This major project in Building Engineering has its focus on inquiring into what methods has been used in the planning process of the residential buildingLjusbojen 1. This project has been conducted in cooperation with Kadesjös Ingenjörsbyrå AB, an engineering contractor firm which also acts as the property developer. Initially several different general methods for planning residential buildings have been presented. After the methods from the process of building Ljusbojen 1 has been analyzed compared to the general methods presented in part 1. This shows what the determining factors are during the planning process; factors such as cost, quality, time management, know-how and environmental issues.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.

Inspired by the current debate over the effectiveness of Public Relations (PR), the authors of the following thesis have sought to analyze how PR and advertising differ in terms of how they affect consumers. The subject of the thesis was chosen due to the lacking knowledge of how PR shapes consumer attitudes and intentions. The authors wish to upset the institutionalized myths which dominate in the PR-business. One example of such a myth is that the effectiveness of PR can be measured by the number of press releases an activity produces and that PR?s superiority over advertising is due to its higher trustworthiness.

Introduction: Sleep is necessary for human survival. Difficulty sleeping occurs in about one in four adult person in Sweden, insomnia in every ten. There are several reasons for difficulty sleeping, where stress is one of the most common. The quality of life and health are affected negatively. Treatment with proven efficacy against insomnia is not only sleep medication, but also cognitive behavioral therapy, CBT.

Den övergripande målsättningen med denna uppsats är att visa hur GIS kan fungera som stöd i en MKB. För att exemplifiera detta genomförs i denna uppsats en specificerad studie kring flygbullerpåverkade områden vid Malmö-Sturup flygplats. Flyg-bullerkartor erhölls från Luftfartsverket (LFV). Analyser gjordes för olika startriktningar om flygbullrets interferens med bland annat människor, naturvård, kulturmiljö, friluftsliv, fastigheter (egendomar) samt med några tätorters expansionspotential. Jämförelser genomfördes mellan flygplanstyperna McDonell Douglas MD80 och McDonell Douglas DC9.

Bakgrund och problematisering: Tjänsteföretag på konkurrensutsatta marknader motiveras att anpassa sina produkter utifrån kundernas efterfrågan där utvärdering och förbättring av en tjänsts kvalitet är ett tillvägagångsätt. Fallföretaget Vindsurfing.se studeras med en problembakgrund baserad på hur företag kan utvärdera kvalitet i sina tjänster och vilka positiva och negativa faktorer i produktionen av tjänsterna som går att identifiera utifrån kundernas uppfattningar.Syfte: Syftet med uppsatsen är att undersöka den av konsumenterna upplevda kvaliteten på de nybörjarkurser som företaget Vindsurfing.se erbjuder. Detta för att identifiera olika faktorer med påverkan på kvaliteten som kan ligga till grund för utredning av hur verksamheten kan utvecklas i framtiden.Teori och modell: Litteraturgenomgång med utgångspunkt i begreppet service quality, dess definition, tillämpningar och mätinstrument. Nyckelmodeller är bl.a. Grönroos (1984) ?Service-Quality Model? och Parasuraman et al., (1985) ?Service-Gap-model?.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.

The purpose of this thesis project was to study how different companies are working with LastTime Buy and through that study propose improved ways of working with this for Scania CVAB. The project aimed at studying the work processes from three different perspectives:decision models, quality aspects and liability aspects between companies.To study this, qualitative interviews with one or several representatives from differentcompanies that are affected by or involved in Last Time Buy were used. Representatives wereselected partly from Original Equipment Manufacturers, suppliers, component manufacturersand companies offering third part solutions for Last Time Buy. The companies also reflecteddifferent industries. The interviews aimed to create an understanding for the methods used atthe different companies but also the ways of thinking and the knowledge behind the choice ofthese working methods.The analysis shows that the Original Equipment Manufacturers used very similar decisionmodels for Last Time Buy, but that external factors or the company strategy made them reachdifferent results.

Over the last 25 year IT development has greatly influenced the waycompanies are managed, the tremendous growth in the information society has made a huge amount of information extremely accessible. This has resulted in the problem of information overload where the large amount of information can affect the quality of a decision basis collected by a controller.The purpose of the study is to examine how a controller is affected by information overload and how this influences the decision basis. We intend to highlight the important elements to represent a high quality of information.A survey was conducted through a case study within a global affiliated company in the packaging industry. An adductive approach has been applied with a qualitative research method. Collected empirical material from interviews has been put into relation with existing theories.The case study indicates that there is no relationship between the problem of information overload and flawed decision basis.

Fuel pellets are a refined bio fuel mostly consisting of residues from sawmills and wood industry. At Rindi Västerdala AB's combined bio energy plant in Vansbro fuel pellets are produced, while the waste heat from the process is used for district heating. The pellets are produced from sawdust, wood shavings and dry wood chips that is dried, milled and pressed into small cylindrical rods. The advantage of refining the wood material in this manner is that the energy value is greater per unit volume and unit weight, thereby the cost of transportation per energy unit is reduced. Also, less storage space is needed.Pellet manufacturing is a complex process since many parameters affects the final results.

Operators and Internet service providers invest in broadband to be able to deliver new services that require higher data transmission rate. A way to make this possible is to use ADSL, Asymmetric Digital Subscriber Line, as the access technology. To be able to handle this technology, the service providers should do a pre-qualification. Methods and tools are needed to analyze the local copper lines and decide if these qualify for ADSL with respect to service availability and possible bandwidth through the lines. This report brings up some methods for pre-qualification of ADSL, the important quality parameters and how to gather them from the available services today.

AbstractTitle:                           What is the interaction between information providers and decision makers like? A case study on management accounting in Swedbank.Course:                              Master?s thesis in Business economics, 15 ECTS.Date:                                                        2009-06-01Authors:                            Daoud Ghorbandi and George TekmenSupervisor:                        Paula LiukkonenLanguage:                         SwedishPurpose:        The purpose of the paper is to study the relationship between information providers and decision makers regarding the quality of information for economic decision-making in companies.Method:                     The authors use the qualitative method approach. The essay's primary data consists of data collected through interviews, while the literature that the authors have made use of for the interpretation and analysis of the paper form the essay?s secondary data.Theory:                      It includes a main theory and four other theories supporting the paper. The main theory is the agent theory, while theories on information quality, the theory of outsourcing of management accounting, theories of calculation methods and regulations on management accounting is to support the analysis and conclusions made in the paper.Empirical base:          Interview Responses forming the essay?s primary data is presented in its entirety in this chapter.Conclusions:              The authors conclude that there are no major problems or obstacles in terms of internal management accounting in Swedbank, at least not in the departments such as the HR and the GF.

The purpose of this thesis is to identify and define Key Perfomance Indicators (KPIs) and value adding services which are used to describe the quality of Forias logistics services from different aspects. The KPIs should be attractive to both Foria and their customers, with the aim to strengthen the interaction between both parties.The basis for this work is a research in which a literature review and a survey of the market for Swedish logistic service providers were carried out. An analysis of the present situation of Foria was carried out, where a number of people in the company were interviewed. These elements were used together with definitions of KPIs to perform the analysis of the work.The result of the work is ten KPIs that have been created and developed for Foria and which are considered to be attractive to both Foria and the selected customers. The KPIs are: · ECO-driving (binary) ? the company has ECO-driving-educated drivers· ECO-driving (comparison figure) ? all drivers individual driving and its resulting exhaust emissions are compared· The environmental impact ? a total of exhaust emissions from all vehicles belonging to a single business, measured in tonne-kilometres· Complete order ? portion of fields with accurate information (in an order), with the possibility of error categorization· Delivery reliability ? time difference between expected and actual delivery, average for all orders· On-time ? the number of days and hours of difference between the expected and the actual time, for all activities of the order· On-time (activity) ? the number of hours and minutes of difference between the expected and the actual time, for each individual activity of the order· Divergence ? a categorization of all causes of divergence and its responsible department· Level of integration ? the level of cooperation between the logistic service provider and the customer· Customer satisfaction ? how well an order will meet the expectations of the customer The KPIs are described in detail with definitions, how they can be used and what is required to implement them in the service process of Foria.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.