This report is an evaluation of Peab's purchase and call-off system, PIA.PIA is used to order goods for Peab's construction sites. The background to the work is that users of the system have understood the system cumbersome to use when purchasing goods for construction sites. The evaluation was carried out by the interviews and tests with users of the program, in this case, supervisors and site managers at the company. Ten users of the system were interviewed and eleven people have carried out a test order.The focus is primarily on the test order that users have implemented, which has been clocked and analyzed for time and cost. The evaluation is also a user analysis concerning how the users perceive the program, mainly in terms of usability, functionality and benefits.The result of this report shows that PIA is economically profitable to use for the purchase of goods for construction sites.

This paper presents the result of a master thesis project at 30 Hp, master of industrial engineering at Luleå University of Technology. The project was performed during 20 weeks, spring 2014, in collaboration with ABB Control Products in Västerås. The aim of the project was to evaluate two half-automated assembly lines for a new generation of contactors, the NAFC assembly lines (New AF Conductor). The aim and purpose of the project was achieved by answering the following questions:? How are the ergonomic working conditions at the NAFC assembly lines during spring 2014?? Which areas at NAFC assembly lines can be improved for the work environment?? How can the ergonomic work conditions improve at the NAFC assembly lines?Literature reviews were performed from earlier research papers and articles of the ergonomic, musculoskeletal and work environment subject, from where a number of chosen methods and tools were used to perform the ergonomic evaluation.

Efficient numerical methods for option pricing is an active field of research. This project has the goal to examine possible ways to improve an established method of numerical pricing. The method is based on an adaptive finite difference method in price and uses the backwards differentiation formula of order 2, BDF2, in time. The project will focus on improvements to the time integration through implementation of discontinuous Galerkin methods, dG. Empirical convergence and accuracy results are obtained for equidistant dG-methods up to order 3 and performance is compared to BDF2.

This thesis compares four relevance feedback methods. The Rocchio and Ide dec-hi algorithms for the vector space model and the binary independence model and Okapi BM25 within the probabilistic framework. This is done in a custom-made Information Retrieval system utilizing a collection containing 131 896 LA-Times articles which is part of the TREC ad-hoc collection. The methods are compared on two grounds, using only the relevance information from the 20 highest ranked documents from an initial search and also by using all available relevance information. Although a significant effect of choice of method could be found on the first ground, post-hoc analysis could not determine any statistically significant differences between the methods where Rocchio, Ide dec-hi and Okapi BM25 performed equivalent.

Lame dogs are a common group of patients for the practicing veterinarian. In the literature it is described how a clinical examination can be performed, based on general clinical-, orthopedic- and neurological examination, and visual evaluation of the dog when standing and during motion. For research, objective gait analysis systems are also used to study clinically healthy and lame dogs during motion. The aim of this degree project was to compare objective kinematic gait analysis with a visual evaluation of dogs with different types of lameness. The project was a pilot study to show if objective gait analysis could be used as a support for the visual examination. Ten lame dogs of different breeds and with different diagnoses were included in the study. They were all patients at the University Animal hospital, Uppsala.

In companies today, it is becoming more and more common for employees to work in a project based environment, as a result many companies have developed their own project models. Companies with a well developed product culture are striving to improve their existing models, and businesses relatively new in the marketplace are aiming to reach a high level of maturity as well as reach high levels of efficiency in the shortest time possible. As the number of mature and efficient companies with well developed project model increase, so does the level of competition in the market. Since a well developed project model often leads to a more efficient and accurate way of carrying out the project, which in turn leads to shorter delivery time towards the client. This is crucial as time is one of the most valuable parameters of competition in today?s business environment.

Denna studie syftar till att utveckla tumregler för heuristisk utvärdering av typografi i responsiva gränssnitt. Genom att kombinera traditionella typografiska designprinciper med principer för responsiv webbdesign har tolv tumregler tagits fram. Dessa tumregler har i två heuristiska utvärderingar använts av grafiska designers och gränssnittsutvecklare. De båda grupperna har dessutom fått ge sin syn på upplevelsen av att använda tumreglerna. Tumreglernas förmåga att vägleda till hittade typografiska problem i två responsiva gränssnitt har analyserats och framförallt gränssnittsutvecklarnas resultat har varit i fokus, då målet varit att tumreglerna ska kunna fungera som ett verktyg för att skapa bättre design för gränssnittsutvecklare utan utbildning i ämnet.

Shear Strength and Deformation Characteristics of Uppsala Clay with CRS and Standard OedometerTyra Morell Bonin & Magdalena MählerTo see how much a clay compact under different pressure one can use several different methods and in this project, two methods were used, the Standard Oedometer and a CRS apparatus. A Standard Oedometer is a full-time manual device and the CRS apparatus is a modern electric and automatic device. The aim of the project was to see similarities and differences between the two methods and examine which method that were most reliable. This has been done with repeated laboratory tests and afterward evaluations. With this information one can get a picture of how the clay will behave and how it will deform in nature.

This master thesis has been carried out on behalf of Stoneridge Electronics AB and is an investigation ofhow intelligent switches can replace the traditionally used direct controlled switches. The concept ofintelligent switches is that the switches contain electronic identification components which, by connectingthem to a network, give the same function independent of the location of the switch. This infers anincreased flexibility and configurability which can be a great advantage in development, production andcustomization in the commercial vehicle industry. Especially in the current situation when commercialvehicle manufacturers provides more and more functions and dashboard configurations.LIN (Local Interconnect Network) is a network protocol introduced in 1999. It is a simpler and lower costcomplement to CAN (Controller Area Network) and is adapted for applications where the demands forbandwidth are lower, for example reading sensors and switchers.

AbstractThis paper discusses how system development methods today support communication between system developers and their customers and end users. Today there are many system development methodologies with different aims and emphases. It is difficult, however, to find among these methods those who promote good and effective communication with customers because so many of these are very technically rooted and not as much directed towards the soft aspects of systems development - i.e. Human aspects. Our own experiences tells that a simple interview can be initialized without us having an idea what to ask the customer about or how to structure it up - nonetheless it?s done, but the outcome is just chance.

The paper is a thesis made by three students in the engineering program at Jönköping School of engineering. The thesis was overseen by the urban planning office and features data from Jönköping County.The purpose of the thesis is to improve future central districts by improvement of work methods. The aim of this thesis is, through an evaluation of process mapping, develop a model for systematical work methods with better experience feedback in the urban planning. The following three questions have been answered:? How is the process mapping of the urban planning in Jönköping County built today and how did it affect the current district Kålgården?? How can the urban planning of Jönköping improve with a more systematical work method with better experience feedback?? How can critics elaborate the developed method to make it enough stable and in general applicable method to enforce on future districts?Literature studies and interviews were made to review the work methods of the office of urban planning as well as how their experience feedback works.

Systems development methods mirror different organizational perspectives, and not all methods are formalised, but what they have in common is the purpose of structuring and supporting systems development processes. Which method would be the most suitable may be determined by the systems development context at hand, because every systems development context is unique. Information is a valuable asset in today?s organizations, and it needs to be protected against both internal and external security threats. In our essay we aspired to find and present suggestions as to how systems developers can include security in the very design based on formalised systems development methods to create systems that are better prepared to meet the security challenges of today.

Students who regularly cause trouble in school, how can they learn anything? That is what we asked ourselves after having visited a special school for ?troublesome students? (in Swedish resursskola). Our main purpose has been to find out how these students have experienced the help they have been given in those schools.We have interviewed students, parents and a social worker in order to find out if the alternative pedagogical methods used by those schools give the students better opportunities to perform their schoolwork. The interviews have been made two or three years after the end of their studies in compulsory school (grade 9). We have used a qualitative method with semi structured interviews and also an evaluation model.

When constructing a road the risk of emission of substances from the used materials to the surrounding environment has to be evaluated. The aim of this study is to present a proposal for how to evaluate the risk of contamination as a result of emission from the materials in a road construction. The study is based on literature studies, an inventory and a questionnaire that examines how experts in governmental agencies, industries and universities evaluate the risk of contamination. The inventory indicates that guidelines for evaluating the risk of emission from secondary materials in a road construction do not exist. The conclusions from the questionnaire are: that there is no common way to evaluate the risk of contamination as a result of emission from materials in the road construction, there is no uniform interpretation of the terms "minor" and "significant" risk of contamination and that the evaluation is subjective.

This thesis describes the evaluation of a prototype (Illustrator) for future simulator training of Within Visual Range - combat in the Swedish Air Force. The main focus was to collect and transform user acceptance data (expert opinions) to useful guidelines for continued development. Thirteen active fighter pilots participated in the study. The aim was to use expert opinion to study a) the psychological user acceptance, and b) the technical user acceptance, of the Illustrator together with c) gathering opinions for future improvement. Three psychological aspects were rated before and after the sessions to measure psychological user acceptance.