The aim of thesis was to, through a action research study and through individual interviews with five students, clarify their perspective on educational assistance in high school. The study shows that students prefer teaching in small groups outside of regular whole class because it gives the them access to the factors they consider crucial for a functioning support-time whit a skilled and dedicated teatcher, in a calm and safe environment. Moreover, the students claim the importance of technical Equipment especially in the Swedish subject, but also in other subjects. Today the educational assistance varies from an outside-the-class teaching situation to a whole-class situation with teacher support as well as technicaal Equipment. When the student were asked to describe the cinditions under which studies can be conducted with the whole class they tried to imitate the learning environment they have in a small group.

Holmen Skog is currently using a GPS-program called TraktInfo, originally developed within the company. They are now planning to switch to a new GPSprogram or allowing the contractors to buy other programs available from the logging Equipment manufacturers. To be able to offer this flexibility, Holmen Skog needs to obtain information about the features offered by the different manufacturers in their specific programs, and also when the manufacturers are planning to start selling programs adapted to the new standard called StanFord2010. According to the study, the manufacturers are hesitant to StanFord2010 and there has also been a lack of clear signals from the customers and clients about what kind of different new features to include in the programs. The feature most frequently used by forest machine operators today is the option to keep record of the harvester?s path by creating a ?log plot?. This feature was not used to its full potential however, since only one out of eight of the forwarders included in the study had computers that were compatible with the harvester?s computer.

ABB is one of the world?s leading engineering companies in power and automation technologiesand their solutions improve performance while lowering environmental impacts for energycompanies and industries. ABB FACTS designs Equipment and plants for series and phasecompensation.This thesis has been performed at ABB FACTS on the Mechanical Design (DM) department inVästerås, Sweden. The purpose of the thesis was to develop and design calculations andsimulation tools for ABB FACTS?s standard series capacitor platforms.

This work covers a broad analysis of the risks that could impact the achievement of electrical safety of electrical installations. The work includes both electrical Equipment such as the installation of electrical Equipment.The report illustrates the main technical characteristics of electrical connections greater than 10 mm2 and provides an introduction to the crimping systems for copper and aluminum conductors. In addition to that analyzes the factors that are important to assure the quality of an electrical connection throughout the value stream in terms of both materials such informations. Furthermore analyzed deeper the need for skills development of technicians and other staff.The different parts of this work are analyzed and presented, in theory to studies carried out both at Elpress AB and partly with the help of other scientific reports dealing with similar subjects. In addition, presents a survey that will help understanding the current perception of the electrical connections and cable crimping systems among end users.

This master thesis is an in-depth study of an existing heating system at a household cooperative in Uppsala that has been converted from district heating to a bedrock heat pump system. The study focuses on an economical system optimisation of the building?s complete heating system. The aim was to determine how well a heat pump system in large buildings actually work, find out possible ways to optimize the existing system and point out important system parameters for new heat pump installations in larger buildings.The project points out a possible energy cost reduction of 45 % without investment and further cost reductions with Equipment investments. A reduction by 30 % is possible by improvements in the regulation system and 15 % is possible by maintaining the brine system.

To get the maximal output of your exercise in gym machines, there are different factorsto be considered. For example the strength of the muscle varies dependent on the positionof the muscles. To get the best results of the exercise the load has to reduce and increaseat specific positions.This study was made in cooperation with Caretaker Scandinavia AB, a company forsales, marketing and development in health care. They are general agent for Nordic Gymwho works with manufacturing of Equipment and machines for gym and fitness.The aim of this study was to generate a method of measurement to evaluate and controlthe biomechanics of Nordic Gym´s workout Equipment. A protocol for an ergonomicanalysis on the Equipment has also been elaborated.One of the methods to measure the biomechanics was to measure the torque through thewhole movement.

This Thesis in Military Technology deals with experiences drawn from the forced introduction of Weapons Station 01, 2009. The work aims to identify the experiences regarding the forced procurement of military Equipment to see how they can develop normal and fast procurement of Equipment. The main conclusions of  this work, is to achieve greater capability and increase the military utility, are: -          Common objectives and priorities of stakeholders-          Response and joint types shall determine requirements for system-          Ensure an integrated project team also at lower levels-          Engage the integrated logistic support early in the materiel process-          Include Armed Forces staff as early as possible in the testing and validation-          Prioritize work to facilitate the rapid development of decision on use (BOA)-          Provide back up for increased redundancy in the mission area .

Historically transformers with system earth Equipment have been modeled as open circuits in zero sequence. This approximation has been satisfying, but lately it has been discovered that Equipment on one side of the transformer have responded to faults that occurred at the other side. Most of these problems took place when the majority of the system on the secondary side of the transformer contained cables. These findings have led to questioning whether or not the former model of the transformer in zero sequence is correct. This report investigates if it is necessary to represent the transformer in zero sequence in another way than it is usually done today.

Animals can be ill and need veterinary care for many reasons. The conditions can be more or less emergent, some can even be life-threatening. When an animal is in a life-threatening condition you can save the animals life just by having the right Equipment near-by and ready to be used. This literature-study help you, as an active working veterinary nurse, with which these conditions are that can show up in your emergency ward and what you should have near-by to give animals with acute life-threatening conditions the care they need. The author also looked at work tasks at the emergency ward and found out that in Sweden it is not defined who can and/or should execute them. Interviews were also done with nine of the largest small-animal hospitals in Sweden to compare the studies found with the Swedish emergency wards.

This master thesis is made of two parts. The first part concerns the method and results ofdesigning a motion control system for a piece of research-Equipment called BIRGIT. TheEquipment is made to be used for research on eyemovements. In the second part, a computermodel of a part of the balance organ in the inner-ear is developed. The work has been done atthe Bernadotte laboratory at S:t Erik Eye Hospital.The Equipment the control system is made for is a so-called rotationchair.

Detta examensarbete har utförts i samarbete med Svedala Compaction Equipment AB. Examensarbetets primära mål var att reducera höjden på ROPS tillhörande asfaltvält CC 422. En sänkning medför ett friare vägval och billigare transporter. Hittills har vägvalet påverkats av broar, viadukter och andra hinder. Med hjälp av riktlinjer från Svedala Compaction Equipment AB och Fredy Olssons modell för integrerad produktutveckling togs kriterier fram, vilka användes vid bedömning av olika lösningsförslag.

The subject of this bachelors degree project is an interior layout for road ambulances.Landstinget Västernorrland (LVN) wanted a layout concept that would be used to com- municate their design intentions to the ambulance producers during their purchase process.Designing ambulance interiors is an extremely complex process since there so many fac- tors to take into consideration. It ?s not just about taking the Equipment and place it where there is space left in the cabin. You have to start with the user in focus and the tasks that are to be performed in the ambulance environment.It ishard to find design solutions that will fit 100% of the ambulance personnel?s working routines for 100% of the tasks.

This degree project has been carried out in cooperation with Gedevelop in Helsingborg.Gedevelop has developed a camera that can calculate the weight of a liquid glass mass.Because of the density and viscosity changes in the glass, the weight information issometimes incorrect given. Glass industry is today addressing the problem by an operatorperforming a manual weighing of a few bottles which, in turn, calibrates the camera system.The project aimed to develop an automated system to control the weighing of glass bottles forglass industries. This system must be so flexible that it can be easily mounted on plants withdifferent production Equipment around the world.The project includes design and construction of Equipment that meets the requirementsformulated together with Gedevelop. Work has been done both in Halmstad and Helsingborgand has included both calculations and review of the theory to understand the forces thatinfluence the design of different construction parts. A prototype was produced that meets theoperating requirements for the design and can be used in testing features.

The moisture content in 10 deliveries of tree parts and 10 deliveries of wood residues were measured with different methods to analyze the quality of procedure used at Dåvamyran today. At the same time a survey was made on the measure procedures used at heating plants in Sweden The majority of the heating plants in Sweden use weight and moisture content as base for payment but at some plants only volume. The moisture content is usually estimated by drying wood chips in an oven but few plants a visual estimation is used. At few plants moisture content is estimated spectroscopicily. The techniques using near infra read light and other electromagnetic are still at a test stage. The methods of measurement used today are quit unreliable for the individual deliveries and there is a risk for systematic mistakes.

Detta examensarbete har utförts i samarbete med Svedala Compaction Equipment AB. Examensarbetets primära mål var att reducera höjden på ROPS tillhörande asfaltvält CC 422. En sänkning medför ett friare vägval och billigare transporter. Hittills har vägvalet påverkats av broar, viadukter och andra hinder. Med hjälp av riktlinjer från Svedala Compaction Equipment AB och Fredy Olssons modell för integrerad produktutveckling togs kriterier fram, vilka användes vid bedömning av olika lösningsförslag. Utvärderingen resulterade i att två av de tio ursprungliga förslagen gick vidare till nästa steg i produktutvecklingsprocessen - primärkonstruktion. Primärkonstruktionen inleddes med vidareutveckling av de två principförslagen.