The purpose of this essay was to research the level of condition and requirements of democracy which faces states applying for a membership in the European Union. The focal point was to research the levels of democracy requirements on two set enlargements which are the cases of the 1981 and 1986 enlargements together with the 2004 and 2007. The states that did reach the goal of becoming member states had similar political backgrounds that made them suitable for a most- similar system study. By using my theoretical framework which consists of democracy theories, together with the chosen method was I able to find answers to my research questions when examining the material. The result of the study is that even though the condition might have been quite similar but the reality of them was different.

Background: Alzheimer?s disease belongs to the largest group of dementia and stands for the half of those 37 millions persons whom are affected of dementia in the entire world. Alzheimer?s disease affects the patients with changes on their behaviour. It is important as a nurse to prevent that the symptoms increase.

Background: Many companies have outsourced their IT-operations and their expectations of what this IT-outsourcing will contribute to the business are high. Cost cuts are not always a natural outcome of IT-outsourcing. Many companies that have outsourced their IT-operations consider it to be problematic and complex to exercise management control and reach cost control which was the purpose of the IT-outsourcing. Purpose: To describe and analyze what affect IT-outsourcing has on a company?s management control system and a company?s possibility to exercise cost control.

This master thesis was written for Arla Foods and the result of the thesisserves to gain Arla Foods in its work with chemical hazardous and to bringnew academic results. The thesis aims to create a common methodology forrisk analysis with the handling of chemicals.The theories displayed in this thesis focuses on different risk managementmethods in order to build up a framework out of which a risk management toolwas created. The main primary data source consists of interviews held withemployees within Arla Foods at different facilities.The risk management tool can be found in appendix K.Available recommendations for how to evaluate risks with chemicals can befound at appropriate government agencies. These recommendations aredrawn up to suite small and medium enterprises and therefore are to narrowto make a good foundation for analysing chemical risks at large companies.With the legislation and government demands in mind, a tool has beencreated to fit a large company?s needs when managing chemical risks.

The demands of environmental effects in today?s companies have been increasing more andmore. To be able to withstand customers, cooperatives and government demands the ISO14001 certification should not be neglected.In January 2007 the general management of SAS decided to introduce an environmentalmanagement system for SAS Tech. The work which has been carried out is a part of thecertification process of ISO 14001 which will be completed by the end of year 2009.The aim is to create auditroutines for the company in order to be able audit ISO 14001standard internally which is a demand to get certified and to keep the certification in thefuture. A schedule has been done which audits different part of the standard at every auditduring one year.

The aim of this study is two folded. We wish to investigate if there is a value premium from hedging jet fuel exposure for American and European airlines. We also seek to answer if airlines can affect their probability to default by using Risk Management. During the period 2003 ? 2006 there existed a value premium for airlines that hedged their expected future consumption of jet fuel.

Vinderosion på jordbruksmark har länge varit ett välkänt faktum trots att någon utförligare undersökning om dess omfattning och skadeverkan inte tidigare genomförts. Mot bakgrund av detta har därför ett nordeuropeiskt projekt, WEELS (Wind Erosion on European Light Soils), dragits i gång som syftar till kartlägga vinderosionen på sandig jordbruksmark i norra Europa och som man i slutändan hoppas ska kunna resultera i en vinderosionsmodell. Detta har genomförts med SOIL modellen, en matematiskt fysikaliskt baserad modell för simulering av vatten och värmeflöde i en skiktad jordmånsprofil..

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

There is an uncertainty in the market for grain forcing the meat/milk producers to review alternative feeds to a larger extent, in order to get control over the feed costs. This has led to that the meat/milk producers need to have a good knowledge regarding how the different feeds influences the animals and which technical equipment to use for handling. For those that produce their own feedmix, there is a need to put interest in new crops and their characteristics to be able to get the knowledge of what is required for their own production. It is beneficial to keep an open dialogue with advisors to be updated in new crops and new technology for feeding. When mixing feed at farm level, the legislation is not very clear since it the target group is large scale mixing plants. We have brought up the most important rules and regulations from the EU parliament Council as well as the ones from the Swedish Board of Agriculture (SJV), regarding feed mixing on farm and factory level. We have studied beans and pea at two different moisture levels, in order to evaluate how the moisture level affects the distribution of particles when milling with a plaitmill and a hammermill.

Tolerance and resistance are two different defence mechanisms within the immune system that differ from each other in many ways: However it is not clear which of the two is the most advantageous in dairy production. Resistance is described as the ability to fight a pathogen in a host. Tolerance is, on the other hand, not aggressive to the pathogen per se, but rather protects the host and its tissues. Furthermore tolerance rather offsets the toxin from, for example, a parasite whilst resistance offsets the parasite itself. Resistance is however disease specific, which means breeding for a large number of diseases is needed in order to make resistance worth the cost for the host.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.