After been told that an ordinary winter service for our combine should cost more than 20000 SEK, not included spare parts, I decided to write this paper about today?s requirement of the workshop on a farm. I think that the lack of proper premises is the reason way not more of the ordinary machinery maintenance or upkeep is performed on the farm. When I did my literature survey I found that the Swedish environmental code, set by the Swedish law regulate how drain or sewer should be built. The environmental code however leaves a lot for your own interpretation. It might not be so bad but it must be very hard for the local environmental office to interpretation the regulations, since they are the ones that gives permission for the sewer in your workshop.

This report describes the work with creating a CMS (Content Manager System). A CMS is a web tool so you easy can publish materials on your web page. With a CM Scan you can without any knowledge of programming web pages create and maintain a web page. This will result in that you and your organisation save time and money. You can also split the responsibility for the webpage in different roles, but still keep the control. We have chosen to create our CMS in a script language called php4 and with the database server MySQL, we have also used JavaScript a lot.

This report is written on commission by WSP Acoustics. The report studies the outdoor sound levels on school yards in Stockholm. The questions given by the company to be answered was what are the actual sound levels at diffrent school yards with low traffic noise and how can you construct a facade element that reduces the sound level from the outside and meet the indoor requirements. Mesurements for four hours was done at eight schools set north and south of the city centre. The measurement period included one school break and one lunch break.

With increasing energy prices and increased focus on the environment we saw the need for companies to get control over their energy use and their emission of carbon dioxid. An analysis tool that integrates both these areas is, with our knowledge, not available on the market today. Therefore, our project became to develop such a tool.By doing this degree project we would like to clarify that energy consumption and environmental impact are integrated. The less energy consumed by today?s society the smaller the environmental impact will be.

The Convention on Biological Diversity (CBD) promotes the Ecosystem Approach (EA). In this thesis it is analyzed how the EA approach could be applied to regional management of coastal areas in Sweden. The aim of this report is to compare management for preserving biodiversity on a landscape level in two regional coastal areas in Uppsala and Västra Götaland respectively. In Uppsala, one of the plans consists of a previous nature reserve and in Västra Götaland, a Regional landscape strategy has been established. The ecosystem approach is used as a theoretical framework in this thesis.

AbstractThis degree thesis was made in cooperation with Chematur Engineering in Karlskoga.Many of the environmental issues of today are a result of the motor traffic. Consumption of fossil fuels harms our environmental through formation of carbon dioxide and other greenhouse gases. To get under control with our environmental issues it?s important to find substitutes for oil that are both cheap and environmentally friendly. Ethanol has a long history as a motor fuel and is both enviromentally friendly has a high efficiency.According to the EU commissions directives for motor fuels, 5, 75 % of all the fuels in Sweden should be renewable in 2010.

This is an examination report in physical education. It focuses on the relation between excercise and nutrition and how this relation works in an icehockeygymnasium in a midsized city in Sweden. The training ratio for the students are 11-12 times a week which indirectly means that the nutricion is very important to them so that they have the strength to manage both training and school. In this examination report you can read about how the food is composed and how many meals the students are offered through their education program. The persons that I´ve interviewed are the head coach, the president of the school restaurant and three students.The students have practise in the noon two times a week, on Tuesdays and Thursdays.

Efforts to achieve a moisture proof construction process have proved to be considerably complicated, despite the knowledge and awareness that now exists within the moisture field. Materials, documents, templates and checklists are designed to be accessed but are not used anyway. This may be because such effort has not been prioritized and properly requirements have not existed from the commissioner of a building.This report illustrates how the commissioner of a building project can achieve a moisture proof building process by increasing knowledge, moisture proof planning, and implementation of security moisture routines. Proposals are given on how the commissioner of a building project can work to consistently bring a moisture proof building process in all stages. The difficulty with regular moisture proof efforts, the authors believe is mainly due to the following points:      Many different design solutions.      Lack of experience feedback.      Lack of communication.      Financial incentives.      Attitudes.The interviews in the report have conducted with the help of a qualitative analysis, while the survey has been done using a quantitative analytical method.

The purpose of this study has been to investigate advantages and problems with distributionsystem metering in substations. This report is a study in cooperation with Göteborg Energi.The analyses in this report are made for GENAB, a subsidiary company of Göteborg Energi.To analyse advantages and problems in advance is interesting information for GENAB. Theresult of the report could be based upon whether installation of metering in distributionsubstations will be implemented and in that case which kind of measurement that is relevant.The most relevant and strategic place to implement measurement is at the distributionsubstations on the secondary side (400V), this is due to the placement of the currenttransformers. The measurements in this study involve current, voltage, power, power factor,temperature, energy and power quality.Measuring instruments that are relevant to implement are intended to measure current,voltage, power, power factor, energy and, possibly, power quality in the same measuring unit.It is desirable to have a measuring instrument that measures both energy and power qualitybut since it is most often a cost question, it can be established that energy meters have a lowercost.Metering in distribution substations gives a better illustration of the power network. Thisresults in many advantages for GENAB.

This report includes common helminths, symtoms, routes of infection, diagnostic laboratory techniques and prophylactic methods to prevent infection. We have pointed out where there is a risk of zoonotic transmission and how to avoid contamination and infection. We have restricted the number of species to the most common helminths. Some of these helminths do not naturally occur in Sweden (yet) but are nevertheless of current interest when we travel across borders with our horses, dogs and cats. The diagnostic part of our report tells about different techniques to find an occurance of helminths in samples of faeces, blood, urine or saliva from a horse, dog or cat. We also write about some recommendations on treating parasitic infections and the development of anthelmintic resistant helminths that originates from incorrect use of anthelmintic drugs .

Report writers (sv rapporteringsverktyg) används för att skapa och hantera databasbaserade rapporter. Detta examensarbete handlar om Reporting Services, ett helt nytt rapporteringsverktyg från Microsoft. Syftet med examensarbetet var att utvärdera Reporting Services för att se vad verktyget har att erbjuda i förhållande till rapporteringsverktyg från andra tillverkare. En jämförelse mellan Reporting Services och rapporteringsverktyg från tre andra betydande tillverkare har gjorts. En djupare utvärdering av Reporting Services, där arkitektur, funktionalitet och andra egenskaper gåtts igenom grundligt, har också genomförts.

The purpose of this thesis was to design an electrical system for use in a ballistic test at the Swedish National laboratory of forensic science (SKL). The detector unit would use four main parts: coilsystem, transmitter, reciever and indicator. The coilsystem would be based on a balanced system using three coils. One that creates a magneticfield and the other two will sense the differences when a metallobject is in the coilsystem. This report starts out by investigating possible solutions for this specific task followed by a description of the physics that the metaldetector use.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.