Increased understanding of the mechanisms that operate in conjunction with the welding of metal surfaces may help to improve existing manufacturing processes, and to enable new products and combinations of materials. The purpose of the project has therefore been to acquire a deeper understanding of what is happening in the bond for steel and for the factors that form the basis for a bond to develop between metals in the production of laminates by pressing. The merge has been done by pressing and the surfaces after the experiments have been studied in detail in the scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDX) and with interferenceprofilometry in Wyko, to provide a greater understanding of the mechanisms that influence the bonding in the interface between metals. The project was limited to contain the materials Docol 1000, HyTens 1200, Aluminum AA3003 and a commercial steel. The parameters varied in the experiments to study their influence closer are temperature, pressure, heat treatment and pretreatment. This has been implemented by pressing with varying temperature and pressure.

Climate and environmental issues is now high on the agenda. We live in a generation that must try to solve some major environmental problems. Buildings and habitations account for approximately 40 % of Sweden's total energy today. To reduce this figure, as needed, more research in the field of energy efficiency is required.This thesis concerns the heating of buildings. The load on district heating is heavy during certain times of the day.

The swedish national environmental goals have different policies and developments connected to them in order to achieve the goals on time, but the implementation of the different policies differ and is hard to evaluate compared to the theoretical background. With this thesis I have chosen to investigate the climate investment programmes results in Östersund compared to its goals with a case study. The different projects within the climate investment programme have reduced the emissions of CO2, but not in the amount that was anticipated and a lot of the projects were within projects that the municipality already was developing or doing. .

This report analyzes disposable packaging and returnable packaging with the methods life cycle analysis and life cycle costs analysis. These two different packaging are analyzed through the company Clas Ohlson?s packaging-flow. To get a picture of how the flow works, a visit at the company and email contact have been done with Clas Ohlson to get relevant informationToday Clas Ohlson has a big flow of articles to the stores without larger variations in the demand, with the exception of autumn, which is when customers start shopping for Christmas. Clas Ohlson?s articles are placed on a pallet and are wrapped into plastic-film for protection and to make sure that nothing will be stolen.

I detta arbete undersöks attityder, motivation och tankar kring miljövänligt beteende på arbetsplatsen bland anställda inom skola och omsorg i tre Dalslandskommuner. Två av dessa har infört en arbetsprocess som låter de anställda, tillsammans i arbetslaget, sätta sina egna mål för miljövänliga arbetsrutiner på arbetsplatsen. Inspiration till studien kommer från Self-Determination Theory (Ryan & Deci 2000) och Value-belief-norm Theory (Stern 2000). Data samlades in och analyserades med både kvalitativa och kvantitativa metoder. Kvantitativa data från 169 frågeformulär som behandlade motivation och attityder användes främst som bakgrundsdata till fem stycken intervjuer.

The real estate company Ihus is facing an expansion of its comfort cooling in Noatun,Uppsala, to provide the buildings in the block with cooling. The buildings in Noatunare mainly used for office premises, where the requirements for an accepted indoorclimate is great. However, it?s uncertain whether Ihus should continue, as currently,producing comfort cooling by themselves using a compressor chiller, or if they shouldconnect themselves to Vattenfall?s district cooling net.The purpose of this report is to examine which technique of cooling is best suited forIhus and their buildings in Noatun. It should also work as a guideline for othercompanies facing the same problem as Ihus.

How the renovation of the vast Swedish existing building stock with renovation needs will be performed is considered as decisive in order to achieve the target set by the Swedish government of reducing the energy use by 20 percent by 2020. Consequently, the challenge of the building sector consists in reducing the energy use in the existing building stock but at the same time ensuring that the indoor environmental quality is improved and the cultural values are maintained.So far, there have been a few renovation projects which strongly have reduced the energy use and at the same time have taken into account the environmental aspects and the cultural values. The main reasons are that there have been few incentives and a lack of routines in order to steer efficiently a ?sustainable renovation?.The participants in a Nordic project on sustainable renovation thought that it would be a strong advantage to link the concept of sustainable renovation to the Miljöbyggnad certification system. Indeed it is trusted by the Swedish building and construction sectors and can provide sustainability targets in order to steer renovation processes.The objective of the master thesis is to show how the Miljöbyggnad certification system could be integrated in practice in the renovation process of Riksbyggen, an organization which administers housing associations (Bostadsrättsföreningar) and build houses.

As a result of the Civil Protection Act, there is an imperative for Systematic Fire Preventive Measures, SFPM. SFPM can be divided in two parts: organisational preventive measures, and documentation of fire preventive measures. The manner in which SFPM is to be conducted is similar to that of the environmental management system ISO 14001. This report provides suggestions how to integrate SFPM with ISO 14001..

Studien har sin utgångspunkt i en trend som blivit allt mer synlig under den senaste tiden; människor tar ett personligt ansvar för globala problem. Studiens syfte är därför att undersöka hur medvetna människor ser på frågan om personligt ansvar vad gäller globala problem? Studien är gjord som en fallstudie och undersökningsenheten, eller fallet, är deltagare på kursen Hållbar utveckling. Metoden är intervjuer. Jag har genomfört semistrukturerade intervjuer med fem kursdeltagare och dessa intervjuer utgör studiens empiriska underlag.

I denna rapport beskrivs arbetet med att tillvarata och anpassa data från en enkätundersökning till digital hantering i GIS. Undersökningen är en besöksstudie utförd av Karlstads kommun och Skogsstyrelsen för att kartlägga människors rörelsemönster i I2-Skogen, ett gammalt militärt övningsfält som numera används som rekreationsområde. Enkäten består av ett antal frågor om exempelvis typ av aktivitet, ålder och åsikter om området, samt en karta på vilken besökaren ritat in var i området han eller hon rört sig. Utgångsmaterialet för arbetet har varit en databas innehållande enkätsvaren, samt originalkartorna med den ritade informationen. Arbetet omfattar dels att undersöka om kartinformationen kan digitaliseras automatiskt genom scanning och vektorisering i batch, och dels att normalisera och strukturera databasen med enkätsvaren.En metod för digitalisering har utarbetats och testats på ett urval av kartorna.

Travelling children is the topic of my work. Children who commute between more than one home. Society is rapidly changing and so is the concept â familyâ . The nuclear family is no longer the most common one. Children are now travelling more frequently than ever.

This thesis is performed at Saab Bofors Dynamics in Karlskoga and investigates a technique for ranging with laser pulses. The investigated technique is called Constant Fraction Detection (CFD). Described briefly, the received laser pulse is split into two equal parts, where one part is delayed half the pulse width and inverted. This signal is added to the original pulse. The resulting curve has the shape of a laying S and the detection of the zero level is used to stop the time measurement.

Bakgrund. En gyllene standard för att bestämma noggrannheten för intraorala scannrar existerar inte. Intraorala scannrars prestanda som ges av olika leverantörer är inte fullt jämförbara. Det finns ett behov att standardisera och ta fram oberoende försöksupplägg för att kunna jämföra intraorala scannrar. Mål. Målet med studien var att beskriva och utvärdera en ny metod för att bestämma noggrannheten av intraorala scannrar genom ett standardiserat in vitro testförsök och att använda metoden för att beräkna noggrannheten på en kommersiell intraoral scanner. Material och metod.

Background and problem: In the last few years the threat against the environment and especially the emissions of carbon dioxide has become increasingly debated. The government have set up a goal to lower the emissions of carbon dioxide with 40 percent until 2020 compared to the level in 1990. The emissions in the transportation sector have, in contrast to the total emissions, increased since 1990 and will continue to increase unless powerful control measures are implemented. The lorry centres have to use strategies to answer to these external threats which lead us to the two questions of this thesis: - What methods do the lorry centres use actively and which do they consider as the most important methods for fuel saving? - Are there any differences which methods small, medium and large centres considers as important? Purpose: The main purpose of this thesis is to examine which methods lorry centres use actively and which they consider as important for fuel saving.

This thesis was conducted at Mälardalen University in Västerås and Härjeåns Nät AB, mainly in Sveg. Härjeåns Nät AB is a network company that delivers electricity in Härjedalen municipality, Ånge Municipality, Ragunda and Bräcke municipality. The maintenance and dismantling of electricity and broadband networks generates a lot of waste. The purpose of this work is to present proposals on the management of the waste. The goal is that all of Härjeåns offices should have equal management for the waste and an overview of how to manage the various wastes.