This thesis calculates and compares the values of improved environmental quality due to future possible investment alternatives in biogas production facilities at Käppalaförbundets Reningsverk (Käppala Sewage Treatment Works) in an attempt to determine which alternative yields the highest such value. Käppala faces three investment alternatives for the usage of biogas. The alternatives are production of vehicle fuel, district heating and thirdly, heat and power production. Estimates of the value of environmental change are calculated for each of the three investment alternatives, and these estimates are then compared. The environmental change in question is the change in discharge levels of carbon dioxide (CO2), nitrogen oxides (NOx), sulphur dioxide (SO2) and particle matter.

Cumulative effects are seldom treated in Swedish Environmental Impact Assessments (EIA). This report treats these questions and which procedures and methods that can be used when assessing cumulative effects in EIA. This report is a literature study where also a case study is a part. The case study shows how existing methods for cumulative effects can be used in practice. The report is concentrated on biology and treats cumulative effects on premises of biodiversity and roads. Cumulative effects include both direct and indirect effects.

Large quantities of chemicals are used in all areas of society. The chemicals can be toxic and dangerous for the environment if used incorrectly. To protect people and the environment from dangerous chemicals, a good control of them and an active work to phase out hazardous substances in all areas where chemicals are present, are needed. Banverket and Vägverket handle in production a wide range of chemical products. Many of the products are dangerous to the environment, for those who work with them and to others who may come into contact with them.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.

To integrate environmental concerns into non-environmental policy making has become an important policy objective within the European Union. This essay investigates policy instruments in use to achieve environmental policy integration in the EU's transport sector respectively fisheries sector. The point of departure is a theoretical discussion about governance and the use of different policy instruments for environmental management at the EU-level. The focal point is the argumentation that regulatory policy instruments alone cannot achieve environmental policy integration satisfactory. By using Jordan et al's classification of so called "new" environmental policy instruments (market-based instruments, voluntary agreements and ecolabels) as complements to regulatory measures, the essay investigates whether the first-mentioned are used within the two sectors.

During the 90s most companies organized and adopted routines for their environmental work. This work included for example eco-efficiency improvements and the introduction of environmental managing systems. At the UN conference in Rio in 1992 the concept Sustainable development was defined, but it was not until about the year of 2000 that companies in Sweden shifted their work from environmental management to sustainable management. A consequence of this is that they now have to focus on environmental aspect in conjunction with social and economic aspects.The purpose of this study is to gain understanding of what a change of focus to sustainable development means for companies. Has the environmental work suffered in the competition with social/economical aspects under the new sustainable focus? How will the new way of working affect the balance between environmental and social aspects? Changes were studied in five companies by analysing their annual-, environmental- and sustainability reports and through interviews of sustainable managers.

BACKGROUND & During the last century, the Swedish chemical industry has developedPROBLEM: considerably in regard to respecting the environment. Following various discharges and pollutions during the first half of the 20th century, environmental concepts such as CSR, Responsible Care and REACH have developed in order to improve the situation. Today, environmental issues play a central role in the society, but what are the reasons behind this increased environmental commitment? PURPOSE & The purpose of this thesis paper is to study the driving forces behindDELIMITATIONS: the increased environmental awareness in companies. Is this mainly due to stricter legislations, or do factors like pressure from the general public, the industry or customers play a more vital role? Furthermore, do economic incentives exist, that make it interesting for companies to invest in environmental awareness? Since the chemical industry spans over a wide spectrum in regard to environmental issues, this paper will focus on a specific area of the industry.

One of the Swedish preschools many tasks is to identify the needs of a child and to shape an activity suited to their needs. This identification means a lot of times that a child is weighed and valued despite that the curriculum clearly states that no assessment is to be done in the Swedish preschool. To develop a preschool able to face all children regardless of their individual needs it?s necessary to change focus from child assessment to instead look at the work and environment in the whole preschool. A development of the activity might be seen as a work in progress whose primary goal is to improve the quality of work in preschool.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.

This thesis examines the process of securitization of the environmental issue in the United States. By using the theories of sectoral security and securitization by Barry Buzan and Ole Waever, commonly known as the Copenhagen school we go beyond the traditional security frames and examine where the environmental issue in the United States stand today within the securitization spectrum. The securitizing spectrum includes three levels in which an issue can be place: non-politicised, politicised and securitized.The problem, which we wish to address, is if there is a movement of the environmental issue in the United States towards becoming a securitized issue. In the light of these circumstances we also wish to explore who is behind the movement and also find out where the issue stand today. We do believe that Al Gore is a securitizing actor and examine his role in the movement of the environmental issueWe have come to the conclusion that there is an ongoing process of securitization in which the environmental issue have moved from being politicised to becoming securitized..

The purpose of this study was to increase the level of knowledge in the field of Environmental Impact Assessment (EIA) for wind power. The study includes six wind power farms in the County of Västerbotten in northern Sweden. The main questions were: What are the real dimensions of roadways and land claims for both roads and wind power turbines? How do those dimensions correlate with the dimensions stated in the EIA? Are there any differences in values of the dimensions between the wind power farms that are included in this study? The width of the roadways and the land claims for both roads and wind turbines in wind power farms were examined on site. The results from the examinations were compared with the dimensions available in the EIA for each wind power farm.

The purpose of this thesis is to examine how investments are justified in the Swedish data center industry, with a focus on cooling equipment. This is achieved through semi-structured interviews with 20 different interviewees. These interviewees represent different facets of the industry and facilitate an understanding of which factors, such as: investment costs, operating costs, reliability, environmental impact and the influence of external and internal actors, come into play and to which degree they impact the investment decision-making process. The results show that primarily low operating cost in the form of low energy consumption is the driving factor when it comes to the procurement of new equipment. A lower environmental impact is a positive side-effect of lower energy consumption.

The aim of this study was to examine the amounts of heavy metals in the sediment of a wetland constructed for stormwater treatment. The wetland is called Vattenparken and is located in the city of Enköping. The heavy metals which were analysed were Pb, Cd, Ni, Zn, Cu, Cr and Hg. The total metal concentrations were determined using HNO3 chemical extraction. From 8 sampling sites 5 sediment cores were taken.

The aim of my thesis was to do a Life Cycle Assessment (LCA) of an average thread tap that is manufactured by Dormer Tools AB, and to create a practical model that the company can use in order to study other thread taps from an environmental perspective.The method of LCA is used to investigate the environmental effects of a product during its life cycle. This is a gate-to-grave analysis with focus on steel and thread tap manufacturing, coating procedure, use, waste management and transports. Three common coating types were compared separately. Steel manufacturing answers for the highest energy and raw material consumption under the life cycle of the thread tap. Its emissions contribute to global warming, acidification and eutrophication above others.

The purpose of this study was to implement an energy analysis and environmental evaluation of the property Hemsta 12:16 in Gävle. Based on two different methods, Energy Balance calculation and Environmental Building, the result of the property's energy use, energy performance and environmental impacts are presented. Except that, measures to reduce final energy consumption are presented.      The proposed measures can reduce energy usage by 100 400 kWh / year, which represents a decrease of 18% of the present energy usage. This would represent a total savings of 63 000 SEK per year. In addition, the environmental performance is improved by adopting the suggested measures..