Summary Today energy prices are rising. As a result biomass fuel is getting more and more interesting. Wood chips is very popular, but also straw from grain production is on the table. Lunds Energi AB project a combined power and heating plant in Örtofta out of Lund. Wood chips is meant to be the main energy source, complemented by straw. In this thesis the transportation of straw for fuel is studied.

This degree thesis is based on an assignment from BEOMAT in Storfors. BEOMAT is a company that constructs and sellsclay pigeons to both the national and international market.Our main purpose with this paper is to find a solution/system that can replace the expensive and space demandingOlympic trap facility. Our solution will replace fifteen clay pigeon throwers with one automatic thrower whosimulate all throwers together. The system will be provided with an appropriate control system for mass productiontherefore this system needs to be user-friendly so no previous knowledge is required.Totally 405 different throw coordinates will be stored in the programme in nine different subprograms. According tothe Olympic-rules the throwers should coincidence within certain specified conditions, this will be solved with anrandomizer in the programme.

This report is the result of a thesis conducted at the consulting firm Bjerking AB andis the final part of the Bachelor Programme in Construction Engineering at Universityof Uppsala. The work aims to investigate the costs and how the choice of ventilationsystem affects building projects during a long-term period. This report covers costssuch as investment, maintenance and energy but also how they affect residents andbuilders. Building regulations for energy consumption are expected to be tougher;therefore a comparison of two different heat recovery ventilation systems(HRV-system) was made. One system is based on a centrally placed unit that coversthe whole buildings ventilation through vertical shafts.

If Swedish companies are to compete with companies in low-cost countries they have to achieve a more efficient production. The purpose of Total Productivity Maintenance (TPM) is to increase the company's profitability by increasing the productivity. TPM is a method that involves all employees and aims to prevent failures in order to increase the availability of existing equipment.The aim of this paper is to evaluate the implementation process of TPM and give recommendations for the further implementation process. The conclusion and the analysis are based on a case study done at a production department at ABB Cewe-Controls facilities in Nyköping. The case study consists mainly of qualitative data from participation observations, surveys and interviews.Commitment of the management is a key factor in the implementation process of TPM.

As a result of global competition, companies within the automotive industry are required to improve their production systems to achieve sustainable and competitive production. To attain operational excellence, companies have adopted concepts like lean and World Class Manufacturing (WCM).In order to deliver, companies need to increase the availability and reliability of production equipment. This demands focus on both operational and strategic maintenance, and efficient equipment acquisition and management. The main objective of this thesis is to identify processes and success factors that are necessary for improved maintenance performance. By conducting a case study and by performing a literature review, the following has been studied: 1) how companies within the automotive industry work with maintenance and maintenance strategies, 2) implementation of maintenance strategies, and 3) new acquisition and spare parts management for maintenance. The results show that basic maintenance concepts and related terms are well defined in the literature.

This final thesis aim to create a support that can decrease the uncertainty when planning the cable drum flanges lines that produces cable drums in the interval 100 to 320cm in diameter at Vida Packaging in Hestra. The purpose attains through finding an optimal batch size that minimizes the total storage cost and order prime cost, without degenerate delivery capacity to the customer. Through survey the sale and stock balance development during 2005 and 2006 for cable drums in Hestra and give alternative suggestions how to plan the production after installing a new cable drum flanges line. The study also explores different ways of working during product change in existing nailing line, to minimize the order prime cost. Vida Packaging in Hestra is a part of the Vida group, which is Sweden?s largest privately owned sawmill group with seven sawmills placed all around southern Sweden.

Conflict prevention is a term which has gained much influence during the last decades. To prevent conflicts from occuring have both humanitarian and economic incentives as the cost for war are much greater than the cost of acting preventive. To act in this matter has been regarded a priority for the United Nations during several years, and the European Union have also expressed a wish of playing a more active part. The essay compares the actions taken by the international organisations in Macedonia, a country which headed toward a violent conflict. The UN acted through the mission UNPREDEP and the EU through the mission of Concordia.

Investment costs for eight different type housing systems for dairy cows has been calculated in order to compare the building costs as a function of herd size, shelter type and automatization. A commercial calculation programme for building was used and complemented with prices of equipments specific for dairy cow building. Herd sizes were 120, 250 and 400 cows. The milking equipments were automatic milking system (AMS), parallel parlour with 32 stalls (2x16) and rotary parlour with 24 stalls. Shelter was either insulated equipped with automatic cable driven scrapers on solid alleys, automatic feed wagon on rails, or uninsulated with manual manure handling and a tractor driven mobile mixer wagon on a drive-through feeding table. Building cost per cow or per kg milk was calculated using an average life time and 6 % interest rate and annual milk yield is 9 500 kg/cow and year. Structure effect 3-4 % higher for an insulated structure than in an uninsulated for 400 and 120 herd respectively. This is much lower compared to what is normally argued.

Compressed air is an energy source that is widely used in today's trucks and buses.Compressor located next to the engine supplies the pneumatic system with the compressed air and is lubricated with the engine oil. Some of the oil follows the air flow in both liquid and solid phase. The solid phase, namely the carbon particles are created due to the high temperature in the compression chamber.Oil- and particles carryover softens and destroys the rubber material in the air valves and disturbs the mechanical function of various components in the pneumatic system. In order to reduce oil- and particles carryover is an Air Processing System (APS) set downstream the compressor.No method for establishment of oil- and particles carryover from the compressor exists at the moment. Therefore the filtration efficiency of APS is currently unknown.

Arbetsplatsernas ständiga utveckling och förändring har lett fram till ökade psykosociala krav från de anställda som företaget måste bemöta. Ska man bedriva ett hälsofrämjande arbete bör hänsyn tas till hur kulturen ser ut på arbetsplatsen. Samlade värderingar och verklighetsuppfattningar kring hälsa skapas när individer samverkar med varandra och omvärlden, detta kallar vi ?hälsokultur?. Syftet med studien är att beskriva hur hälsokulturen ser ut på ett företag och vilka möjligheter och resurser som finns på företaget för att utveckla denna.

Banking systems in India is quite popular and it needs some more changes to reach all the customers. Lack of the service is main problem in Indian baking system. If the common person wants to open the account, it take?s little bit high cost and banks are not near the people location. Due to the Lack of service, people do not want to be a customer of the bank.

The margin in crop production is more and more less and it forces the producer to check out how to reduce the cost of establishment of new crop. One way to reduce the cost in establishment is to begin with plough less farming. It saves money and time compares to conventional soil preparation with plough and harrow. Not all soil types are god for plough less farming and should be continued with ploughing (mainly light soil), but other soil types working very well with plough free farming. If you want to success with plough less farming you have to think in new lanes. One of the things you have to think about is to not grow too much cereal after cereal. Low stubble is important when you harvest the crop and also to spread and chop the straw well. I have in this work interviewed some farmers and farm advisers in Östergötland to see which thoughts they have about plough less farming.

On November 1st 2010 the obligatory audit was removed in Sweden for small companies. What factors influence such companies to have their financial reports audited, and what factors exert the strongest influence. Purpose: The authors would like to investigate factors that affect companies with voluntary audits in Skåne län to continue with the audit. The authors also wish to examine the factors that have the strongest impact on the choice to adopt auditing. Method: A quantitative study has been conducted in which aquestionnaire was sent to companies in Skåne Län Conclusion: The factors that affect smaller companies to continue with audit are as follows: Accounting quality, cost, creditors (loans), suppliers / customers, the tax office and distort competition.

Unit testing is a type of testing technique which is becoming quite fashionable to the developers and companies that are in the business of creating and managing software. Alas there are seldom any concrete data to support the positive claims of the authors in unit testing methodology books. These claims are instead based on empirical studies and the experience of the authors. The problem that arises from this situation is that it becomes problematic for managers and also the developers themselves to convince both customers and their own management to use this type of testing as there is no exact return of investment model. This essay examines this problem from two points, the first point is from the literature itself and interviews conducted with a number of developers at a software company located in Umea, Sweden.

This is an investigation of a mobile prefabrication factory´s competitiveness and profitability which also will result in a suggestion for a design of the factory. The mobile prefabrication factory is an idea of a new concept for production which is meant to be used in the manufacture of slab. The main intention with this concept is that by using a fast established prefabrication factory to produce elements near the construction site, thus avoiding transport from the factory to the building site. This means not only an environmental and economic gain, but also that you can avoid risking damage the elements which often occur during transportation. The contractor is owner of the mobile prefabrication factory and can thus avoid long waiting times and cyclicality.