As part of an internship at Ericsson, this report was written to enhance the understanding of how it is to develop a system that is well established at the workplace. To improve an already existing system is not always as easy as many developers may think. In this report the pros and cons of developing an already existing system has been researched and analyzed. Do note that the results are only from one development of a specific system and that comparison of other developments has been made from other reports and not from experiencing it firsthand. It was found that the choices made can have an impact on further developing and it is important to write down what has been done.

Many of todays studies show that district heating is one of the betteralternatives as heating source because of its low environmental load.The energy source is often leftovers from other processes producing energy or waste, like garbage or chips.Electricity in combination with geothermal heating is another heating system that has increased sharply during the last years, and also this system decreases the discharges that have negative affectson the environment compared to several other heating methods.This report aims to, concentrated towards these two different heating systems, estimate the amounts of discharges they indirect cause and how the environment is affected.We have calculated the mean value for discharges of carbon dioxide, nitrogen oxide, sulphur oxide and dust generated from electrical power used in Sweden.Through interviews and research we have gained data for the same substances that district heating based on combustion of garbage and biofuel generates.We have also in cooperation with a housing company chosen a building we see representative for many of the new single-family houses built in Sweden today.Based on its shape and appearance we theoretically created three alternatives of the same house, each of them with climate screens different from each other.Together with the amounts of discharged environmental affecting substances, these houses were the base for our calculations and studies when investigating the different heating sources environmental effect.The results have thereafter been analyzed and discussed from different angles..

The exposed position of a social worker entails serious demands to their working environment. The experience of the working environment is coherent with various circumstances such as physical, technical and psychosocial factors. The aim of this study is to investigate how social workers in Gotland experience their psychosocial working environment. As a theoretical ground we describe the working environment regulations and it´s framework. Previous national and international research enlighten issues such as definitions of threat and violence, the significance of education and policys within social work, social support and riskfactors.

In today's producing companies, there is a high demand on early integrated productdevelopment. One way to facilitate communication between departments and collaborationbetween people and thereby enable early sharing of product information within the companyis to use PLM, Product Lifecycle Management.The CAD environment at Scania is at the moment being upgraded from Catia v4 to Catiav5. In this stage it is important that also the interacting computer systems in Scania?s PLMenvironment are adjusted and in the future join the development. Scania has an idea of howthese systems will be developed as the transition from Catia v4 to Catia v5 is being carriedout.

The thesis presented in this report has been made on behalf of Scania and their basic frame design department with the subject to solve an implementation of a weight sensing system in the chassis. The system is supposed to be implemented in the seat springs, and the reason for this is that all the force will have to go through the weight sensing transducers. With all the force going through the transducers the weight sensing system will not be sensitive for the differences in tolerances from manufacturing. The transducers could be pre-calibrated to avoid a calibration of the whole vehicle after it?s completed from the manufacturing line.Weight sensing systems is today a reality in trucks with air springs.

One of our reasons is that we think the subject usability is interesting, is that we think it is an important. Usability is maybe the most important element when you develop or choose a system because it can save money for the companies and give the users a more delightful and better work environment. The aim of the investigation is to find out if the implementation of a web portal is a direction to reach higher usability in a complex system that consists of several different interacting applications. The objective of our investigation is to show if the implementation of a web portal is a direction to reach higher usability in a complex system that consists of several different interacting applications. In our case we will try to see if Karlshamns AB:s recently implemented web portal is more useful than their previous application (Movex with interacting programs) One thought with the report is to give the system developers a perspective of how the usability can be in-house made applications versus standard applications.

This study is preformed at Westbaltic Components placed in Töcksfors Sweden. Themain target in this study is to make one of the company?s assembly lines better andmore effective. The assembly line constructs vending machines for different stores allover Europe.It will contain tobacco, snuff, cigarettes and shaving blades and many more similarproducts.The first step in our study is to locate the daily problems and find out a good way toreduce them and make them disappear. A good way to do this job easier was toconstruct a visualizing board.

AbstractThe aim of this essay is to explore how teachers and leisure educators can strengthen and increase students? self-confidence in different ways in their line of work. I chose this inquest for personal reasons and also because it will be of great aid for me since this is what I intend my future profession to be. For this inquest I have chosen to do five qualitative interviews and two unstructured observations. The inquest was also based on relevant literature connected to its purpose.The results show that self-confidence is linked to something the individuals accomplish and that self-esteem is the way they see themselves, an inner feeling.

Today the individual ventilated cage system (IVC-system) is a commonly used housing system for mice in research facilities. IVC systems have HEPA- filters and are designed to control both supply and exhausted air at cage level, as well as temperature and relative humidity in the cages. This creates an optimal environment for the mouse and at the same time a protection against the risk of cross-infection between cages and the outside environment. The aim of this study was to evaluate the health and welfare of breeding females and pups of two different strains of laboratory mice (NMRI nude mice and C57BL/6N) in three different kinds of IVC-systems; Arrowmight, Allentown and Tecniplast. The NMRI nude (Nu) females gave birth to 18 litters in Allentown, 16 litters in Arrowmight and 15 litters in Tecniplast.

The aim of this study is to look at the environmental effect on toddlers? social interactions during free play in two older and two newer preschools. Furthermore, we would like to investigate four preschool teachers? thoughts about the indoor environment when it comes to toddlers? interaction during free play.Qualitative methods containing interviews of the preschool teachers and observations of the children during their free playtime have been used to help us reach our conclusions. In addition, our theoretical conclusions have been derived from both the sociocultural perspective and the environmental psychology perspective.Our results have shown that variations in the preschool environment are of importance in the outcome of toddlers? different social interactions.

In this report a system for Rapid Control Prototyping, RCP, is evaluated through animplementation of the motor control methods Field Oriented Control, FOC, and Space VectorPulse Width Modulation, SVPWM. The evaluation emphasizes on time-consumption andresource utilization on the used hardware and on usability for of software.A new mechatronic laboratory is under development at ABB Corporate Research in Västerås. Itwill be used for both mechanical and motion control design using existing and new hardware.The control structure in a traditional robot system will be interfaced to a rapid prototypingsystem which should allow easy changes to algorithms at different levels in the system.The system designated for this project comes from National Instruments and constitutesLabVIEW Real-time and FPGA module as the software tools. The hardware is a NI Single-Board RIO (Reconfigurable Input Output), sbRIO, development board including a Field-Programmable Gate Array, FPGA, from Xilinx and a microprocessor from FreescaleSemiconductor. Graphical programming is performed in the LabVIEW environment, andthrough Xilinx tools the LabVIEW FPGA code is compiled to VHDL code.A pre-study was carried out to clarify the concept of RCP and investigate different systems forRCP and their traits.

Biogas is a renewable energy produced through anaerobic digestion, which means that organic matter is degraded by microorganisms under anaerobic conditions. The produced biogas can then be used for cogeneration, electricity, heat or upgraded to vehicle gas. Eskilstuna Energy & Environment AB has four digesters at Ekeby water sewage treatment plant, Eskilstuna. One of the biogas reactor (RK4) is equipped with a jet-mixing system while the remaining digester uses top-mixing. The mixing system is an important parameter to achieve optimum operating conditions for the process regarding gas production and degree of digestion.

The climate issue is a significant question, and the problem is mainly caused by human activities. Everyone can help to counteract the enhanced Greenhouse effect by reducing the amounts of energy they use and by not consuming more products then they need.Schools are some of societies many consumers and therefore contribute to the Greenhouse effect. The School also has an important task; to teach and disseminate knowledge and information about the climate and the environment. According to the Swedish National Agency for Education, Skolverket, must all schools regularly consider the environment and sustainable development throughout the entire education process. Unfortunately, this is not the case for many schools in Sweden today.One of many tools that can be used to coordinate environmental work and initiatives, and also to make it more efficient, is environmental management systems.

Emotron is a company specialised in developing, producing and marketing equipment to con-trol, monitor and protect processes and machinery driven by electric motors, with an applica-tion focus. Examples of uses for their products are fans, pumps, lifts and cranes.The project is to look at Emotrons end of line test. The company has seen that at the final test-ing there is a bottleneck that restricts the outflow and prevents an increase in the number of tested products.The purpose of this project is to review how Emotrons end-of-line test works today and if there is a possibility to make the test more efficient in such a way that the quality is not at risk, while increasing the outflow of tested products.The projects first step is to look at and analyse what is causing the bottleneck at the end-of-line. When the analysis is complete, the next step is to review whether there is a possibility to solve the bottleneck and if so in what way can this be done. Emotrons most overall objective of the project is to increase the outflow of the number of tested products without jeopardizing the quality.An analysis has been made on frequency inverters, soft starters and shaft power monitors.

This report is an outcome of a master degree project at Linköpings University in co-operation with Micronic Laser Systems AB. The purpose with this master degree project was to investigate how to implement a receiver in a data transfer system. The system consists of several data channels, where every channel consists of three parts: driver, transmission lines and receiver. The driver send low amplitude differential signals via the transmission lines to the receiver that amplifies and converts it to a single-ended signal. The receiver has to be fast and be able to feed an output signal with high voltage swing.