The purpose of this study is to investigate how to use remote sensing data when making a forest management plan. The main focus of the study is to compare different methods to identify forest stands of a forest property, and by manual measures and estimates try to evaluate the quality of interpreting data. This report is based on survey questions sent to five different organizations working with remote sensing data. Only two of these where willing to participate in this investigation. The organizations where asked to analyze the same forest property and divide into compartments and make Estimations of volume, basal area etc. in every stand.

A new material model, for the FE-program ADINA, has been verified against twoexperiments. One unreinforced concrete beam and one reinforced concrete beam.The model, DF-concrete, has the possibility to estimate true concrete. However theresults indicate that in order to be sure that the Estimations are true, there ought tobe data from the true concrete to verify against.Two FE-models have simulated the behavior of a ring-shaped part of the nuclearcontainment vessel. The results from the first, frictionless, model agree with similarsimulations and hand calculations for high pressures in the containment vessel. Thesimulations of the nuclear containment vessel show cracking in the concrete after10-11 bars of over pressurization.

In the automatic manual transmission system, Opticruise, the choice of gear is based on several parameters such as road incline, driving resistance and vehicle mass. Many different mass Estimations are made during driving. A final vehicle mass is then used to determine the current gear. Construction vehicles are often not equipped with air suspension and can therefore not estimate the vehicle mass when standing still. If that sort of vehicle is reloaded while standing still an incorrect mass estimation will be used and as an effect of that also a wrong gear.

The evaluation of the function of the feeding of sheep herds is suggested to involve the work effort, the fulfilment of the nutrient needs of the sheep and the feed waste. Mechanisation of the feeding can be very simple or include high degrees of mechanisation. Three different farms, representing different levels of mechanisation are presented. Descriptions and analysis of the feeding systems including mechanisation, work effort and Estimations of the feed waste are made on each farm. The herd with the most advanced feed mechanisation included a rolling feed band and mix wagon. The other farms were partly or little mechanised including ad lib feeding from big bales and manual distribution of hay and concentrates. The most mechanised farm was able to feed a large herd of sheep at a low work effort and little feed waste. However, the investment in machinery has to be weighed against the improved efficiency.

This thesis explores some issues regarding Estimations of the cost of capital on the Stockholm Stock Exchange through reverse engineering of the Residual Income Valuation model and through usage of the Capital Asset Pricing Model. Previous studies are in conflict of whether the risk premium changes considerably over time or not. Furthermore, the risk premium estimated by CAPM tends to be fairly stable. In this study, reverse engineering of the cost of capital implied by analysts? forecasts shows a significant difference in the risk premium over time.

Sydkraft Vattenkraft AB owns and operates the Traryd hydropower plant, located in the river Lagan in the southern part of Sweden. The gravity dam is classed according to RIDAS guidelines (Hydropower Industry Dam Safety Guidelines) as a class 1B dam. This means that the dam must discharge a class 1-flow which has a return period of 10 000 years. The inflow into the dam has been calculated in an earlier report to 495 m3/s, with a waterline at an elevation of 126, 3 meters above sea level. The gravity dam has a discharge system with two rectangular weirs, which results in a smaller discharge than the necessary 495 m3/s.

Osteological analysis was carried out on skeletons from nine graves from a medieval cemetery in Ny Varberg, Varberg, Halland. The graves originate from a monastery and a church, dating back to the fourteenth and fifteenth century. The main aim with this thesis has been to study health through the presence of pathologies and skeletal changes. Further aim was to compare the results from the present study with theresults from Torsten Sandbergs analysis of the same material from 1964. This comparison later showed coincidence.

Since energy simulations are used to verify that projected residential buildings will reach the current energy requirements it is important that the results are reliable.This report investigates the extent of uncertainty in energy simulations, estimates the causes of the uncertainty and its economic and environmental consequences.The method used in this report is based on three validation methods; empirical validation, analytical validation and comparative validation. The analysis was carried out for five multi-family dwellings in Uppsala with installed meters for energy measurements. One of these objects, Klockarlunden, was studied in more detail than the others.The results show that the deviations are between 10 and 29% for the studied objects, which means that the uncertainty is estimated to be at least 29%. All simulations underestimate the buildings need of energy. The simulation for Klockarlunden can predict the energy consumption to be within the range of 46-98 kWh/m2year with 90% confidence level based on the current uncertainty.

This essay is an evaluation of the act of establishment (2010:197). The act is about different operators' responsibility and accountability for new arrivals to get a more effective integration into society and to speed up the new arrivals' establishment on the labor market. The purpose of this act is to get more new arrivals involved in the Swedish labor market directly. By doing so, it gives these people a possibility to become self-sufficient. This study has focus in four different operators; Employment service, Immigration service and two local politicians from Social democrats (Socialdemokraterna) and Conservatives (Moderaterna).

The cost of forwarding corresponds to about one tenth of the forestry industries raw material cost. This gives a motive to do good follow-ups to get a good overview of the forwarding distance and, thus, enable improvements. Follow-ups are also justified by the possibility to make more accurate calculations of the harvesting costs, if better Estimations of forwarding distance are achieved. Today (2009) Stora Enso has GPS and vehicle-computers in most of their forwarders. These are used mainly for the forwarder to follow the tracks of the harvester and for the planning leader to see how the forwarder has been driving within the stand.

This study examined some contradictive results in a report from the Swedish board of Integration. The contradiction was concerning the Swedish populations dismissive judgments of experience a shared ground of values between the Swedish society and those witch are generally held within Islam. These dismissive judgments were given at the same time as the population reported to have a lacking knowledge of Islam in general. To test for psychological aspects of these contradictions, the analysis was based on the theoretical ground of Social Identity Theory and Theory of Attributions. The study used an existing survey that examines people´s Estimations of their own and other members of society´s fulfilling of democratic values.

Large amounts of birch-timber are imported to Sweden, from particularly the Baltic States, since the domestic production can?t support the pulp industry. The goal of this study was to show the potential of birch and the area?s most suitable for birch production. The study was limited to Gävleborg County. Using site characteristics, site index (SI) for birch was estimated on all National Forest Inventory plots in Gävleborg County.

The purpose of this study is to examine how Viking Line, Tallink Silja and Birka Cruises work with economic and environmental sustainability, and also to see how they work with new environmental legislations. In 2015 a new environmental legislation will be introduced, by the name Sulphur directive. The Sulphur directive entails a reduction in Sulphur dioxide emissions from ships where the emissions cannot exceed 0,1 percent. There are three alternatives to achieve the new environmental legislation, the use of Marine Gas Oil, LNG or scrubbers. All three alternatives will lead to increasing costs for the shipping industry.

During the last decade a new technique in animal breeding has developed called genomic selection. It is based on Estimations of the effect from genetic markers on traits that are calculated in a reference population. By genotyping individuals, genomic breeding values can then be estimated without phenotypic observations. The aim of this essay is to investigate the response of genomic selection on breeding schemes for dairy cattle. The accuracy of the genomic breeding values is affected by the proportion of observations included in the validation set and how often the equation for estimating breeding values is reevaluated.

The aim of this report was to quantify the accumulation of carbon dioxide (CO2) and methane (CH4) in ice-covered lakes in winter (October-March) during three consecutive years, and to assess whether the concentrations of DIC and CH4, as well as the ratio DIC:CH4 differs between years and between lakes affected by clearcutting and untreated reference lakes. Water- and gas samples were collected from four boreal lakes (two affected by clearcutting and two untreated reference lakes) located in Västerbottens inland in spring. The lakes were found to accumulate on average 91, 55, and 84 mgCm-2d-1 during winters 2012-2013, 2013-2014, and 2014-2015, mostly originating from CO2. The concentrations of DIC (autumn and spring) were higher in the affected clear-cut lakes compared to reference lakes for all years, including the reference year (2012-2013) before clear-cutting. No such difference was found for CH4 or the ratio DIC:CH4.