recreated after the scheduled transmission line in the south of Sweden, called SydVa?stla?nken. The topology covers both a simple two terminal connection as well as a multi-terminal one. This model is to be implemented in the power system simulation program ARISTO.