The projects objective is to find an alternative method of heating (the current method being via electric heating) the sewage treatment plant on the island Utö in Stockholm?s archipelago in order to reduce the energy consumption and ultimately the cost for heating the plant. The project is given by ?Skärgårdsstiftelsen? (The Archipelago Foundation) and is a part of the larger EU-project ?Green Islands?.A model for the plants total heating demand is established in order to get a good perception of how much money can be saved using alternative heating methods. The heating demand model gives an annual heating demand of approximately 32 500 kWh and a maximum heating power demand of around 24,7 kW.

The project contains a force analysis of the vertical axis wind turbine Lucia's supporting arms and a measuring device to experimentally measure the forces is made. The forces between the supporting arms and the tower are calculated theoretically and then simulated by a computere. A measuring devise is then designed to measure the forces experimentally. The forces acting on the attachment between the supporting arms and the tower is primarily the centripetal force, gravitational force and the aerodynamic forces on the rotor wings. The maximum forces were theoretically calculated and is 13.38 kN along the x-axis, -0.25 kN along the y-axis and then 0.5 kN along the z-axis.

This paper investigates the internal product costing system in one of the Swedish banks with the purpose to evaluate the quality of its product costs and possible implications on decision making. The study shows that the current system distorts product costs by, among other things, using relative allocation of costs and time and by allocating all costs to individual units of products. We therefore propose an alternative product costing system, which mainly draws on ABC theory but is also adapted to the specific needs of service companies and of the Bank. This proposal is intended as a solution in this particular case and not to be generalized in other contexts. We hope however to add to the understanding of why more complex costing systems, such as the ones based on ABC theory are, according to previous studies, not widely used in practice.

In Sweden, the demand for bio energy has increased in recent years due to the current energy and climate debate. In 2008, the energy supply of Sweden was 612 TWh, biofuels accounted for 123 TWh of these. Stumps have been highlighted as a potential fuel in recent years and the Swedish Forest Agency expects a technically and biologically feasible potential of 20.7 TWh annually between 2010 and 2019. The idea of utilize stumps is not new. During the 19th century stumps were used for tar production and during the 70?s and 80?s attempts were made to use stumps in the pulp industry.

The sludgebark and to a certain extent the bark were until a decade ago waste products without any economic value that were thrown away. A number of environmental laws and increcing energy prices have improved the prerequisites for increasing the use of these materials. At Seskarö sawmill they burn the sludgebark and a great deal of the bark in the sawmill furnace. The sludgebark has a number of disadvantages compared to bark during burning. The sludgebark is often wet which means the energy net from burning often gets low.

The report examines the factors which may be a contributing cause to the problems that are present when ferritic stainless steel are eddy current tested in a warm condition. The work is carried out at Fagersta Stainless AB in Fagersta which manufactures stainless steel wire. In the rolling mill there is an eddy current equipment for detection of surface defects on the wire. The ferritic stainless steels cause a noise when testing and this noise complicates the detection of defects.Because of this, a study was made of how the noise related to factors such as steel grade, temperature, size and velocity. By observing the signal and with the possibilities to change the equipment settings the capability to let a signal filter reduce the noise level were evaluated.

The background for my thesis is the fact that with rising electricity and oil prices it becomes interesting to calculate on alternative heating systems. I have chosen to calculate upon my parents? farm, which today heats the dwelling house with wood. This is very time-consuming work, time which could be spent on other work. The main objective for this study is to compare three different heating systems to decide how they differ considering effort and cost. The result from the calculations was that grain-heating system demanded the least amount of work, but the total cost was a little higher compared to chips heating. Chips heating required half as much work as today?s wood heating and had a little lower total costs compared with the corn heating. Which system to choose largely depends on how the own work is valued.

The main goal with this thesis report was to come up with ideas of how to make the use of energy more effective and thus save money for the company.First a survey was made to find out where and how the energy consumers were divided within the company. The results were then used in calculations to find out how much money that could be saved and how long it would take to get back the investments.There is a big potential in saving money by recovering heat from the UV-lamps with a heat exchanger. It would also even out the pressure in the factory which is a source to heat loss and a cause for discomfort amongst the employees. It?s possible to save 105 000 kr in a year and the money needed for the investments is 600 000 kr.By using the recovery air more effectively the company could save up to 250 000 kr a year in lowered heat purchases, but this would require the use of automatic dampers.If you reschedule the running times for the wood chipper and invest in some kind of load management, for example Sydkraft?s ?Energidirigent? you can save at least 42 000 kr.

The aim with this report is to investigate what influence the way playgrounds are used throw the case study in Vänersborg, and also to find methods for municipalities to collect information about how playgrounds are used. The methods were observations, interviews with parents and children, a questionary with questions about what playgrounds they used, how often and why they used them and what the children used to do there. There was also a demographic investigation and documentary research. The most popular playground, Skräcklan, gets visitors from all parts of the municipality. It is located in a park with a view over the lake Vänern, there is a parking place and a café and it has furthermore a large area and many play equipments. Many of the families make shorter trips and picnics to this place. In exception of this playground, the families almost always go to the playground in their neighborhood and their part of the town.

The aim of this thesis is to describe the customer?s attitudes toward the contracting for availability, i.e., which factors are from the customer?s perspective necessary for the fulfilment of a supplier-customer agreement? Furthermore, the objective is to describe and analyse a supplier-customer relation in the Defence Industrial sphere.The present study has been carried out as a case study using an abductive approach. The thesis is based on a practical problem, i.e. which factors will be important to the customer when a contractor in the Defence Industry wants to increase its commitment of service, and how will their relationship change? The thesis is above all focused on generating knowledge that can lead to rapid and concrete measures and that can be used in the analysis of an increased industrial commitment but also as a case study of a problem of a more general nature in the Defence Industry.

On today?s competitive market, it is difficult to achieve profitability trough high prices on manufactured products. Profitability must be obtained through low manufacturing costs, high quality and short lead times. One of the companies on the market is Sandvik Coromant, manufacturer of tools and chips for metal cutting. This master thesis investigates the methods of manufacturing for boring bars at the manufacturing unit GVH4 at Sandvik Coromant in Gimo, Sweden.

Volvo in Arvika produces wheel loaders, and the production is based on forecasts. When a machine is ordered, the customer can choose what type of equipment he or she wants, and these equipments are also made forecasts on. This is made by giving each equipment an estimated procentual usage that shows how many of the machines that will use this option. Today two people are working with the forecasts, planer A in Eskilstuna and planer B in Arvika. Planer A makes a forecast based on the historical outcome and planer B then makes adjustments of this based on how many options that are ordered.

Antalet flygresor har ökat markant i världen de senaste decennierna. Detta har medfört en ökning av flygets koldioxidutsläpp som därmed har gett en ökad påverkan på klimatet. Forskning angående människors syn på och uppfattning om flyget är relativt ny och forskning rörande ämnet är mer förekommande idag än för ett decennium sedan. Tidigare undersökningar är dock i stort sett eniga om att människor, både miljömedvetna och icke-miljömedvetna personer, inte tänker ändra på sina flygvanor och flyga mindre på grund av flygets klimatpåverkan. Denna studie undersöker klimatengagerade personers flygvanor och vad de har för syn på flyget och flygets påverkan på klimatet.

The increase of complexity in embedded programming is forcing the development of higher level programminglanguages. These languages not only consist of traditional text based programming but also with graphical programminglanguages such as the programming language G from LabVIEW which is developed by National Instruments and havebeen around since the mid eighties. However since 2004 this language has also been able to program embeddedhardware, using the modules LabVIEW SDK and LabVIEW for ARM. This thesis shows how LabVIEW for ARM converts itsgraphical language G to C and then how C is flashed into the microprocessor. The thesis also takes up the pros and consof using G for embedded development.

Sustainability reports have during the last decade had a strong development. Both in terms of establishing a sustainability assurance, in its form, and get it assured together with standards, principles and regulations which organisations and accountants have utilized. The growth of sustainability reports and the choice of getting them assured have in particular favoured the accounting business. Due to this result, some critics have voiced that assuring a sustainability report gain accounting firms more than it gains the actual organisation. Other say that it is necessary in order to increase the credibility and the eligibility of the report, while it also has become a requirement from stakeholders.