The aim of this thesis was to answer a number of questions about the environmental consequences of aircraft de-icing. A further aim was to suggest how the environmental consequences due to the release of de-icing fluids can be measured and reduced.The main impact of the aircraft de-icing on the environment is due to the large oxygen demand for the degradation of glycol based de-icing fluids which are released in the environment. The effect of the increase in oxygen demand depends on where the degradation occurs in the ecosystem. In a sensitive ecosystem, the large demand of oxygen could provide an anaerobic environment which would be harmful for many types of organisms.In order to reduce the negative effects of the applied de-icing fluid, there is some type of collection system at every regular airport in Sweden. The methods of collection can be divided into two general groups, hydrological isolation or vacuum sweeper trucks.

The background for my thesis is the fact that with rising electricity and oil prices it becomes interesting to calculate on alternative heating systems. I have chosen to calculate upon my parents? farm, which today heats the dwelling house with wood. This is very time-consuming work, time which could be spent on other work. The main objective for this study is to compare three different heating systems to decide how they differ considering effort and cost. The result from the calculations was that grain-heating system demanded the least amount of work, but the total cost was a little higher compared to chips heating. Chips heating required half as much work as today?s wood heating and had a little lower total costs compared with the corn heating. Which system to choose largely depends on how the own work is valued.

From policy to practice - a study of textile companies view about challenges with implementing CSR policies examine the textile companies awareness of which challenges there are with the implementation of codes of conduct in a global supply chain, as well as to analyze how the companies deal with the challenges. With increased globalization many companies have chosen to outsource entire or parts of the production in various developing and newly industrialized countries. However, the working conditions in these countries do not always fulfill the labor standards that are defined in various conventions. The society began demanding companies to take social responsibility. The social responsibility goes under the term Corporate social responsibility (CSR).

Tidigare forskning har visat att individers omgivning (klimat, natur) har relativt stor inverkan för hur pass stor vemodet blir vid byte till en ny omgivning. Omgivningen anses även påverka och forma individens personlighetsdrag. Studiens syfte var att undersöka vilka individtyper som är mest villiga till att byta ort för ett lämpligt arbete, i relation till deras huvudsakliga uppväxtort. Undersökningen bestod av 250 deltagare. Resultatet redovisade signifikanta samband mellan både uppväxtort och attityd till att arbeta i stora och mindre städer.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.

During the past years Building Information Modelling (BIM), which is a digital way to work, has begun to spread amongst the parts of the construction process. At the construction phase the larger companies has started using the new way to work. This expansion has not been developed amongst smaller companies leading to the purpose of this report, to investigate in which ways the smaller companies can implement BIM by changing their way to work. The thesis is delimited to work preperations with the objective to define how the work preperations should be structured to enable the implementation of BIM. To achieve the objective of the report, information about the subject has been collected by interviews and literature studies.

Background and problem: In the last few years the threat against the environment and especially the emissions of carbon dioxide has become increasingly debated. The government have set up a goal to lower the emissions of carbon dioxide with 40 percent until 2020 compared to the level in 1990. The emissions in the transportation sector have, in contrast to the total emissions, increased since 1990 and will continue to increase unless powerful control measures are implemented. The lorry centres have to use strategies to answer to these external threats which lead us to the two questions of this thesis: - What methods do the lorry centres use actively and which do they consider as the most important methods for fuel saving? - Are there any differences which methods small, medium and large centres considers as important? Purpose: The main purpose of this thesis is to examine which methods lorry centres use actively and which they consider as important for fuel saving.

The aim of this study was to reach a better understanding of voluntary work and its possible influence on the work role. Based on a phenomenological approach, five voluntary workers from the leisure field were interviewed. The interpretation of the empirical data was based on the Humanistic psychology and its theories about personality, self-realization, motivation and emotion. The results show that the motive behind the voluntary engagement varied amongst the participants and all of them stated more than one motive. However, social motives, wanting to learn more and develop their skills and also wanting to help others, were the most frequent motives among the participants. In the light of the theoretical background for this study, these motives can be understood as being due to the need of self-realization and appreciation from others, and also a wish to reach an ideal self.

If P&C Insurance Company faces a challenge when their treasury system needs a new interface to a software as a service application. They need a suggestion for configuration for how the system and the application can work together. The work presented in this report is a suggestion for how you can make business configuration of an IT-based Treasury System in general. The exact configuration for the case received from If is presented as a separate report, found in Appendix A and is called the If-report. The If-report presents the suggested technical set-up of the configuration.

The purpose of our work has been to investigate how gender is viewed by pre-school teachers, as well as taken into account in their everyday work. We have also looked into how gender plays a part in the planning and shaping of the pedagogical environment.Our work is based upon qualitative research method, as we have conducted several qualitative interviews at different pre-schools along the way. The reason we chose genus as our main focus is that the pre-school curriculum states that all staff is obliged to meet the goals concerning gender..

This qualitative study treats the construction and maintenance of balance between work and private life and how flexibility in the workplace is perceived. The study was conducted using semi-structured interviews and these have been conducted in five large companies around Gothenburg. The analysis and results are based on the phenomenographic method approach and the final results were four themes: Balance, Flexibility, Combining family and work and lifelong learning with related subcategories. The result shows that the construction and maintenance of balance between work and personal life is something that is tied to the indi-viduals and the current situation in life. Two of the most common strategies to maintain a dis-tinction proved to be planning as well as other activities, in order to move the focus away from the work.

Biological pest management is defined as control of pests using their natural enemies. This method has been used in Sweden since the 1970´s and it has been developed ever since. Biological pest management is today relatively common among commercial growers but there are good possibilities to apply this method in the home gardens as well. The aim with this thesis is to compile a report from both the companies that are marketing the products and the home gardener´s point of view. This should give a better understanding of the market and how it could be improved. We will give examples of products that represent the different kinds of organisms that are being used in biological pest management. Our hope is that this will be an introduction to all interested in biological pest management. The legislations regarding registration of organisms are still a matter of discussion and are causing problems to producers, distributors and the market in general. Why isn´t biological pest management more common in the home garden? The main reason appears to be the lack of knowledge in the subject. What are the benefits using biological pest management when it requires so much knowledge and it´s more expensive than conventional pest management? With the environmental problems we face today, we hope that every single gardener has an interest in developing an environment as clean as possible, even if only in one's own backyard..

The aim with this study was to collect fundamental information, and to plan, a windpower farm in Juddhult , Småland in southern Sweden. The goal is to collect the bestavailable projecting planning support. The pieces of this projecting planning supportthat will be presented is; Environmental Consequence Description (MKB), productioncalculations, comparisons between different plant types, economic calculations, evaluatethe economy and give some farm design suggestions. The imagined wind farm will belocated in forest environment and which may cause a number of new problems. Specialinterest that will be affected, where special consideration because of the forestenvironmental is requested is, hunting, wetlands, ancient monuments and windturbulence.

Risk assessment is made to determine risks with contaminated areas and to determine which treatment the area requires. In Sweden, risk assessment is divided into three levels: risk analysis, facilitated risk assessment and detailed risk assessment. In detailed risk assessment site-specific guideline values are developed to compare with values of contaminants that are measured in the area.Site-specific guideline values vary with geological and hydrogeological parameters. The purpose of this report is to examine which of these parameters that affect the guideline values. The examination was done using a calculating program for consideration from the Swedish Environmental Protection Agency from the year of 1997.

Buffer zones play an important role for the water quality in our watercourses. When harvesting a forest close to a watercourse a buffer zone should be left. When it's not left, it will lead to radical changes in the environment for the water organisms. The overall purpose of this thesis was to illuminate the production- and environmental thinking when establishing new buffer zones in south of Värmland. The partials goals were to determine choice of tree species, ways of regenerate, occurrence of soil scarification and the occurrence of machine tracks in newly established buffer zones.