The purpose of the project has been to work out recommendations that reduce the energy-related costs and environmental impact of HPW Fresh & Dry Ltd., a fruit drying factory in Ghana. The factory produces electricity with diesel and biogas but also purchases electricity from the national electricity company. Heat for the drying process is produced from biogas, kerosene and solar panels. In the project the energy system was analyzed by measuring production and consumption of heat and electricity. The project results show that the factory can become self-sufficient on heat if the available energy is used more efficient. The production units for both electricity and heat have low efficiencies.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.

This thesis investigates management accounting systems in a Swedish health care environment. Through a qualitative case study of an activity-based cost accounting system that was introduced in 1994 at S:t Görans Sjukhus, a large Stockholm hospital, the following questions are addressed: What benefits can an activity-based cost accounting system offer the Swedish health care providers? What are the potential problems impeding the implementation of such a system? Main findings: an activity-based cost accounting system can improve the understanding of where costs are generated in the production processes. Comparisons between alternative production processes are improved, and the data may serve as a basis for internal pricing measures. Concerning the second question, difficulty in reconciliating the principles of economic control with the culture present in a hospital is identified as the main obstacle to a new management accounting system..

IT exist and are needed in larger organisations today, this creates possibilities for new applications. It has become more frequent with IT within HRM which has developed new concepts like e-HRM and HRIS which links IT and HRM together. We have through qualitative content analysis of interviews investigated how IT-tools affect HR-workmanship. The purpose is to create a basis for describing how employees experience their work with HR within a PA-system. The basis of the PA-system will then answer if it contributes or limits the employees and their activities.

The Swedish Library Classification System, known as the SAB-system, can be viewed as a product of the cultural and social norms and values in Sweden during the time in which it was created and subsequently reviewed. The main purpose of this master?s thesis is to examine the archaeology section J in the SAB-system, in order to observe if values and norms within this discipline had any impact on the Swedish Library classification system. Our intention is therefore to verify any correspondence between the choice of topics and hierarchical structure of that section, and the values and norms that ruled the Swedish society during the 20th century at large but with particular emphasis to the academic discipline of Archaeology. At the present, Archaeology is often disputed as a value-free interpretive science.

Inom svensk process- och tillverkningsindustri finns det stora mängder spillvärme som sällan kommer till användning. Att hitta olika tekniska lösningar för att effektivt tillvarata denna spillvärme skapar både nytta ur ett hållbart perspektiv samt ur ett ekonomiskt perspektiv för företaget.I denna rapport presenteras en utarbetad beräkningsmodell i Excel. Beräkningsmodellen används för att uppskatta lönsamheten för anläggning av ett högtemperaturlager i berggrunden. Excel-filen ska kunna användas för företag som en första uppskattning om ett borrhålslager är ett alternativ för tillvaratagande av spillvärme. Utformningen av beräkningsmallen utgick från Xylems högtemperaturlager i Emmaboda.Beräkningsmallen testades på Xylems borrhålslager.

Detta arbete kretsar kring obemannade luftfartyg, UAV, avsedda att baseras ombord påörlogsfartyg. Regelverk och standarder tillsammans med befintliga fartygs-, helikopter- ochUAV-system utgör ett ramverk inom vilket ett scenario leder fram till grundläggande tekniskakrav för de delsystem som ingår i ett fartygsbaserat UAV-system. Kraven, som är framtagnamed spårbarhet i sjöoperativa förmågor, erfarenheter från den miljö ett luftburet system skaverka i ombord och systemexempel som visar vad som är möjligt att uppnå med dagenstekniknivå, presenteras som ett förslag till värderingskriterier och effektmått med tyngdpunktpå de krav som ställs på luftfartyget (UAV) i sig..

With increasing energy prices and increased focus on the environment we saw the need for companies to get control over their energy use and their emission of carbon dioxid. An analysis tool that integrates both these areas is, with our knowledge, not available on the market today. Therefore, our project became to develop such a tool.By doing this degree project we would like to clarify that energy consumption and environmental impact are integrated. The less energy consumed by today?s society the smaller the environmental impact will be.

AbstractThis degree thesis was made in cooperation with Chematur Engineering in Karlskoga.Many of the environmental issues of today are a result of the motor traffic. Consumption of fossil fuels harms our environmental through formation of carbon dioxide and other greenhouse gases. To get under control with our environmental issues it?s important to find substitutes for oil that are both cheap and environmentally friendly. Ethanol has a long history as a motor fuel and is both enviromentally friendly has a high efficiency.According to the EU commissions directives for motor fuels, 5, 75 % of all the fuels in Sweden should be renewable in 2010.

Jämtkraft AB which is a power production company in Sweden has bought two newhydro power units to their station in Hissmofors. The two new generators are using aconcept with sliding stator feet to handle the thermal expansion.The concept with sliding stator feet on hydro electric generators has not beenworking satisfactory on many hydro power stations in Sweden and has caused a lot ofcosts due to long downtimes.The new station in Hissmofors is very important for Jämtkraft AB, and therefore theywant to know how to make sure that the sliding stator feet are working as theyshould. According to theories and a simplified model of the generator the stator feetdisplacement should be around 1 -1,6 mm.The generators are delivered with a surveillance system that will measure thedisplacement of the sliding stator feet. The signal from the system isn?t accessible forJämtkraft AB but it will alarm when the sliding stator feet are malfunctioning.To secure the function of the sliding feet a logger for the surveillance system or adifferent measurement system must be used; if both systems are used Jämtkraft cansecure the function of the surveillance system..

In modern society in terms of economics and environmental impact, it is important to ensure that a company is as energy efficient as possible to reduce the amount of energy used. About 10 TWh of electricity used annually to pump drives in Swedish industry. Therefore, pumping system has great potential for energy savings.The objective of this report was to determine how much energy and money that can be saved with the insertion of variable speed drive to six pumps on Bleach plant 4 in Skutskär Mill. The work was performed with electrical measurements during one week, analysis of pump curves and the compilation of production data over a year.The results show that four of these six pumps were profitable and yielded an annual saving of 1172 MWh of electricity and 560 000 SEK. With an economic lifetime of 10 years and a discount rate of 6.8% the final result for the entire life-cycle savings became 3 355 000 SEK.

The purpose with this report is to examine how the implemented energy efficiency measures on Bokelundskolan in Växjö have had impact on the energy use. The measures which have been implemented are, new ventilation system, new heating system, optimized adjustment of the heating system, new windows with U-value 1.2 and lower window height, insulation under windows and in the crawl space. The school's energy use before and after rebuilding has been calculated with the calculation program, Vip-Energy 1.5.5.Calculations of energy use for the school with windows on U-value, 0.9 and 0.7 have also been done. The replacement of windows has been studied from a cost perspective. The conclusion is that the exchange of heat and ventilation system was the biggest contributor to reduced energy use on Bokelundskolan.

We have performed a case study on Acne Jeans, a creative Swedish fashion company, which initiated a cooperation with the Swedish venture capital firm Öresund. The aim of our paper was to examine what motivates a venture capital firm to transform the management control system of a creative company, into a more formal system of control. Main results: Öresund did not have an excessive impact on the management control system of Acne Jeans, due to three main reasons. First of all, Acne Jeans had a satisfactory management control system prior to the cooperation. Furthermore, the relationship between the two parties was characterized by mutual trust.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.