Kandidatarbetets innehåll undersöker och diskuterar frågeställningen: ?Hur påverkas narrativet i en film genom att gestalta ljudet akusmatiskt??. Med hjälp av teorier och slutsatser från filmteoretiker så som Michel Chion, David Sonnenschein och Klas Dykhoff, har vi till kortfilmen Alla ljuger skapat en ljudläggning med fokus på narrativa ljud utanför den rörliga bilden. Vårt resultat syftar till att skapa grunden till en svensk standardisering av de existerande teorier och metoder för gestaltning av akusmatiska ljud i film. The content of this bachelor thesis examines and discusses around the question: ?How does the implementation of acousmatic sounds affect the narrative of a motion picture??.

Detta examensarbete handlar om hårdrockssångares medvetenhet när det gäller sångteknik. Syftet med arbetet är att få kunskap om vilka tillvägagångssätt de har använt sig av när de skapat sitt sound och hittat sin teknik. Den teoretiska utgångspunkten för studien är det sociokulturella perspektivet. Tidigare forskning inom området behandlar traditionell röstlära, mer moderna sångskolor och socialkulturella normer gällande inlärning. Jag har använt mig av den kvalitativa forskningsintervjun som metod och mina informanter är verksamma inom området.

Purpose: To examine the hearing environment for tattoo artists regarding occupational noiseand to see whether tattoo artists are exposed to hazardous noise according to Swedish WorkEnvironment Authority regulations. Method: Using a dosimeter we measured a total ofseven sessions of approximately one hour on seven different subjects, located on five studiosin Gothenburg. As a complement we did also hand out surveys based on twelve questions toexamine habits, experienced sound environment and to see if there were any hearing relatedpatterns. Results:. Sound level measurements showed that the lower exposure action valueLpAeq,8h 80 dB(A) in one case was reached if applied to the average working time of sixhours.

Today's urban centers become denser, which contributes to higher demands on sound and noise. It is therefore highly relevant to build homes with good sound environment while maintaining living space. This thesis aimed to reduce the current concrete walls and see how the mass law affects the reduction index value and flanking transmissions. Handmade calculations were calculated according to the Swedish standard SS-EN 21354-1, where only air sound was calculated.Calculations we­­­re performed on wall elements with different weights and thicknesses, and compared with results from Bastian.In Bastian calculations of flanking transmissions were also made, this was made to see the impact of the flanking transmission when changing the mass per unit area. Mass law's impact was examined by flanking transmission and the result shows that they are not affected as long as the ratio between the thickness and the density remains the same.A questionnaire survey was conducted to determine the actual sound experience; this questionnaire was conducted on three concrete buildings in Växjö.

Today digital guides are most frequently used by the museum and tourism industries. They are also used for education purposes. They make it possible to distribute information and have it easily accessible. In addition to written information they add sound, pictures and videos which lift the whole impression of the visited place to a higher level. A variety of systems currently in use today have been evaluated.

In this paper, a navigation support approach for speech-only interaction based on auditory icons for room-based designs is presented, i.e. naturally occurring sounds that have a natural mapping to the system's underlying design metaphor. In contrast to many recent investigations that have focused on multi-modal or augmented reality systems, this paper concerns a unimodal speech and sound-only system. An auditory icon based prototype system for buildings maintenance support using a room-based metaphor was developed. The design was evaluated in a comparison with earcons and no-sound designs.

The purpose of this study was to follow a research-oriented design process and to develop a design draft for a digital service that supports users to make more environmentally conscious choises in their everyday life. By following an interaction design process from start to final delivery, the study aims at creating a broad understanding of the process. Therefore, many userrelated activities were implemented in the study: eg. personas, scenarios, sketching and user testing. The project resulted in digital wireframes for an iPhone application using embedded GPS to identify and locate environmentally friendly businesses.

This project started when LIC Audio AB wanted help with development of a hearing aid for public rooms. The problem is that a lot of people suffer from some sort of hearing impairment. In places with a lot of people and background noise the problem becomes bigger and the sound seems to flow together. During the project we found the solution for the problem in the shape of a headphone. The headphone receives a signal from a preinstalled hearing loop.

Environmental problems are accelerating with energy consumption and the release of greenhouse gases as the major issues. This affects landscape planning mostly through environmentally hazardous transportation and heating of buildings. In environmental work, the term "Sustainable development" is often used. This term was coined in the Bruntland report in 1987. A number of frameworks have been developed to clarify the term and to remind the user about relevant aspects of sustainability.

This study is based on discussions among Swedish brass teachers about teaching other brass instruments than their main instrument. Why do some choose to teach only with the help of their main instrument while others use their secondary instruments as well? What are the advantages and disadvantages and how do they look upon other ways of thinking in this matter?In addition, the study examines brass teachers? views on the balance between pedagogical and instrumental skill, as well as their views on teaching sound, technique and expression in relation to the age of the student.A questionnaire was used and anwered by 24 teachers with teaching experience in municipal music schools ranging from 7 months to 35 years. The results indicate that pedagogical skill is always important, whereas the importance of instrumental skill increases as the student gets older and more experienced. The advantage of teaching with the help of the main instrument is that one always keeps a high musical and technical level.

AbstractThe project "Sound and Play" have been implemented in collaboration with the toy company BRIO in Malmo. The purpose of the project was to examine whether and how BRIO in the future could develop toys around sound for Toddlers.The problem formulations that would be answered after completion of the project was "How could BRIO broaden its product range with the help of audio toys?", "How can you combine toys and sounds in an interesting way for children?", "How do you create a toy with sound that is fun for the child, but not annoying for parents?". Currently BRIO only has two toys with sound in this age group.The expression of the toy was going to be a mix of classic and cool and the overall feeling of the toy was going to be explorative and arouse curiosity in the child. This feeling would be communicated through simplicity and joy.

Due to the increase of the emission of greenhouse gas and climate changes more and more customers demand environmentally sustainable products. The increased demand of sustainable products from cradle to grave is something that has affected the food sector. Many retailers within the food sector feel that they are less or more forced to be environmentally friendly. Nowadays many retailers have chosen to show customers and stakeholders that they want to ?do good? by publishing annual sustainability reports. The Swedish food market has been one of many markets investing in being environmentally friendly.

AbstractThe project "Sound and Play" have been implemented in collaboration with the toy company BRIO in Malmo. The purpose of the project was to examine whether and how BRIO in the future could develop toys around sound for Toddlers.The problem formulations that would be answered after completion of the project was "How could BRIO broaden its product range with the help of audio toys?", "How can you combine toys and sounds in an interesting way for children?", "How do you create a toy with sound that is fun for the child, but not annoying for parents?". Currently BRIO only has two toys with sound in this age group.The expression of the toy was going to be a mix of classic and cool and the overall feeling of the toy was going to be explorative and arouse curiosity in the child. This feeling would be communicated through simplicity and joy.

Extended Producer Responsibility (ERP) is a form of product take-back regulation that requires the producers to manage their products at the end of life. By internalising the products? entire life cycle costs into the market price the ultimate objective of such regulations is to reduce the environmental burden from the products. This Master´s thesis seeks to examine if the total life cycle cost of a product actually is borne by the producer, and if not, predict who will then take this cost. This is done by analysing the market for take-back activities in three different categories of products; electrical and electronic equipment, cars and wind power stations.

Wind power in Sweden is expanding in response to the government's decision that 49% of Sweden's power should originate from renewable energy sources by the year 2020. Problems with noise and sound emissions related to wind turbines are a constant argument against the wind power expansion and this paper means to examine if vertical axis wind turbines might be a viable alternative to the conventional horizontal design for noise sensitive areas. In order to determine factors like difference in frequency, noise propagation and noise emission level, measurements of both horizontal and vertical axis wind turbines have been completed and the data analyzed with MATLAB. It is shown that there is a difference in how the noise from the two types of turbines propagates due to avariation in the frequency spectra of the emitted sound. It is also shown that vertical axis wind turbines generate a lower sound emission with less intensity inthe lower frequencies..