NorFor is a cooperative project between the consulting organisations owned by the farmers in the Nordic countries ? Sweden, Norway, Denmark and Iceland. The project started in 2001 and the outcome, the system for ration calculation NorFor Plan and the model for evaluating the ration NorFor Evaluation, was completed in 2006. Along with NorFor Plan economical optimization are available and according to literature, the optimization will generate a 2 öre lower feed cost per kg milk, and thereby improve the profit for the farmer. The use of NorFor Plan in Sweden for feed optimization during spring 2008 has been very small. In this study eight herds in the middle of Sweden fed half the herd according to the classical system used in Sweden and the other half according to NorFor Plan system.

This work has been made in cooperation with the municipality of Eslöv and the inventory area is a part of the deepening of the municipality plan of east Eslöv. The aim of the work is to test the principle of balance in the overall planning. Later in the detailed planning process a more detailed calculation is made and a suggestion of suitable measures for compensation is made. Then the method with green area factors can be used. The goal is to balance the negative influence on the environment from the planned impacts to gain a sustainable development of the city. The principle of balance means that the one responsible for the development also has to compensate for the negative impacts on nature and landscape that comes with the development.

AbstractThis work was assigned by a technological company that manufactures gas detectors in which the sensor signal is processed using digital filters. These filters have been developed by a consultancy firm which converted previously used analog filters to digital filters. The purpose of this work has been to analyse inadequate, and sometimes erroneous, documentation from the project in order to provide the company with know-how and tools for further improvement of their products. The work has been done using the simulation software COMSOL which was bought solely for the project. Analysis showed serious flaws as well as pure errors in the consultant?s documentation.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

Laws and regulations govern the school kitchens in Sweden. The municipality controls how well the school kitchens obey those laws. An annual fee covers the municipality?s expenses for the public control of the school kitchens. To be able to calculate this annual fee, a risk evaluation needs to be done.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

Inflammatory airway disease (IAD) is a respiratory disorder that most commonly affects young horses performing at a high level. The clinical signs are often mild but the disorder can cause a marked decrease in performance to a point where the horse has to be taken of training and competing. The aetiology underlying IAD is not yet fully understood. One current theory is that a type I-hypersensitivity reaction due to allergens in the environment is the cause in some horses. The most reliable diagnostic method is a bronchoalveolar lavage (BAL) since it reflects the inflammatory status in the most distal parts of the lungs, which are affected in IAD.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

An automatic control system for calibration of pressure indicators has been constructed. This control system can be used as a complement to the calibration system located at AerotechTelub, division MainPartner, in Linköping. The calibration system used today contains some not wanted pressure changes, which is compensated by hand today. The new system presented in this report automates the calibrating process and simplifies the calibration. Suitable hardware as motor, controls card and so on have been found and software in the form of Visual Basic program has been developed.

To conclude this year?s introductory course in Mechatronics the students, in groups of 6,constructed a prototype based on the technical requirements established by the course teachers.This year they consisted of the following: two wheels only, active balancing, remote controlledand able to stop when crossing a pre-determined marker on the ground. The project lasted for 7weeks and the result is a working prototype and this report.The report reviews the chosen solution, subsystems and the finished prototype as well assuggestions for improvements, discussion and analysis.The prototype constructed embodied most of the group?s earlier individual technical specialtiesand consists of the following: a flywheel for balancing, ultrasound for angle measurement, areflective photomicrosensor to detect the marker and Bluetooth for the hand control..

This report is written in cooperation with the Swedish National Road Administration South-Eastern Region in Jönköping. The report is a result of the evaluation to give an answer to the question about how well the function contract has been carried out on the E4 in Östergötlands and Jönköpings län. The evaluation is divided in two hard parameters and one soft.The Swedish National Road Administration is interested in knowing how the standard on the road have been changed during the functions period, which is the reason why the first hard parameter is considering road standard. To evaluate the standard there have been a comparison of values from measures taken every year on the current road stretch. The second hard parameter considers economy.