This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

The purpose of this thesis is to examine how investments are justified in the Swedish data center industry, with a focus on cooling equipment. This is achieved through semi-structured interviews with 20 different interviewees. These interviewees represent different facets of the industry and facilitate an understanding of which factors, such as: investment costs, operating costs, reliability, environmental impact and the influence of external and internal actors, come into play and to which degree they impact the investment decision-making process. The results show that primarily low operating cost in the form of low energy consumption is the driving factor when it comes to the procurement of new equipment. A lower environmental impact is a positive side-effect of lower energy consumption.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Today it is mandatory for every college or university student to pay a union fee to their student?s union. The fee is mandatory and is a payment for writing examinations, receiving grades. The fees purpose is also intended to secure the education quality and student influence. In the presence of the abolishment of the union fee the Swedish student?s unions stand before an uprising competition between themselves and most likely a decrease in membership.

We live in an exciting society, characterized by continuous changes and challenges. The effects of the globalization are widespread. The continuous flow of people, capital and goods follows in the wake of advances in communications, transport and information technology, resulting in a changed situation for different stakeholders in the society. This situation leads to increased cooperation and exchange, but also increased competition. The primary means of collecting empirical data for this study was interviews and a document study.

It is important to investigate the potential of biological control measures in agricul-ture, especially where economic issues restrict the use of expensive inputs or when there are environmental concerns about toxicity of agrochemicals. The bacterium Bacillus subtilis has proved promising as a biocontrol agent (BCA) in suppressing various plant diseases and it has also been shown to promote plant growth in certain cases. During this study, the effect of B. subtilis on Fusarium wilt (caused by the fungus Fusarium oxysporum) on tomatoes, as well as its effect on the earthworm species Pontoscolex corethrurus was investigated. Furthermore, the combined ef-fect of the BCA with P.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

One of the biggest challenges in the human history is to prevent environmental pollution. Everybody has an indirect or direct influence on the environment through his or her consumption. The stakeholders are not just interested in price and quality, they are also interested in the circumstances of production and how this affects the environment. By taking environmental concern in public procurement it is possible to speed up the environmental adjustment of services and products. Environmental awareness has become more and more self evident in the environmental work.

Palm oil has been used in processed food commodities since the 19th century. An increasing demand for regulating and ensuring a more sustainable palm oil production has resulted in various initiatives. However, these initiatives have received critique due to lack of compliance and insufficient revisions of palm oil plantations. The initiatives for creating an ethical, social and environmentally sustainable production are not sufficient for the Swedish industrial users of palm oil. As a result, stakeholders such as Swedish food processing companies, commit to ethical sourcing codes of conduct that go beyond the international palm oil initiatives.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Aerated steam treatment is a modern and environmental friendly method for seed borne fungus sanitation, mainly used on cereals. The method involves exposure to heat and high humidity, factors which are known to induce a fast ageing of seeds, thus resulting in reduced storability. This thesis clarifies the interdependence between seed age and the aerated steam treatment intensities. Two studies were carried out in this thesis. In the first study the storage longevity of seeds treated with aerated steam was examined. The second study investigated the shelf-life of the pre-tests used to determine the aerated steam treatment tolerance of a seed lot, by testing the treatment tolerance of seeds aged prior to the treatment.

Denna studie undersöker bemanningsanställdas integration inom lagerverksamhet. Tyngdpunkten ligger på att öka kunskapen kring vilka faktorer som påverkar hur bemanningsanställda integreras i tjänsteköpande företag samt fördjupa förståelsen för vilka möjligheter dessa företag har att öka integrationen på ett kostnadseffektivt sätt. Studien närmar sig problemområdet genom att undersöka hur bemanningsanställda inom lagersektorn upplever de faktorer som påverkat integrationen samt deras åsikter om dessa faktorer. Studiens teoretiska referensram baseras på teorier kring organisering, HRM samt sociala och legala begränsningar. Det empiriska materialet baseras på kvalitativa intervjuer.

Today it is mandatory for every college or university student to pay a union fee to their student?s union. The fee is mandatory and is a payment for writing examinations, receiving grades. The fees purpose is also intended to secure the education quality and student influence. In the presence of the abolishment of the union fee the Swedish student?s unions stand before an uprising competition between themselves and most likely a decrease in membership.