Radio Frequency Identification, RFID, is a convenient way to enable contactless identification which does not require any physical nor optical contact. As with any radio-based communication the signal can be intercepted, thus making the technology vulnerable to several kinds of attacks. Interception of communication is not the only threat. Since RFID tags might contain personal information or information that will grant the owner access to secure areas, skimming and spoofing attacks are also major threats against this technology. In this thesis report,  the perspective of an adversary is portrayed in an RFID-enabled environment by presenting where RFID is used and how it could be abused.

The report begins with a general inventory of possible technical faults in a hydropower plant and of possible fault indicating measurements. Then an investigation is made concerning a few different faults. Based on this investigation a choice on seal box condition and water leakage is made as problem for a more thorough examination, in which it is concluded that the turbine water leakage is larger when the turbine is put into operation. The examination ultimately results in a computer alarm for faults related to the seal box. Finally a few things are mentioned about flow measurement and pressure measurement in relation to the project as a whole..

The purpose of this report was to investigate what characterizes a good psychosocialwork environment, and whether it may have impact on a vessel's safe voyage. Thisreport is proposed to increase the understanding of what creates a good psychosocialwork environment and its potential effect on safety at sea. In order to find out thesuccess factors for a good work environment group interviews were conducted in socalledunstructured focus groups. During these conversations, the participants discussedfreely by the question "what is a good psychosocial work environment for you?? Thesuccess factors were thereafter applied on selected accident reports, to investigate theextent to which they were represented and taken into account.The results of the study show three categories of factors: colleagues, communicationand competence, where colleagues are the main contribution to a good psychosocialwork environment.

This report has a dual focus. The first goal was to increase the knowledge of how the use of electricity in a residential building is distributed. Electricity in residential buildings is used for lighting in common areas, elevators, pumps and many other appliances. The electricity used for these different parts is to a great extent unknown. A few studies have been carried out and the result of these is referred to in this report.By means of measurements and approximations the use of electricity for various appliances became known.

Detta examensarbete är ett projekt som utförts på uppdrag av Sunnex Equipment AB. Syftet var att utveckla nya ledade armsystem till en medicinsk belysning för att ersätta de tre armsystemen som marknadsförs av företaget idag. Det var även önskvärt att projektet resulterar i ett förslag på utformning av ett tillhörande lamphuvud. Fokus har varit design och ergonomi. Arbetet har följt en strukturerad produktutvecklingsprocess som inleddes med informationsinsamling genom användarstudie, intervjuer, konkurrensanalys och litteraturstudier.

This essay consider ritual death during the ironage, and through a presentation of historical and archaeological sources. Considered ritual death I think we should study both historical and archaeological sources, to get a vider view and a new perspective. To make the essay easier to understand I have split up the early and the late Iron Age in the discussion. In order to study the ritual death I have shown archaeological examples like bogsacrifices in the early ironage, and decapitated victims in the Viking society. The victims have been considered as slaves by some archaeologist.

Den här rapporten avhandlar arbetet med att ta fram ett förslag som förlänger Volvos kärnvärden - kvalitet, säkerhet och miljöhänsyn, ut i Utvecklingsverkstaden på Volvo Construction Equipment, Hauler Loader Business Line, i Eskilstuna. Förslaget är utformat som ett koncept, som ska kunna överföras till andra verkstadsmiljöer på Volvo, om så önskas. Idéförslaget har baserats på en studie av den befintliga Utvecklingsversktaden. En modell av verkstaden i skala 1:50 utformades som presentationsmedium.Vid examensarbetets slut har förslaget presenterats och utvärderats av målgruppen. Den primära målgruppen har varit de anställda på avdelningen.Slutsatserna av arbetet är att en informationsbärande interiör kan formges för att representera ett företags kärnvärden och visa på innovation och framtidstänk.

Through the entry of web 2.0 the technologies behind web development has changed dramatically. Asynchronous JavaScript and XML (AJAX) is the umbrella term for different techniques that make it possible to build rich and interactive user interfaces in today?s web browsers. Service Oriented Architecture (SOA) describes how common services can be bundled and published so they can be consumed by different systems.The company SYSteam Evolution AB, which has requested this project, wanted a web application that shows a graphical activity chart in order to easier view ongoing projects. The goal for this project is to develop a demo platform that shows how AJAX and SOA can be used to create flexible and reusable applications.

Radio Frequency Identification, RFID, is a convenient way to enable contactless identification which does not require any physical nor optical contact. As with any radio-based communication the signal can be intercepted, thus making the technology vulnerable to several kinds of attacks. Interception of communication is not the only threat. Since RFID tags might contain personal information or information that will grant the owner access to secure areas, skimming and spoofing attacks are also major threats against this technology. In this thesis report,  the perspective of an adversary is portrayed in an RFID-enabled environment by presenting where RFID is used and how it could be abused.

This master thesis was a continuation of a previous study in the diesel exhaust characterization, which is part of the academical work embedded in the EMIR-1 project. The main objective of this thesis work was to finish the installation and make the proper modifications of the particulate mass measuring system located in one of the engine test cells at KTH, in order to be able to measure the mass of the particles from the exhaust of diesel engines.This experiment requires a diluted flow sample from the exhaust that should be sent to the device that makes possible the measurement of particle mass, called TEOM. In the first stage of this project, the objective was to study and make the proper modifications in the existing KTH diluter because there were several problems to obtain a constant dilution ratio from it during tests.This modifications were made and it resulted in a great improvement in the maximum inlet and outlet flow that this diluter can handle. Therefore another modification is proposed for controlling the inlet exhaust flow so it will be possible to regulate the dilution ratio and make it constant along a wide range of engine loads and speeds.The second and most important stage was to make particulate mass measurements possible by analyzing the frequency signal from the TEOM device. The idea was to obtain the frequency of oscillation from the tapered element in the TEOM, and therefore with the proper correlations, be able to predict the particulate mass concentration in the exhaust flow from the engine.An electrical problem in the TEOM circuit was detected and corrected, so the signal that carries the frequency from the TEOM can be analyzed properly.

This master thesis is one part of a project, called ?StabSim?, with the purpose to develop a simulation model for the align and stabilisation system in main battle tank 122. The origin of this project is that it should be possible to make control analysis without risking any hardware. Besides that it will be easy to change components in order to investigate the behaviour of the system. The report includes modelling of tower and weapon mechanics and also the modelling of the synchronous motors, which control these.

During the last decennium climate issues have become more and more important. Many steps towards an adaption of efficient energy supply systems have been taken all around the world. These steps have been created to ensure the next generation?s energy demand. In EU and Sweden objectives have been set to ensure that the energy consumption decreases by 20% year 2020 and by 50% year 2050 compared with the energy consumption levels of year 1995.

 Studien undersöker skillnaden i informationsbehov mellan noviser och experter i en monteringskontext samt om de fel som sker i produktionen kan härledas till noviser respektive experter. I tidigare studier skiljer sig en expert från en novis i många avseenden, bland annat snabbhet, informationsanvändning samt precision. Olika informationsprocesser är också kopplade till noviser respektive experter. Experter har övat in ett automatiskt beteende medan noviser har medvetet informationsbeteende. Referensföretaget som studien utförts på har problem med höga interna rejekt, alltså antalet fel ökar också i samband med semestern och nyanställningar.

This report has a dual focus. The first goal was to increase the knowledge of how the use of electricity in a residential building is distributed. Electricity in residential buildings is used for lighting in common areas, elevators, pumps and many other appliances. The electricity used for these different parts is to a great extent unknown. A few studies have been carried out and the result of these is referred to in this report.By means of measurements and approximations the use of electricity for various appliances became known.

This report is based on a thesis that was carried out during spring 2012. The report covers the development of a preliminary study to Performance Sk8. The purpose of the study is to facilitate and contribute inspiration to Performance Sk8 to run an automation project to bring home their production to Sweden from China. The reason is to gain a greater ability to control quality, produce smaller batches and reduce the cycle time to reduce costs.The goal is that the preliminary study shall meet the requirements and wishes Performance Sk8 and other partners defined. The pre study will contain different cost proposals for the automation of selected process and serve as a basis for procurement of the equipment.The pre study has resulted in some proposed solutions to the various steps required to automate Performance Sk8 ?s production.