This study describes and reviews horse stable equipment from companies who builds and sells the equipment. In the study the companies various equipment was compared with regulations in the law of prevention of cruelty to animals. The purpose with this study was to find out if the companies stable equipment are approved according to the regulations within this area. The study used at five randomly picked companies.This study showed that three of the five examined companies refered, in one way or another, to the law of prevention of cruelty to animals on their website. Unfortunately not any of the companies referred to todays existing law of prevention of cruelty to animals.

Swedish Trotting association was formed in 1925. They are the ones who design the regulations concerning what is permissible and not permissible for the horse, driver and trainer, when they have a license at a Swedish racing track. The Veterinary department of Swedish Trotting association decides in consultation with representatives from veterinaries around the country what is allowed and not allowed, based proven experience, combined with the availability of scientific data and Veterinary Department's own assessment. After stricter regulations for good animal welfare from the Swedish government, Swedish Trotting association is going to work out a workable model for how new equipment can be tested in the future to see how the equipment affects the horse. In the future, all equipment will be objectively tested before approved. The purpose of this work was to develop a well-functioning model for this. The research-question for this work is: Is this study design a well-functioning model of how the equipment should be tested in the future? The equipment used for designing this model was bitless bridle with a bit.

The E-department at GETRAG All Wheel Drive in Köping have problems with the efficiency on parts of their production equipment. The equipment with the most significant efficiency problems are four automated multifunctional production cells that produces housing for rear drive units. The major part of the problem is the large amount of small stops that causes the low efficiency.The department already worked with logging of interruptions and efficiency calculations before this project started. However this work was not done to the extent considered necessary for a systematic follow-up of the interruptions.The aim of this paper is to point out a more effective and systematic way to work with logging of interruptions and the follow-up. In addition the equipment were studied with a method for efficiency calculation that ? if used properly- is a more powerful and a visually better method than the one used by the company today.As the initial current state analysis of the equipment was made a lack of documented knowledge about the equipment was discovered.

This thesis describes the redesign ofequipment designed for drying bags thatis used in Fresenius Kabis´manufacturing of their nutritionmedicine in Uppsala. The need of thistask arise during the start of thedevelopment of a new packaging line werethis equipment were meant to be used. Anevaluation of the bagdryers capacity andcapability was necessary.The work started with gathering ofinformation from suppliers of the usedcomponents and from the responsibleengineers for this equipment. Aneducation to learn how the equipmentworked and how to operate it were taken.That was followed by the creation of astudy plan were the tests were plannedto test different parameters effect onthe drying result and to see if thebagdryer managed to handle the bags ofthe correct format in the pace that theequipment should be designed for.The test results detected a need ofdesigning a unit with a function thatholds the bags in place while passingthrough the dryer in order to attainhigh quality results. The results werelater used for optimization of thedesign.

After the deregulation of the Swedish pharmacy market customers can be lost due to stock-outs. Optimization of pharmacy inventory levels has thus become increasingly important. To minimize inventory costs while considering the cost of shortages the latter must be estimated. However, the shortage cost is very difficult to compute. Thus, the aim of this paper is to estimate the pharmacy-specific shortage cost parameter and its relation to other inventory costs.

During 2006 SNVDB (the national road data base for forestry) is being introduced to Holmen Skog. This data base contains all information about Holmen Skogs road systems. The information will then be used in different kinds of optimisation models which only produce correct and reliable results if the input data are of the adequate quality. Today there are reasons to believe that road data is of various qualities. The forest roads are often in a bad condition and have to be improved before a planned harvest. The cost of maintenance and construction of new roads is a large part of the total harvesting cost.

Syftet med detta examensarbete är att på uppdrag av Volvo Construction Equipment hitta en metod för att hantera och kategorisera idéflödet i deras idéhanteringssystem Interact. Den metod som användes var kvalitativ innehållsanalys. Slutsatsen är att metoden gick att använda för att kategorisera idéflödet men att ett material som sträcker sig över många ämnen tenderar att sänka tillförlitligheten på resultatet. Vidare bedöms materialet som detta arbete har producerat kunna användas för att bättre ta tillvara på idéer, vilket uppskattas av Volvo Construction Equipment..

Volvo Construction Equipment is one of the worlds largest manufacturer of heavymachinery. In Braås, Sweden, they develop and manufacture articulated haulers inseveral sizes. The biggest, the A40, is capable of loading almost 40 metric tonnes.These haulers have a bogie to distribute the forces of the load evenly onto the two axlesand there wheels. The bogie is constructed using a rigid balance beam on each side ofthe frame connecting the axles or an independent solution using hydropneumatics.An analysis has been made in order to establish the forces created during corneringand through the theory, an estimation of the extensive tyre wear and extra fuelconsumption has been made. All due to the effects of the tyres not being inline with thecornering radius.

This paper deals with archery in the Viking Age settlement of Birka and in particular the presence of Euro Asiatic, steppe nomadic archery equipment at the Birka Garrison and one Birka grave. The equipment contains for example closed quivers and a bow case. This paper also contains a discussion of archery battle techniques and tactics in Viking Age Birka and the implications of the above mentioned equipment to this discussion. The analysis insinuates the importance and status of archery in 10th century Birka..

This thesis examines the tendering process from the point of view of Swedish building contractors. The purpose with the study is to chart the decision process for the contractors during the tendering process. The study is designed as a survey study. This made it possible to reach a wide base of respondents, not letting such factors as geography being an issue. The survey itself was characterised by a very high response rate compared to other similar studies. The result from this study shows that former experience from similar projects, current workload and the clients economic condition are very important factors for both whether or not the contractor will bid for a project as well as the cost estimation and tendering price. Former experience from similar projects is also an important factor for the determination of the indirect costs.

ABSTRACTThe discussions about energy use have increased year by year everywhere in the society, and so also in the healthcare sector. But what is actually energy use in a hospital facility, and what affects it?The typical way today to express the energy use is in kWh/m2. The problem with a key performance indicator that is expressed as energy use in relation to a specific area is that it does not take into account the activity in the building. Even though the activity to a very high extent affects the energy use.

Extended Producer Responsibility (ERP) is a form of product take-back regulation that requires the producers to manage their products at the end of life. By internalising the products? entire life cycle costs into the market price the ultimate objective of such regulations is to reduce the environmental burden from the products. This Master´s thesis seeks to examine if the total life cycle cost of a product actually is borne by the producer, and if not, predict who will then take this cost. This is done by analysing the market for take-back activities in three different categories of products; electrical and electronic equipment, cars and wind power stations.

the most obvious problem at Traction today is the in-between handling that demands much time and resources. The reason is that the packages are not designed with handling in mind. Several of the packages of today also have a poor degree of utilization that means there is room for a fewer number of articles. That in turn means more packages, more transports, more storage space and more staff. On the basis of a specification of demands ? which take quality and environmental influence, as well as transport, handling and economy in account ? we have developed suggestions on new packages that will facilitate handling and lower the total costs, The time of handling will in some cases abbreviate to just a few seconds with the new packages.

This thesis describes the redesign ofequipment designed for drying bags thatis used in Fresenius Kabis´manufacturing of their nutritionmedicine in Uppsala. The need of thistask arise during the start of thedevelopment of a new packaging line werethis equipment were meant to be used. Anevaluation of the bagdryers capacity andcapability was necessary.The work started with gathering ofinformation from suppliers of the usedcomponents and from the responsibleengineers for this equipment. Aneducation to learn how the equipmentworked and how to operate it were taken.That was followed by the creation of astudy plan were the tests were plannedto test different parameters effect onthe drying result and to see if thebagdryer managed to handle the bags ofthe correct format in the pace that theequipment should be designed for.The test results detected a need ofdesigning a unit with a function thatholds the bags in place while passingthrough the dryer in order to attainhigh quality results. The results werelater used for optimization of thedesign.

The purpose of this thesis was to develop and optimize a method of analysis for combustion of organic chemical products, followed by an ion chromatographic quantitative analysis. This was to be achieved with the decomposition equipment IKA AOD 1. The aim was to receive a precise and repeatable method that would be able to be applied to the process of qualification and technical marking of chemical products at the company, OKG AB in Oskarshamn. A complete instruction for the decomposition equipment and the method of analysis was written. A number of parameters were chosen from the general method of the combustion equipment, which then was tested parallel with a simultaneous development of an appropriate ion chromatographic method.