The task of making a correct application for B- activities is the foundry time consuming task. Information and facts concerning your entire business activity shall be attached into a description of environmental consequences, which will be the basis for the decision making whether the activities shall be granted a permission to practise environmentally hazardous actions or not. When the Environmental Act were established 1999, the permission process became more extensor. With this study I want to give an insight about how these applications are made. The methods I have used to collect information are a study literature where the Environmental Act has been the focus, and qualitative interviews with two County Administrative Board. I used the Environmental Act to understand why permission is needed and the interviews to give me insight in how the work is done. My conclusion is that it is very unusual that an application is granted without complements.

In this bachelor thesis, diagnostic methods for one of Siemens stem inlet control valves have been developed. The work has taken place during ten weeks at Siemens Industrial Turbomachinery AB in Finspång. The company produce steam- and gas turbines and also provides service and maintenance. The purpose with this project has been to develop diagnostic methods that oversee the health of the control valves. By using the developed methods you will know when it?s time for maintenance.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

In this report you can get a complete instruction about how to build your own development system for the PIC-processor. This card will be used for laborations for the students at LITH-ITN. With this card you can send new assembler codes (new instructions) down to the microprocessor via the Serialport on your computer. Then the new instructions for the microprocessor will start to execute. We made a solder paste stencil at Campus Norrköping solder paste stencil laboratory.

Scandinavian Biogas is involved in the planning of a combined ethanol and biogas factory in Karlskoga, Sweden. Besides biogas and ethanol large amounts of digester residues will be produced, about 450 000 liquid tonnes residue (~7,3 % Dry Substance( DS)). The objective of this thesis was to investigate possible uses of the residue from the biogas production process ScandgasEthanol developed by Scandinavian Biogas, and to derive a methodological approach how to evaluate and compare handling systems. Three systems where proposed and compared in this thesis; spreading of the untreated residue as fertilizer (system 1), dewatering to a higher DS content to reduce transportation before spreading as fertilizer (system 2) and production of a solid fuel by dewatering and drying the residue (system 3). The general conditions for the proposed systems were investigated in terms of practical viability, economical aspects, environmental impact and energy inputs/outputs.

This report is based on a thesis that was carried out during spring 2012. The report covers the development of a preliminary study to Performance Sk8. The purpose of the study is to facilitate and contribute inspiration to Performance Sk8 to run an automation project to bring home their production to Sweden from China. The reason is to gain a greater ability to control quality, produce smaller batches and reduce the cycle time to reduce costs.The goal is that the preliminary study shall meet the requirements and wishes Performance Sk8 and other partners defined. The pre study will contain different cost proposals for the automation of selected process and serve as a basis for procurement of the equipment.The pre study has resulted in some proposed solutions to the various steps required to automate Performance Sk8 ?s production.

This is a study about how different digital instruments can be used in education for pupils with autism and intellectual disability. The questions formulated to research this chosen area was: ?What does teachers think about digital instruments and interactive teaching materials when it comes to benefits and disadvantages in the classroom?, ?In what ways is digital instruments used as teaching materials in the specific school context? and ?From a perspective of teaching and learning, what kind of problems and opportunities can be gained from using digital instruments and teaching materials?. To gather this information interviews was done with three specialist pedagogues working with the chosen group of pupils at three different schools. The material shows that the specialist pedagogues have positive attitudes towards working with digital instruments in this specific group of students..

The reasons for hypothermia during general anaesthesia are many and varied. The lowered body temperature causes negative physiological effects and leads to discomfort for the animal during the recovery period. This student report is a combination of field study and literature review. In the field study the changes in ambient temperature and the rectal temperature of dogs were monitored during general anaesthesia. The purpose of the study was to see if the body temperature of dogs was reduced during general anaesthesia.

Radio Frequency Identification, RFID, is a convenient way to enable contactless identification which does not require any physical nor optical contact. As with any radio-based communication the signal can be intercepted, thus making the technology vulnerable to several kinds of attacks. Interception of communication is not the only threat. Since RFID tags might contain personal information or information that will grant the owner access to secure areas, skimming and spoofing attacks are also major threats against this technology. In this thesis report,  the perspective of an adversary is portrayed in an RFID-enabled environment by presenting where RFID is used and how it could be abused.

Quality was earlier only an issue for the company?s quality departments but today is the entire organization involved in quality- and improvements work. With the customers in focus, both external and internal, quality and improvement work should be integrated in the daily activities. The management shall state goals and visions together with a policy. Through participation the correct requirements for a successful work are created.With SPC, statistics process control, there is an opportunity to perceive variations in the process and with the correct tools make it stable.

In Sweden there are 299 000 working in the construction industry. The construction industry is one of the industries where most accidents occur every year. During the last ten years there have been 111 death accidents in the construction industry and 48 of them were falling accidents. That means, in average, one death accident every month.Falling accidents gives serious injuries to the persons who are affected by them. It is anticipated that this report will investigate the factors beyond the falling accidents and also to present proposals that can decrease the number of falling accidents in the future.To secure a healthy and safe construction site it is of great importance that both the employers and the employees cooperate towards the same goal.

Toxic metals contaminate soil worldwide and thus serve as sever environmental threat. Therefore the purposes of this study were to investigate in which soil fractions that different heavy metals (Fe, As, Cu, Zn and Pb) could be found in contaminated soils and if it is possible to use sieving as a method for decontamination. Soil samples were collected from three different locations, the Nasa silver mine, the Blaiken-mine and Svalget environmental station. The samples were oven dried and later on sieved into six different fractions 8mm, 4 mm, 0.5 mm, 0.250mm, 0.063 mm and <0.063 mm. The fractions 4 mm, 0.5 mm and <0.063 mm from each location were analyzed in an x-ray fluorescence detector.

The first aim of this thesis is to descriptively identify and chart the activities of the strategic intelligence and environmental scanning that take place at the regional collaboration network Regionförbundet Örebro. This identification is essential in reaching the comprehensive and primary aim of the thesis: to discuss, through normative discourse, what the options of improvement are and in which ways systematic operations can be integrating parts in the organization. In order to offer guidance of development from the perspectives of environmental scanning, the question at issue has emanated from activities concerning the present methods of working at Regionförbundet Örebro.During the creation of this thesis, several interviews have been made with people who are regarded to be key roles within the regional collaboration network. An analysis has been made, based on governing documents and answers from the interviews, where possible improvements of the business have been identified. The inferences become parts of a greater potential of amelioration since they are presented as active solutions and proposals that can be directly adaptable to the organization.Our proposals of improvements/ameliorations are constituted by a number of concrete/explicit points such as: a wider public information supply and an introduction of several annual routines and methods..